1. |
|
|
2. |
- Maurina Morais, Eduardo, 1989, et al.
(author)
-
Solvent-free synthesis of protic ionic liquids. Synthesis, characterization and computational studies of triazolium based ionic liquids
- 2022
-
In: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322. ; 360
-
Journal article (peer-reviewed)abstract
- A series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98–99% m/m) and dry (128–553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is constructed of only glass and chemically resistant polymer (PTFE and PVDF) parts, which avoid other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). This process is described in detail in the paper as well as in a video. The resulting ionic liquids were carefully analyzed by spectroscopic and thermal methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
|
|
3. |
- Maurina Morais, Eduardo, 1989
(author)
-
Synthesis of protic ionic liquids. Challenges and solutions for the synthesis of pure compounds.
- 2022
-
Licentiate thesis (other academic/artistic)abstract
- The urgent need to diversify our energy matrix is responsible for a renewed interest in fuel cell technology, which can use hydrogen gas, a renewable green fuel, as an energy source. This technology is currently a commercially available option, however, it still requires technological improvements before it can be widely used for different applications. One way this technology could potentially be improved is by increasing its temperature range of operation by developing new, anhydrous proton conducting materials. Protic ionic liquids, which are organic salts with low melting temperatures, are interesting candidates for this application, since they can conduct protons in the operational conditions of fuel cells and without the need of water. These compounds can be synthesized by a simple acid-base neutralization reaction, but certain considerations must be taken in order to obtain high quality (dry and pure) protic ionic liquids. In this thesis, a series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98-99% m/m) and dry (128-553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is consists of only glass and chemically resistant polymer(PTFE and PVDF) parts, which avoids other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). The resulting ionic liquids were carefully analyzed by spectroscopic and thermal analysis methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
|
|
4. |
- Sauer, Christopher, 1993
(author)
-
Green Aromatics: Catalytic Valorisation of bio-derived 2,5-dimethylfuran over Zeolites and Zeotypes
- 2022
-
Doctoral thesis (other academic/artistic)abstract
- This thesis discusses the use of biomass as a potentially green feedstock for the chemical industry in the urgent shift away from fossil resources. I elaborate on reasons why we cannot afford to burn virgin biomass for energy production, among them a variety of ecosystem services that forests and other lands provide. In addition, the utilisation of biomass should be focused on products that sequester and lock away carbon for more extended periods, e.g. timber, materials and chemicals. In particular, biomass can be used as an alternative "carbon neutral" feedstock for the chemical industry, where we can preserve the already existing chemical complexity in the bio-based molecules. One example is the upgrading of furans to benzene, toluene and xylene (BTX) aromatics with the help of zeolite catalysis. These aromatics are important commodity chemicals, where the shift to a bio-based resource could make use of already existing knowledge, catalyst and production infrastructure. However, research is necessary to understand these new feedstock molecules and their interaction with the catalysts and to enable the design of applicable catalysts. In order to study the interaction of the furans, in particular 2,5-dimethylfuran (2,5-dmf), I describe and discuss the development of an analytical methodology that utilises infrared spectroscopy and mass spectrometry for the on-line identification and quantification of product molecules during catalytic reactions. This on-line analysis method is then applied to the catalytic conversion of 2,5-dmf to aromatics over a range of zeolite and zeotype catalysts. In-depth studies with ammonia as a probe molecule of the catalytic active acid sites, as well as temperature programmed experiments with ammonia and 2,5-dmf give insights into product distribution, selectivity changes and deactivation of the catalyst. For example, olefins and aromatics are initially preferred products, while with increasing time on stream, the isomerisation of 2,5-dmf becomes dominant. The incorporation of Ga into the zeotype framework, resulting in a Ga-Silicate, shows how targeted catalyst design can increase overall aromatics production. This catalyst is also suitable for selective isomerisation of 2,5-dmf to 2,4-dimethylfuran, which has a rare substitution pattern. Finally, itwas found that the most valuable of BTX, p -xylene, can be produced more selectively when 2,5-dmf is pre-adsorbed onto zeolite ZSM-5 and then released during a temperature programmed product desorption.
|
|
5. |
|
|
6. |
- Bannan, T. J., et al.
(author)
-
A method for extracting calibrated volatility information from the FIGAERO-HR-ToF-CIMS and its experimental application
- 2019
-
In: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 12:3, s. 1429-1439
-
Journal article (peer-reviewed)abstract
- The Filter Inlet for Gases and AEROsols (FIGAERO) is an inlet specifically designed to be coupled with the Aerodyne High-Resolution Time-of-Flight Chemical Ionization Mass Spectrometer (HR-ToF-CIMS). The FIGAERO-HR-ToF-CIMS provides simultaneous molecular information relating to both the gas- and particle-phase samples and has been used to extract vapour pressures (VPs) of the compounds desorbing from the filter whilst giving quantitative concentrations in the particle phase. However, such extraction of vapour pressures of the measured particle-phase components requires use of appropriate, well-defined, reference compounds. Vapour pressures for the homologous series of polyethylene glycols (PEG) ((H-(O-CH 2 CH 2 ) n -OH) for n = 3 to n = 8), covering a range of vapour pressures (VP) (10 -1 to 10 -7 Pa) that are atmospherically relevant, have been shown to be reproduced well by a range of different techniques, including Knudsen Effusion Mass Spectrometry (KEMS). This is the first homologous series of compounds for which a number of vapour pressure measurement techniques have been found to be in agreement, indicating the utility as a calibration standard, providing an ideal set of benchmark compounds for accurate characterization of the FIGAERO for extracting vapour pressure of measured compounds in chambers and the real atmosphere. To demonstrate this, single-component and mixture vapour pressure measurements are made using two FIGAERO-HR-ToF-CIMS instruments based on a new calibration determined from the PEG series. VP values extracted from both instruments agree well with those measured by KEMS and reported values from literature, validating this approach for extracting VP data from the FIGAERO. This method is then applied to chamber measurements, and the vapour pressures of known products are estimated. © 2019 Author(s).
|
|
7. |
|
|
8. |
- Guo, Y. D., et al.
(author)
-
Identification of highly oxygenated organic molecules and their role in aerosol formation in the reaction of limonene with nitrate radical
- 2022
-
In: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 22:17, s. 11323-11346
-
Journal article (peer-reviewed)abstract
- Nighttime NO3-initiated oxidation of biogenic volatile organic compounds (BVOCs) such as monoterpenes is important for the atmospheric formation and growth of secondary organic aerosol (SOA), which has significant impact on climate, air quality, and human health. In such SOA formation and growth, highly oxygenated organic molecules (HOM) may be crucial, but their formation pathways and role in aerosol formation have yet to be clarified. Among monoterpenes, limonene is of particular interest for its high emission globally and high SOA yield. In this work, HOM formation in the reaction of limonene with nitrate radical (NO3) was investigated in the SAPHIR chamber (Simulation of Atmospheric PHotochemistry In a large Reaction chamber). About 280 HOM products were identified, grouped into 19 monomer families, 11 dimer families, and 3 trimer families. Both closed-shell products and open-shell peroxy radicals (RO2 center dot) 2 were observed, and many of them have not been reported previously. Monomers and dimers accounted for 47% and 47% of HOM concentrations, respectively, with trimers making up the remaining 6 %. In the most abundant monomer families, C10H15-17NO6-14, carbonyl products outnumbered hydroxyl products, indicating the importance of RO2 center dot termination by unimolecular dissociation. Both RO2 center dot autoxidation and alkoxy-peroxy pathways were found to be important processes leading to HOM. Time-dependent concentration profiles of monomer products containing nitrogen showed mainly second-generation formation patterns. Dimers were likely formed via the accretion reaction of two monomer RO2 center dot , and HOM-trimers via the accretion reaction between monomer RO2 center dot and dimer RO2 center dot. Trimers are suggested to play an important role in new particle formation (NPF) observed in our experiment. A HOM yield of 1.5%(+1.7%)(-0.7%) was estimated considering only first-generation products. SOA mass growth could be reasonably explained by HOM condensation on particles assuming irreversible uptake of ultra-low volatility organic compounds (ULVOCs), extremely low volatility organic compounds (ELVOCs), and low volatility organic compounds (LVOCs). This work provides evidence for the important role of HOM formed via the limonene +NO3 reaction in NPF and growth of SOA particles.
|
|
9. |
- Guo, Y., et al.
(author)
-
Reversible Structural Isomerization of Nature's Water Oxidation Catalyst Prior to O-O Bond Formation
- 2022
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:26, s. 11736-11747
-
Journal article (peer-reviewed)abstract
- Photosynthetic water oxidation is catalyzed by a manganese-calcium oxide cluster, which experiences five "S-states" during a light-driven reaction cycle. The unique "distorted chair"-like geometry of the Mn4CaO5(6)cluster shows structural flexibility that has been frequently proposed to involve "open" and "closed"-cubane forms from the S1 to S3states. The isomers are interconvertible in the S1 and S2states, while in the S3state, the open-cubane structure is observed to dominate inThermosynechococcus elongatus (cyanobacteria) samples. In this work, using density functional theory calculations, we go beyond the S3+Yzstate to the S3nYz•→ S4+Yzstep, and report for the first time that the reversible isomerism, which is suppressed in the S3+Yzstate, is fully recovered in the ensuing S3nYz•state due to the proton release from a manganese-bound water ligand. The altered coordination strength of the manganese-ligand facilitates formation of the closed-cubane form, in a dynamic equilibrium with the open-cubane form. This tautomerism immediately preceding dioxygen formation may constitute the rate limiting step for O2formation, and exert a significant influence on the water oxidation mechanism in photosystem II.
|
|
10. |
|
|
11. |
- Le Breton, Michael, 1986, et al.
(author)
-
Application of a FIGAERO ToF CIMS for on-line characterization of real-world fresh and aged particle emissions from buses
- 2019
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 53:3, s. 244-259
-
Journal article (peer-reviewed)abstract
- © 2019, © 2019 The Author(s). Published with license by Taylor & Francis Group, LLC. On-line chemical characterization of real-world particle emissions from 13 transit buses was performed using a chemical ionization mass spectrometer (CIMS) equipped with a filter inlet for gases and aerosols (FIGAERO). In addition to the fresh emissions the emissions were artificially aged using a potential aerosol mass reactor (Go:PAM). The buses studied were running on different fuel types (diesel, compressed natural gas, and rapeseed methyl ester) and exhaust after-treatment systems (selective catalytic reduction (SCR), exhaust gas recirculation (EGR), and a three-way catalyst). When evaluating emissions from passing exhaust plumes using the FIGAERO ToF-CIMS, two technical features were highlighted from this work, the use of high mass calibrants and the factor enhancement method to be able to filter important compounds from mass spectra including hundreds of species. Here, acetate was used as the reagent ion to enable detection of highly oxygenated species in the exhaust particle emissions with potential high toxicity and/or secondary organic aerosol formation (SOA) potential. The acetate ionization scheme accounted for 4% to 46% of the total emitted particulate mass through identification of 61 species in the spectra. For aged emission the various fuel types provided overlapping species that could explain up to 19% of the aged emissions. This is hypothesized to come from the oxidation of engine lubrication oil, thus a common source for various fuels which was further supported by laboratory measurements. Specific markers from the SCR technology, such as urea oxidation products and further byproducts from hydrolysis were identified and attributed to reactions of isocyanic acid.
|
|
12. |
- Le Breton, Michael, 1986, et al.
(author)
-
Chlorine oxidation of VOCs at a semi-rural site in Beijing: significant chlorine liberation from ClNO2 and subsequent gas- and particle-phase Cl-VOC production
- 2018
-
In: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 18:17, s. 13013-13030:18, s. 13013-13030
-
Journal article (peer-reviewed)abstract
- Nitryl chloride (ClNO2) accumulation at night acts as a significant reservoir for active chlorine and impacts the following day's photochemistry when the chlorine atom is liberated at sunrise. Here, we report simultaneous measurements of N2O5 and a suite of inorganic halogens including ClNO2 and reactions of chloride with volatile organic compounds (Cl-VOCs) in the gas and particle phases utilising the Filter Inlet for Gas and AEROsols time-of-flight chemical ionisation mass spectrometer (FIGAERO-ToF-CIMS) during an intensive measurement campaign 40 km northwest of Beijing in May and June 2016. A maximum mixing ratio of 2900 ppt of ClNO2 was observed with a mean campaign nighttime mixing ratio of 487 ppt, appearing to have an anthropogenic source supported by correlation with SO2, CO and benzene, which often persisted at high levels after sunrise until midday. This was attributed to such high mixing ratios persisting after numerous e-folding times of the photolytic lifetime enabling the chlorine atom production to reach 2.3 x 10(5) molecules cm(-3) from ClNO2 alone, peaking at 09:30 LT and up to 8.4 x 10(5) molecules cm(-3) when including the supporting inorganic halogen measurements. Cl-VOCs were observed in the particle and gas phases for the first time at high time resolution and illustrate how the iodide ToF-CIMS can detect unique markers of chlorine atom chemistry in ambient air from both biogenic and anthropogenic sources. Their presence and abundance can be explained via time series of their measured and steady-state calculated precursors, enabling the assessment of competing OH and chlorine atom oxidation via measurements of products from both of these mechanisms and their relative contribution to secondary organic aerosol (SOA) formation.
|
|
13. |
- Li, J. J., et al.
(author)
-
Characterization of Aerosol Aging Potentials at Suburban Sites in Northern and Southern China Utilizing a Potential Aerosol Mass (Go:PAM) Reactor and an Aerosol Mass Spectrometer
- 2019
-
In: Journal of Geophysical Research-Atmospheres. - : American Geophysical Union (AGU). - 2169-897X .- 2169-8996. ; 124:10, s. 5629-5649
-
Journal article (peer-reviewed)abstract
- Aerosol mass spectrometry was used to characterize submicron aerosols before and after aging in a Gothenburg Potential Aerosol Mass (Go:PAM) reactor at two suburban sites in China, one in northern China at Changping (CP), Beijing, and a second in southern China at Hong Kong (HK). Organic aerosol (OA) dominated in the ambient nonrefractory particulate matter <1m (NR-PM1) for both CP (42-71%) and HK (43-61%), with a large contribution from secondary OA factors that were semivolatile oxygenated (SVOOA) and low-volatility oxygenated (LVOOA). Under constant OH exposure, OA enhancement (78-98%) dominated the NR-PM1 mass increment at both sites, while nitrate was enhanced the most among the inorganic species (7-9%). Overall, the CP site exhibited higher OA oxidation potential and more enhancement of SVOOA than LVOOA (7.5 vs. 2.7g/m(3)), but the reverse was observed in HK (0.8 vs. 2.6g/m(3)). In CP, more enhancement of the less oxygenated SVOOA suggests that aerosol aging was more sensitive to the abundant locally emitted primary OA and volatile organic compound precursors. On the contrary, the more formation of the highly oxidized LVOOA in HK indicates that aerosol aging mainly escalated the degree of oxygenation of OA as ambient aerosol was already quite aged and there was a lack of volatile organic compound precursors. The comparative measurements using the same oxidation system reveal distinct key factors and mechanisms that influence secondary aerosol formation in two suburban locations in China, providing scientific insights to assist formulation of location-specific mitigation measures of secondary pollution. Plain Language Summary Atmospheric submicron particles have significant impacts on the climate and human health. A large part of these particles are formed secondarily through successive aging of primary emissions. To study such aging processes, we used a reactor that can provide highly oxidizing conditions to simulate the oxidation of ambient aerosols at accelerated rates. An online mass spectrometer was connected after the reactor to measure changes in aerosol mass concentration and chemical composition between the ambient samples and the oxidized ones. We presented the first comparative measurements of the aging potentials of ambient aerosols in two suburban sites in northern and southern China (Changping District in Beijing, and Hong Kong). Results showed that generally aerosols at the Changping site had higher aging potentials after passing through the oxidation reactor, probably due to more local emissions of precursors, while air masses in Hong Kong were already in a higher oxidation state with lower aging potentials, mainly because of strong impacts from long-range transported pollution sources. Distinct aerosol aging pathways related to different ambient precursors were observed at the two sites. Understanding of the different characteristics of aerosol aging processes can lead to advances in air quality modeling and pollution management.
|
|
14. |
- Mohr, Claudia, et al.
(author)
-
Molecular identification of organic vapors driving atmospheric nanoparticle growth
- 2019
-
In: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 10
-
Journal article (peer-reviewed)abstract
- Particles formed in the atmosphere via nucleation provide about half the number of atmospheric cloud condensation nuclei, but in many locations, this process is limited by the growth of the newly formed particles. That growth is often via condensation of organic vapors. Identification of these vapors and their sources is thus fundamental for simulating changes to aerosol-cloud interactions, which are one of the most uncertain aspects of anthropogenic climate forcing. Here we present direct molecular-level observations of a distribution of organic vapors in a forested environment that can explain simultaneously observed atmospheric nanoparticle growth from 3 to 50nm. Furthermore, the volatility distribution of these vapors is sufficient to explain nanoparticle growth without invoking particle-phase processes. The agreement between observed mass growth, and the growth predicted from the observed mass of condensing vapors in a forested environment thus represents an important step forward in the characterization of atmospheric particle growth.
|
|
15. |
- Artemenko, A., et al.
(author)
-
Reference XPS spectra of amino acids
- 2021
-
Conference paper (peer-reviewed)abstract
- In this report we present XPS data for five amino acids (AAs) (tryptophan, methionine, glutamine, glutamic acid, and arginine) with different side chain groups measured in solid state (powder form). The theoretically and experimentally obtained chemical structure of AAs are compared. Here, we analyse and discuss C 1 s, N 1 s, O 1s and S 2p core level binding energies, FWHMs, atomic concentrations of the functional groups in AAs. The experimentally obtained and theoretically calculated ratio of atomic concentrations are compared. The zwitterionic nature of methionine and glutamine in solid state was determined from protonated amino groups in N 1s peak and deprotonated carboxylic groups in the C 1s spectrum. The obtained XPS results for AAs well correspond with previously reported data.
|
|
16. |
- Barišić, Antun, et al.
(author)
-
Experimental Data Contributing to the Elusive Surface Charge of Inert Materials in Contact with Aqueous Media
- 2021
-
In: Colloids and interfaces. - : MDPI. - 2504-5377. ; 5:1
-
Journal article (other academic/artistic)abstract
- We studied the charging of inert surfaces (polytetrafluoroethylene, i.e., PTFE; graphite; graphene; and hydrophobic silica) using classical colloid chemistry approaches. Potentiometric titrations showed that these surfaces acquired less charge from proton-related reactions than oxide minerals. The data from batch-type titrations for PTFE powder did not show an effect of ionic strength, which was also in contrast with results for classical colloids. In agreement with classical colloids, the electrokinetic results for inert surfaces showed the typical salt level dependence. In some cases, the point of zero net proton charge as determined from mass and tentatively from acid–base titration differed from isoelectric points, which has also been previously observed, for example by Chibowski and co-workers for ice electrolyte interfaces. Finally, we found no evidence for surface contaminations of our PTFE particles before and after immersion in aqueous solutions. Only in the presence of NaCl-containing solutions did cryo-XPS detect oxygen from water. We believe that our low isoelectric points for PTFE were not due to impurities. Moreover, the measured buffering at pH 3 could not be explained by sub-micromolar concentrations of contaminants. The most comprehensive explanation for the various sets of data is that hydroxide ion accumulation occurred at the interfaces between inert surfaces and aqueous solutions.
|
|
17. |
- Brinck, Tore, et al.
(author)
-
Green Energetic Materials, Chapter 2: "Theoretical Design of Green Energetic Materials: Predicting Stability, Detection, Synthesis and Performance"
- 2014
-
In: Green Energetic Materials. - 9781119941293 ; , s. 15-44
-
Book chapter (other academic/artistic)abstract
- Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
|
|
18. |
- Brinck, T, et al.
(author)
-
Green Energetic Materials, Chapter 7: "Green propellants Based on Dinitramide Salts: Mastering Stability and Chemical Compatibility Issues"
- 2014
-
In: Green Energetic Materials, kapitel 7. - 9781119941293 ; , s. 179-204
-
Book chapter (other academic/artistic)abstract
- Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
|
|
19. |
- Nyström-Larsson, Ingalill, 1969, et al.
(author)
-
Materialanalys av sydsvenskt bonadsmåleri
- 2007
-
In: Rapport: Sammanfattning av Riksantikvarieämbetets seminarieserie 2007 kring pågående FoU-projekt. ; , s. 23-24
-
Conference paper (other academic/artistic)abstract
- Bonadsmåleriet hade sin storhetstid 1750-1850, och var influerat av medeltida kalkmåleri och bildvävnad i kyrkorna. Bonaderna var temporära och prydde stugorna till fest. Motiven kan vara både bibliska och profana. Materialet är tyger (återanvända och hopfogade) och senare även papper. Mot slutet av perioden övergår hantverket i massproduktion. Tidigare har bonaderna framför allt studerats inom humaniora (exempelvis etnologi) och ett naturvetenskapligt perspektiv har saknats. Därför finns mycket knapphändiga uppgifter om materialet. Syftet med projektet är att: • Kartlägga materialanvändningen • Tolka och förstå materialutvecklingen • Klarlägga innehållet i de otydliga trivialnamnen • Bygga upp ett referensmaterial Genomförande Ett antal frågeställningar har satts upp inför studiet: • Vilka materialval har man gjort? • Skiljer måleriteknik, färg, materialval mellan bonader, och går det att urskilja geografiska skillnader eller är det en tidsmässig utveckling? • Kan bonader attribueras utifrån materialval och färgval? • Vad är det för pigment som döljs i trivialnamnen? Skriftliga källor räcker inte för att svara på dessa frågor utan måste komplet-teras med naturvetenskapliga analyser. Diskussion kring RÄA-seminariets specifika frågeställningar På vad sätt bidrar ert projekt till kunskapsuppbyggnaden inom ert område? • Projektet är också ett pilotprojekt och den kunskap som vinns kan också appliceras på annat än bonadsmåleri. Utifrån resultaten kan man också gå vidare och titta på handelsvägar, infrastruktur etc. • En referensdatabas byggs upp och kan kanske också användas för an-nat material. På vilket sätt skulle resultaten från ert projekt kunna tillämpas mer konkret inom kulturmiljösektorn? • Ett viktigt mål är att hitta analysmetoder som inte förstör materialet, och som helst kan göras på plats så att materialet inte behöver flyttas (Raman spektroskopi). • Som konstaterades ovan kan resultaten från den kemiska analysen visa att en sådan kan komplettera traditionella historiska metoder också inom andra områden än bonadsmåleri. Frågor och öppen diskussion • Ännu har man inte hittat några speciella pigment eller färger, men analysen är inte klar. • Analysmaterialet som valts ut är signerade bonader. • Eftersom uppbyggandet av referensdatabaser är centralt i konserva-torns arbete är det viktigt att sprida resultaten av projektet.
|
|
20. |
- Halldin Stenlid, Joakim, 1987-
(author)
-
Computational Studies of Chemical Interactions: Molecules, Surfaces and Copper Corrosion
- 2017
-
Doctoral thesis (other academic/artistic)abstract
- The chemical bond – a corner stone in science and a prerequisite for life – is the focus of this thesis. Fundamental and applied aspects of chemical bonding are covered including the development of new computational methods for the characterization and rationalization of chemical interactions. The thesis also covers the study of corrosion of copper-based materials. The latter is motivated by the proposed use of copper as encapsulating material for spent nuclear fuel in Sweden.In close collaboration with experimental groups, state-of-the-art computational methods were employed for the study of chemistry at the atomic scale. First, oxidation of nanoparticulate copper was examined in anoxic aqueous media in order to better understand the copper-water thermodynamics in relation to the corrosion of copper material under oxygen free conditions. With a similar ambition, the water-cuprite interface was investigated with regards to its chemical composition and reactivity. This was compared to the behavior of methanol and hydrogen sulfide at the cuprite surface.An overall ambition during the development of computational methods for the analysis of chemical bonding was to bridge the gap between molecular and materials chemistry. Theory and results are thus presented and applied in both a molecular and a solid-state framework. A new property, the local electron attachment energy, for the characterization of a compound’s local electrophilicity was introduced. Together with the surface electrostatic potential, the new property predicts and rationalizes regioselectivity and trends of molecular reactions, and interactions on metal and oxide nanoparticles and extended surfaces.Detailed atomistic understanding of chemical processes is a prerequisite for the efficient development of chemistry. We therefore envisage that the results of this thesis will find widespread use in areas such as heterogeneous catalysis, drug discovery, and nanotechnology.
|
|
21. |
- Hedlund, Artur, et al.
(author)
-
Microstructures of cellulose coagulated in water and alcohols from 1-ethyl-3-methylimidazolium acetate : contrasting coagulation mechanisms
- 2019
-
In: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 26:3, s. 1545-1563
-
Journal article (peer-reviewed)abstract
- Abstract: Coagulation of cellulose solutions is a process whereby many useful materials with variable microstructures and properties can be produced. This study investigates the complexity of the phase separation that generates the structural heterogeneity of such materials. The ionic liquid, 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]), and a co-solvent, dimethylsulfoxide (DMSO), are used to dissolve microcrystalline cellulose in concentrations from 5 to 25 wt%. The solutions are coagulated in water or 2-propanol (2PrOH). The coagulated material is then washed and solvent exchanged (water → 2PrOH → butanone → cyclohexane) in order to preserve the generated microstructures upon subsequent drying before analysis. Sweep electron microscopy images of 50 k magnification reveal open-pore fibrillar structures. The crystalline constituents of those fibrils are estimated using wide-angle X-ray spectroscopy and specific surface area data. It is found that the crystalline order or crystallite size is reduced by an increase in cellulose concentration, by the use of the co-solvent DMSO, or by the use of 2PrOH instead of water as the coagulant. Because previous theories cannot explain these trends, an alternative explanation is presented here focused on solid–liquid versus liquid–liquid phase separations. Graphical abstract: [Figure not available: see fulltext.].
|
|
22. |
- Moth-Poulsen, Kasper, 1978
(author)
-
Molecular Systems for Solar Thermal Energy Storage and Conversion
- 2013
-
In: Organic Synthesis and Molecular Engineering. - Hoboken, NJ, USA : John Wiley & Sons, Inc.. ; , s. 179-196
-
Book chapter (other academic/artistic)abstract
- Using a synthetic approach to organic materials chemistry, this book sets forth tested and proven methods and practices that make it possible to engineer organic molecules offering special properties and functions. Throughout the book, plenty of real-world examples demonstrate the countless possibilities of creating one-of-a-kind molecules and supramolecular systems to support a broad range of applications. The book explores applications in both materials and bioorganic chemistry, including molecular electronics, energy storage, sensors, nanomedicine, and enzyme engineering.Organic Synthesis and Molecular Engineering consists of fourteen chapters, each one contributed by one or more leading international experts in the field. The contributions are based on a thorough review and analysis of the current literature as well as the authors' firsthand experience in the lab engineering new organic molecules. Designed as a practical lab reference, the book offers:Tested and proven synthetic approaches to organic materials chemistryMethods and practices to successfully engineer functionality into organic moleculesExplanations of the principles and concepts underlying self-assembly and supramolecular chemistryGuidance in selecting appropriate structural units used in the design and synthesis of functional molecules and materialsCoverage of the full range of applications in materials and bioorganic chemistryA full chapter on graphene, a new topic generating intense researchOrganic Synthesis and Molecular Engineering begins with core concepts, molecular building blocks, and synthetic tools. Next, it explores molecular electronics, supramolecular chemistry and self-assembly, graphene, and photoresponsive materials engineering. In short, it offers everything researchers need to fully grasp the underlying theory and then build new molecules and supramolecular systems.
|
|
23. |
- Nicholls, Ian A., et al.
(author)
-
Rational design of biomimetic molecularly imprinted materials : theoretical and computational strategies for guiding nanoscale structured polymer development
- 2011
-
In: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 400:6, s. 1771-1786
-
Research review (peer-reviewed)abstract
- In principle, molecularly imprinted polymer science and technology provides a means for ready access to nano-structured polymeric materials of predetermined selectivity. The versatility of the technique has brought it to the attention of many working with the development of nanomaterials with biological or biomimetic properties for use as therapeutics or in medical devices. Nonetheless, the further evolution of the field necessitates the development of robust predictive tools capable of handling the complexity of molecular imprinting systems. The rapid growth in computer power and software over the past decade has opened new possibilities for simulating aspects of the complex molecular imprinting process. We present here a survey of the current status of the use of in silico-based approaches to aspects of molecular imprinting. Finally, we highlight areas where ongoing and future efforts should yield information critical to our understanding of the underlying mechanisms sufficient to permit the rational design of molecularly imprinted polymers.
|
|
24. |
- Rahm, Martin, et al.
(author)
-
The Molecular Surface Structure of Ammonium and Potassium Dinitramide : A Vibrational Sum Frequency Spectroscopy and Quantum Chemical Study
- 2011
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:21, s. 10588-10596
-
Journal article (peer-reviewed)abstract
- Vibrational sum frequency spectroscopy (VSFS) and quantum chemical modeling have been employed to investigate the molecular surface structure of ammonium and potassium dinitramide (ADN and KDN) crystals. Identification of key vibrational modes was made possible by performing density functional theory calculations of molecular clusters. The surface of KDN was found to be partly covered with a thin layer of the decomposition product KNO3, which due to its low thickness was not detectable by infrared and Raman spectroscopy. In contrast, ADN exhibited an extremely inhomogeneous surface, on which polarized dinitramide anions were present, possibly together with a thin layer of NH4NO3. The intertwined use of theoretical and experimental tools proved indispensable in the analysis of these complex surfaces. The experimental verification of polarized and destabilized dinitramide anions stresses the importance of designing surface-active polymer support, stabilizers, and/or coating agents, in order to enable environmentally friendly ADN-based solid-rocket propulsion.
|
|
25. |
- Singh, Shivangi, 1996
(author)
-
Investigating hydrothermal stability and influence of water on the activity of Cu-CHA catalysts for NH3-SCR
- 2024
-
Licentiate thesis (other academic/artistic)abstract
- Selective catalytic reduction of nitrogen oxides (NOx) with NH3 as a reducing agent (NH3- SCR) is a leading technology for diesel exhaust emission control. Cu-exchanged zeolites with the chabazite structure (Cu-CHA) have emerged as the preferred catalysts thanks to its high activity and hydrothermal stability. Hydrothermal stability is related to dealumination, i.e. removal of aluminum from the zeolite framework to form extraframework aluminum, at high temperatures in the presence of water vapor. Copperexchanged chabazite (Cu-CHA) zeolites have higher hydrothermal stability compared to H-chabazite (H-CHA). To understand the delayed dealumination of Cu-CHA catalysts, we have investigated the reaction paths for dealumination in H-CHA and Cu-CHA using density functional theory (DFT) calculations combined with microkinetic modeling. We find that Cu-CHA and H-CHA follow similar four-step hydrolysis processes, yet the dealumination of Cu-CHA has higher energy barriers, suggesting stabilization of the CHA structure by Cu ions. Furthermore, the preferred reaction product upon complete dealumination of Cu-CHA is a copper-aluminate like species bound to the zeolite framework. The microkinetic analysis quantifies the increased stability of Cu-CHA as compared to H-CHA. In addition to the high-temperature dealumination, we investigated the role of water on low-temperature SCR by experimentally measuring the activity and reaction order of water. The reaction order of water is found to be increasingly negative with increasing water pressure. DFT calculations reveal that water blocks the active Cu-sites and a DFT-based microkinetic model reproduces the measured change of reaction order with water pressure.
|
|
26. |
- Sun, Bing, et al.
(author)
-
Ion transport in polycarbonate based solid polymer electrolytes : experimental and computational investigations
- 2016
-
In: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 18:14, s. 9504-9513
-
Journal article (peer-reviewed)abstract
- Among the alternative host materials for solid polymer electrolytes (SPEs), polycarbonates have recently shown promising functionality in all-solid-state lithium batteries from ambient to elevated temperatures. While the computational and experimental investigations of ion conduction in conventional polyethers have been extensive, the ion transport in polycarbonates has been much less studied. The present work investigates the ionic transport behavior in SPEs based on poly(trimethylene carbonate) (PTMC) and its co-polymer with epsilon-caprolactone (CL) via both experimental and computational approaches. FTIR spectra indicated a preferential local coordination between Li+ and ester carbonyl oxygen atoms in the P(TMC20CL80) co-polymer SPE. Diffusion NMR revealed that the co-polymer SPE also displays higher ion mobilities than PTMC. For both systems, locally oriented polymer domains, a few hundred nanometers in size and with limited connections between them, were inferred from the NMR spin relaxation and diffusion data. Potentiostatic polarization experiments revealed notably higher cationic transference numbers in the polycarbonate based SPEs as compared to conventional polyether based SPEs. In addition, MD simulations provided atomic-scale insight into the structure-dynamics properties, including confirmation of a preferential Li+-carbonyl oxygen atom coordination, with a preference in coordination to the ester based monomers. A coupling of the Li-ion dynamics to the polymer chain dynamics was indicated by both simulations and experiments.
|
|
27. |
- Wiklander, Jesper G., 1974-, et al.
(author)
-
Towards a synthetic avidin mimic
- 2011
-
In: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 400:5, s. 1397-1404
-
Journal article (peer-reviewed)abstract
- A series of streptavidin-mimicking molecularly imprinted polymers has been developed and evaluated for their biotin binding characteristics. A combination of molecular dynamics and NMR spectroscopy was used to examine potential polymer systems, in particular with the functional monomers methacrylic acid and 2-acrylamidopyridine. The synthesis of copolymers of ethylene dimethacrylate and one or both of these functional monomers was performed. A combination of radioligand binding studies and surface area analyses demonstrated the presence of selectivity in polymers prepared using methacrylic acid as the functional monomer. This was predicted by the molecular dynamics studies showing the power of this methodology as a prognostic tool for predicting the behavior of molecularly imprinted polymers.
|
|
28. |
|
|
29. |
- Sznitko, L., et al.
(author)
-
Low-threshold stimulated emission from lysozyme amyloid fibrils doped with a blue laser dye
- 2015
-
In: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 106:2
-
Journal article (peer-reviewed)abstract
- © 2015 AIP Publishing LLC. Amyloid fibrils are excellent self-assembling nanotemplates for organic molecules such as dyes. Here, we demonstrate that laser dye-doped lysozyme type fibrils exhibit significantly reduced threshold for stimulated emission compared to that observed in usual matrices. Laser action was studied in slab planar waveguides of the amyloids doped with Stilbene 420 laser dye prepared using a film casting technique. The lowering of the threshold of stimulated emission is analyzed in the context of intrinsic structure of the amyloid nanotemplates, electrostatic interaction of different microstructures with dye molecules, as well as material properties of the cast layers. All these factors are considered to be of importance for introducing gain for random laser operation.
|
|
30. |
- Börjesson, Karl, 1982, et al.
(author)
-
Conjugated anthracene dendrimers with monomer-like fluorescence
- 2014
-
In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 4:38, s. 19846-19850
-
Journal article (peer-reviewed)abstract
- Two generations of highly emissive conjugated anthracene dendrimers containing up to 9 anthracene units are presented. In these dendrimers, anthracene-like absorption and emission properties are preserved due to the relatively weak electronic coupling between the anthracene units, while evidence of fast crosstalk within the molecular framework is still observed.
|
|
31. |
- Arvidsson, Adam, 1990
(author)
-
Partial methane oxidation from electronic structure calculations
- 2017
-
Licentiate thesis (other academic/artistic)abstract
- Investigating catalytic reactions with computational methods is a powerful approach to understand fundamental aspects of catalytic reactions and find ways to guide catalytic design. Partial methane oxidation is one example of a reaction with intriguing challenges, where a detailed atomistic approach may help to unravel the bottlenecks of this, as of yet, inefficient reaction. Although methane only needs one oxygen atom for conversion to methanol, the direct oxidation is difficult; it is in fact so difficult that at many oil extraction sites, the methane that inevitably accompanies the crude oil is flared into carbon dioxide and water as gas-phase methane is too inconvenient to store and transport.The main challenge with partial oxidation of methane is to selectively control the oxidation and steer it towards methanol and prevent over-oxidation to CO2. There exist natural enzymes that can partially oxidize methane to methanol at ambient pressure and temperature, although very slowly. One inorganic analogue to these naturally occurring enzymes are zeolites, a porous material that can readily be synthesized and that have been shown to convert methane to methanol at ambient conditions with a high selectivity (>90 %). This has been realized for zeolites ion-exchanged with different metals, such as iron, cobalt, nickel, and copper. Although there have been many attempts to determine the active site for the reaction, there is still no consensus. One candidate that has been put forth is a [Cu-O-Cu]2+ motif experimentally characterized in the ZSM-5 zeolite. In this thesis, partial oxidation of methane is investigated, focusing on this dimer motif. By combining density functional theory calculations with microkinetic modelling, the catalytic performance of the dimer motif is investigated with a simple reaction mechanism for copper, but also with the copper atoms exchanged with nickel, cobalt, iron, silver, or gold. From these results, it is clear that this particular dimer site is a relevant candidate only for copper, and can be excluded in the continued search for active sites in nickel, cobalt, and iron ion-exchanged ZSM-5.To further understand how methanol is formed and interacts with Cu-ZSM-5, experimental and calculated infrared frequencies are compared for methanol and other adsorbates. The partial oxidation of methane is also studied for other systems with oxidants other than oxygen. In particular, methane oxidation with H2S to CH3SH and H2 is explored on molybdenum sulfide clusters.
|
|
32. |
- Khokarale, Santosh G., et al.
(author)
-
One-Pot, Metal-Free Synthesis of Dimethyl Carbonate from CO2 at Room Temperature
- 2020
-
In: Sustainable Chemistry. - : MDPI. - 2673-4079. ; 1:3, s. 298-314
-
Journal article (peer-reviewed)abstract
- Herein, we report on the metal-free, one-pot synthesis of industrially important dimethyl carbonate (DMC) from molecular CO2 under ambient conditions. In this process, initially the CO2 was chemisorbed through the formation of a switchable ionic liquid (SIL), [DBUH] [CH3CO3], by the interaction of CO2 with an equivalent mixture of organic superbase 1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU) and methanol. The obtained SIL further reacted with methyl iodide (CH3I) to form DMC. The synthesis was carried out in both dimethyl sulfoxide (DMSO) and methanol. Methanol is preferred, as it not only served as a reagent and solvent in CO2 capture and DMC synthesis, but it also assisted in controlling the side reactions between chemical species such as CH3I and [DBUH]+ cation and increased the yield of DMC. Hence, the use of methanol avoided the loss of captured CO2 and favored the formation of DMC with high selectivity. Under the applied reaction conditions, 89% of the captured CO2 was converted to DMC. DBU was obtained, achieving 86% recovery of its salts formed during the synthesis. Most importantly, in this report we describe a simple and renewable solvent-based process for a metal-free approach to DMC synthesis under industrially feasible reaction conditions.
|
|
33. |
- Liu, Yuan
(author)
-
Theoretical Studies of Natural Gas Hydrates and H-bonded Clusters and Crystals
- 2016
-
Doctoral thesis (other academic/artistic)abstract
- In this thesis H-bonded systems (natural gas hydrates, water clusters, and crystal ice) are studied by density functional theory (DFT) computations.Natural gas hydrates (NGHs) play an important role in energy and environmental fields: NGHs are considered as a promising backup energy resource in the near-future due to their tremendous carbon content; improper exploration of NGHs could induce geological disasters and aggravate the greenhouse effect. In addition, many technologies based on gas hydrates are being applied and developed. The thermodynamic stabilities of various water cavities in different clathrate crystalline phases occupied by hydrocarbon gas molecules are studied by dispersion-corrected hybrid functionals. The Raman spectra of C-C and C-H stretching vibrations of hydrocarbon molecules in various water cavities in the solid state are derived. The trends of C-H stretching vibrational frequencies are found to follow the prediction by the “loose cage ─| tight cage” model. In addition, the trends and origins of 13C NMR chemical shifts of hydrocarbon molecules in various NGHs are presented. These theoretical results will enlarge the database of C-C and C-H stretching vibrational frequencies and 13C NMR parameters of hydrocarbon molecules in NGHs, and provide valuable information to help identify the types of clathrate phases and varieties of guest molecules included in NGHs samples taken from natural sites.The behavior of water clusters may help to understand the properties of its liquid and solid states. The thermodynamic stabilities and IR spectra of a small-, medium-, and large-sized water cluster are studied in this work. After full optimization of (H2O)20,54,100 using the hybrid functional B3LYP, the electronic energies, zero-point energies, internal energies, enthalpies, entropies, and Gibbs free energies of the water clusters are computed. The OH stretching vibrational IR spectra of (H2O)20,54,100 are also presented and split into sub-spectra for different H-bond types based on the specific contributions from each group. It is found that the OH stretching vibrational frequencies of water are sensitive to the conformations of the H-bonds and the vibrations of the H-bonds belonging to different types are located in separated regions in the IR spectra. Thus, the spectroscopic fingerprints will reflect the H-bond topology of the water molecules in a water cluster.Ice XI has been suggested to be involved in the process of planetary formation as a considerable electric field might be formed from the ferroelectric ice XI in space. IR and Raman spectroscopic technology can be directly used to identify the occurrence of ferroelectric ice XI in laboratory or extraterrestrial settings. Due to the difficulty for DFT to describe non-covalent systems, the performance of 16 different DFT methods applied on the ice Ih, VIII, IX, and XI crystal phases are assessed. Based on the computational accuracy and cost, the IR and Raman spectra of ice Ih and XI are derived and compared. The librational vibrations are found to be the identifier which can be used to distinguish ice Ih and ice XI in the universe. In addition, the existence only one kind of H-bond in ice Ih is demonstrated from the overlapping sub-spectra for different types of H-bonded pair configurations in 16 isomers of ice Ih.The region of water under negative pressure is an exotic land in lack of exploitation. Guest free clathrate hydrate (clathrate ice) of sII type has been recently confirmed experimentally at negative pressure. Does any other clathrate ice phase exist at negative pressure region? Since clathrate hydrate are isostructural with silica clathrate minerals and semiconductor clathrates, and crystal structure prediction by analogy with known structures and first-principles computations is an effective way to find new crystalline phases of solid materials, we are motived to look for new clathrate ice phases from silica or semiconductor clathrate materials based on first-principles computations. Borrowing the idea new clathrate frameworks of ZnO and SiC can be constructed by connecting their bubble clusters in different ways, new clathrate ice phases (sL, sL_I, sL_II, and sL_III) are generated by connecting the water bubble clusters according to different rules. Using the non-local dispersion-corrected vdW-DF2 functional, clathrate ice sL with ultralow density (0.6 g/cm3) is predicted by first-principles phase diagram computations to be stable under larger negative pressures than the sII phase. The phase diagram of water is thus extended into the lower negative pressure region.
|
|
34. |
- Prakash, Om, et al.
(author)
-
How Rigidity and Conjugation of Bidentate Ligands Affect the Geometry and Photophysics of Iron N-Heterocyclic Complexes : A Comparative Study
- 2024
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 63:10, s. 4461-4473
-
Journal article (peer-reviewed)abstract
- Two iron complexes featuring the bidentate, nonconjugated N-heterocyclic carbene (NHC) 1,1′-methylenebis(3-methylimidazol-2-ylidene) (mbmi) ligand, where the two NHC moieties are separated by a methylene bridge, have been synthesized to exploit the combined influence of geometric and electronic effects on the ground- and excited-state properties of homoleptic FeIII-hexa-NHC [Fe(mbmi)3](PF6)3 and heteroleptic FeII-tetra-NHC [Fe(mbmi)2(bpy)](PF6)2 (bpy = 2,2′-bipyridine) complexes. They are compared to the reported FeIII-hexa-NHC [Fe(btz)3](PF6)3 and FeII-tetra-NHC [Fe(btz)2(bpy)](PF6)2 complexes containing the conjugated, bidentate mesoionic NHC ligand 3,3′-dimethyl-1,1′-bis(p-tolyl)-4,4′-bis(1,2,3-triazol-5-ylidene) (btz). The observed geometries of [Fe(mbmi)3](PF6)3 and [Fe(mbmi)2(bpy)](PF6)2 are evaluated through L-Fe-L bond angles and ligand planarity and compared to those of [Fe(btz)3](PF6)3 and [Fe(btz)2(bpy)](PF6)2. The FeII/FeIII redox couples of [Fe(mbmi)3](PF6)3 (−0.38 V) and [Fe(mbmi)2(bpy)](PF6)2 (−0.057 V, both vs Fc+/0) are less reducing than [Fe(btz)3](PF6)3 and [Fe(btz)2(bpy)](PF6)2. The two complexes show intense absorption bands in the visible region: [Fe(mbmi)3](PF6)3 at 502 nm (ligand-to-metal charge transfer, 2LMCT) and [Fe(mbmi)2(bpy)](PF6)2 at 410 and 616 nm (metal-to-ligand charge transfer, 3MLCT). Lifetimes of 57.3 ps (2LMCT) for [Fe(mbmi)3](PF6)3 and 7.6 ps (3MLCT) for [Fe(mbmi)2(bpy)](PF6)2 were probed and are somewhat shorter than those for [Fe(btz)3](PF6)3 and [Fe(btz)2(bpy)](PF6)2. [Fe(mbmi)3](PF6)3 exhibits photoluminescence at 686 nm (2LMCT) in acetonitrile at room temperature with a quantum yield of (1.2 ± 0.1) × 10-4, compared to (3 ± 0.5)
|
|
35. |
- van den Bossche, Maxime, 1989
(author)
-
Methane oxidation over palladium oxide. From electronic structure to catalytic conversion
- 2017
-
Doctoral thesis (other academic/artistic)abstract
- Understanding how catalysts work down to the atomic level can provide ways to improve chemical processes on which our contemporary economy is heavily reliant. The oxidation of methane is one such example, which is important from an environmental point of view. Methane is a potent greenhouse gas and natural and biogas vehicles need efficient catalysts to prevent slip of uncombusted fuel into the exhaust. Commercial catalysts for methane oxidation are often based on palladium or platinum. Metallic palladium, however, is easily converted to palladium oxide when the engine is operated at oxygen rich conditions. In this thesis, various aspects of complete methane oxidation over PdO(101) are investigated with computational methods based on density functional theory (DFT). PdO(101) is the active surface for methane oxidation, and firstly, the reaction intermediates CO and H are studied in detail. Possible pathways for H2 adsorption, dissociation and eventual water formation are investigated, in connection to core-level spectroscopy experiments. Similarly, the adsorption configurations for carbon monoxide on clean and oxidized palladium are examined with a combination of DFT calculations, core-level and infrared spectroscopy. Secondly, a detailed kinetic model is constructed that describes the catalytic conversion of CH4 to CO2 and H2O over PdO(101). This is done in a first-principles microkinetics framework, where the kinetic parameters are obtained by applying density functional and transition state theory. The kinetic model provides a fundamental understanding of findings from reactor experiments, such as the rate limiting steps and poisoning behaviour, and shows qualitatively different behaviour of adsorbates on oxide as compared to metal surfaces. Lastly, limitations of the commonly used class of generalized gradient functionals are illustrated in the computation of several properties of adsorbates on metal oxide surfaces. These include core-level shifts and thermodynamic and reactive properties of adsorbates on the PdO(101) surface. Similarly, the description of several molecular and cooperative adsorption processes are also found to be sensitive to the applied exchange-correlation functional on the BaO(100), TiO2(110) and CeO2(111) surfaces.
|
|
36. |
- Vucetic, Nemanja, et al.
(author)
-
Tuned Bis-Layered Supported Ionic Liquid Catalyst (SILCA) for Competitive Activity in the Heck Reaction of Iodobenzene and Butyl Acrylate
- 2020
-
In: Catalysts. - : MDPI. - 2073-4344. ; 10:9
-
Journal article (peer-reviewed)abstract
- A thorough experimental optimization of supported ionic liquid catalyst (SILCA) was performed in order to obtain a stable and efficient catalyst for the Heck reaction. Out of fifteen proposed structures, propyl imidazolium bromide-tetramethylguanidinium pentanoate modified SiO2 loaded with PdCl2 appeared to be the most stable and to have a good activity in the reaction between butylacrylate and iodobezene, resulting in a complete conversion in 40 min at 100 °C, in four consecutive experiments. This study elucidated on the stability of the catalytic system with an ionic liquid layer during the catalyst synthesis but also under reaction conditions. In the bis-layered catalyst, the imidazolium moiety as a part of internal layer, brought rigidity to the structure, while in external layer pentanoic acid gave sufficiently acidic carboxylic group capable to coordinate 1,1,3,3-tetramethylguanidine (TMG) and thus, allow good dispersion of Pd nanoparticles. The catalyst was characterized by means of XPS, FT-IR, TEM, ICP-OES, ζ-potential, EDX, TGA, and 13C NMR. The release and catch mechanism was observed, whereas Pd re-deposition can be hindered by catalyst poisoning and eventual loss of palladium.
|
|
37. |
- Wiberg, Cedrik, 1989, et al.
(author)
-
Dimerization of 9,10-anthraquinone-2,7-Disulfonic acid (AQDS)
- 2019
-
In: Electrochimica Acta. - : Elsevier BV. - 0013-4686. ; 317, s. 478-485
-
Journal article (peer-reviewed)abstract
- © 2019 Elsevier Ltd The redox flow battery is a leading candidate to supply society with large-scale energy storage. In the category of aqueous organic redox flow batteries, 9,10-anthraquinone-2,7-disulfonic acid (AQDS) is considered a top-performing molecule and shows ideal electrochemical behavior at low concentrations around 1 mM. However, its behavior at higher concentrations was rarely studied. In this work, the correlation between concentration and electrochemical capacity is evaluated for AQDS in 1 M H2SO4 and 1 M alkaline sodium carbonate buffer, employing cyclic voltammetry, rotating disk electrode voltammetry and diffusion NMR. It was found that an electrochemically inactive dimer was formed by the unreduced AQDS molecules, with dimerization equilibrium constants determined to be K = 5 M−1 for the acidic electrolyte and 8 M−1 for the alkaline one, significantly inhibiting full electrochemical utilization of the system. However, upon reduction of the bulk material, the dimerization will shift in favor of monomer or quinhydrone formation, possibly alleviating the impediment to reduction. Finally, it was found that the dimerization could be decreased slightly by increasing the temperature of the system.
|
|
38. |
- Xianchan, Li, 1982, et al.
(author)
-
Electrochemical quantification of transmitter concentration in single nanoscale vesicles isolated from PC12 cells
- 2018
-
In: Faraday Discussions. - : Royal Society of Chemistry (RSC). - 1359-6640 .- 1364-5498. ; 210, s. 353-364
-
Journal article (peer-reviewed)abstract
- We use an electrochemical platform, nanoparticle tracking analysis, and differential centrifugation of single catecholamine vesicles to study the properties of nanometer transmitter vesicles, including the number of molecules, size, and catecholamine concentration inside. Vesicle impact electrochemical cytometry (VIEC) was used to quantify the catecholamine content of single vesicles in different batches isolated from pheochromocytoma (PC12) cells with different ultracentrifugation speeds. We show that, vesicles containing less catecholamine are obtained at subsequent centrifugation steps with higher speed (force). Important to quantification, the cumulative content after subsequent centrifugation steps is equivalent to that of one-step centrifugation at the highest speed, 70,000g. Moreover, as we count molecules in the vesicles, we compared molecular numbers from VIEC, flow VIEC, and intracellular VIEC to corresponding vesicle size measured by nanoparticle tracking analysis to evaluate catecholamine concentration in vesicles. The data suggest that vesicular catecholamine concentration is relatively constant and independent of the vesicular size, indicating vesicular transmitter content as a main factor regulating the vesicle size.
|
|
39. |
- Andersson, Hanna, 1979, et al.
(author)
-
Photochemically Induced Aryl Azide Rearrangement: Solution NMR Spectroscopic Identification of the Rearrangement Product
- 2017
-
In: Journal of Organic Chemistry. - : American Chemical Society (ACS). - 0022-3263 .- 1520-6904. ; 82:3, s. 1812-1816
-
Journal article (peer-reviewed)abstract
- Photolysis of ethyl 3-azido-4,6-difluorobenzoate at room temperature in the presence of oxygen results in the regioselective formation of ethyl 5,7-difluoro-4-azaspiro[2.4]hepta-1,4,6-triene-1-carboxylate, presumably via the corresponding ketenimine intermediate which undergoes a photochemical four-electron electrocyclization followed by a rearrangement. The photorearrangement product was identified by multinuclear solution NMR spectroscopic techniques supported by DFT calculations.
|
|
40. |
- Antonsen, Simen, et al.
(author)
-
Atmospheric Chemistry of tert-butylamine and AMP
- 2017
-
In: Energy Procedia. Volume 114, 2017, Pages 1026-103213th International Conference on Greenhouse Gas Control Technologies, GHGT 2016; Lausanne; Switzerland; 14 November 2016 through 18 November 2016. - : Elsevier BV. - 1876-6102.
-
Conference paper (peer-reviewed)abstract
- © 2017 The Authors. The atmospheric chemistry of (CH 3 ) 3 CNH 2 (tert-butylamine, tBA) and (CH 3 ) 2 (CH 2 OH)CNH 2 (2-amino-2-methyl-1-propanol, AMP) has been studied by quantum chemistry methods and in photo-oxidation experiments in the EUPHORE chamber in Valencia (Spain). Aerosol formation and composition has been quantified. Yields of nitramines and other products in the photo-oxidations have been determined and complete photo-oxidation schemes including branching between the major reaction routes have been obtained. Published by Elsevier Ltd.
|
|
41. |
- Armanious, Antonius, 1981, et al.
(author)
-
Determination of Nanosized Adsorbate Mass in Solution Using Mechanical Resonators: Elimination of the So Far Inseparable Liquid Contribution
- 2021
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 125:41, s. 22733-22746
-
Journal article (peer-reviewed)abstract
- Assumption-free mass quantification of nanofilms, nanoparticles, and (supra)molecular adsorbates in a liquid environment remains a key challenge in many branches of science. Mechanical resonators can uniquely determine the mass of essentially any adsorbate; yet, when operating in a liquid environment, the liquid dynamically coupled to the adsorbate contributes significantly to the measured response, which complicates data interpretation and impairs quantitative adsorbate mass determination. Employing the Navier-Stokes equation for liquid velocity in contact with an oscillating surface, we show that the liquid contribution for rigid systems can be eliminated by measuring the response in solutions with identical kinematic viscosity but different densities. Guided by this insight, we used the quartz crystal microbalance (QCM), one of the most widely employed mechanical resonators, to experimentally demonstrate that the kinematic-viscosity matching can be utilized to quantify the dry mass of rigid and in many cases also nonrigid adsorbate systems, including, e.g., rigid nanoparticles, tethered biological nanoparticles (lipid vesicles), as well as highly hydrated polymeric films. For all the adsorbates, the dry mass determined using the kinematic-viscosity matching was within the uncertainty limits of the corresponding mass determined using complementary methods, i.e., QCM in air, scanning electron microscopy, surface plasmon resonance, and theoretical estimations. The same approach applied to the simultaneously measured energy dissipation made it possible to quantify the mechanical properties of the adsorbate and its attachment to the surface, as demonstrated by, for example, probing the hydrodynamic stabilization induced by nanoparticle crowding. In addition to a unique means to quantify the liquid contribution to the measured response of mechanical resonators, we also envision that the kinematic-viscosity-matching approach will open up applications beyond mass determination, including a new means to investigate orientation, spatial distribution, and binding strength of adsorbates without the need for complementary techniques.
|
|
42. |
- Banerjee, Ambar, 1985-, et al.
(author)
-
Accessing metal-specific orbital interactions in C–H activation with resonant inelastic X-ray scattering
- 2024
-
In: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 15:7, s. 2398-2409
-
Journal article (peer-reviewed)abstract
- Photochemically prepared transition-metal complexes are known to be effective at cleaving the strong C–H bonds of organic molecules in room temperature solutions. There is also ample theoretical evidence that the two-way, metal to ligand (MLCT) and ligand to metal (LMCT), charge-transfer between an incoming alkane C–H group and the transition metal is the decisive interaction in the C–H activation reaction. What is missing, however, are experimental methods to directly probe these interactions in order to reveal what determines reactivity of intermediates and the rate of the reaction. Here, using quantum chemical simulations we predict and propose future time-resolved valence-to-core resonant inelastic X-ray scattering (VtC-RIXS) experiments at the transition metal L-edge as a method to provide a full account of the evolution of metal–alkane interactions during transition-metal mediated C–H activation reactions. For the model system cyclopentadienyl rhodium dicarbonyl (CpRh(CO)2), we demonstrate, by simulating the VtC-RIXS signatures of key intermediates in the C–H activation pathway, how the Rh-centered valence-excited states accessible through VtC-RIXS directly reflect changes in donation and back-donation between the alkane C–H group and the transition metal as the reaction proceeds via those intermediates. We benchmark and validate our quantum chemical simulations against experimental steady-state measurements of CpRh(CO)2 and Rh(acac)(CO)2 (where acac is acetylacetonate). Our study constitutes the first step towards establishing VtC-RIXS as a new experimental observable for probing reactivity of C–H activation reactions. More generally, the study further motivates the use of time-resolved VtC-RIXS to follow the valence electronic structure evolution along photochemical, photoinitiated and photocatalytic reactions with transition metal complexes.
|
|
43. |
- Barker, David, 1993, et al.
(author)
-
Filter function of graphene oxide: Trapping perfluorinated molecules
- 2020
-
In: Journal of Chemical Physics. - : AIP Publishing. - 1089-7690 .- 0021-9606. ; 152:2
-
Journal article (peer-reviewed)abstract
- We need clean drinking water, but current water purification methods are not always sufficient. This study examines the binding and binding mechanisms when graphene oxide is used as a filter material for removing perfluorinated substances and trihalomethanes. We use density functional theory calculations to examine the binding of the harmful molecules on graphene oxide. Our results indicate that the binding energies between graphene oxide and the investigated molecules are in the range of 370-1450 meV per molecule, similar to the binding energies obtained in other studies, where adsorption of similar size molecules onto graphene oxide has been investigated. This indicates that graphene oxide has the potential to separate the molecules of interest from the water. Significant contribution to the binding energies comes from the van der Waals (dispersion) interaction between the molecule and graphene oxide, while the hydrogen bonding between the functional groups of graphene oxide and the hydrogen atoms in functional groups on the molecules also plays a role in the binding.
|
|
44. |
- Brownwood, B., et al.
(author)
-
Gas-Particle Partitioning and SOA Yields of Organonitrate Products from NO3-Initiated Oxidation of Isoprene under Varied Chemical Regimes
- 2021
-
In: Acs Earth and Space Chemistry. - : American Chemical Society (ACS). - 2472-3452. ; 5:4, s. 785-800
-
Journal article (peer-reviewed)abstract
- Alkyl nitrate (AN) and secondary organic aerosol (SOA) from the reaction of nitrate radicals (NO3) with isoprene were observed in the Simulation of Atmospheric PHotochemistry In a large Reaction (SAPHIR) chamber during the NO(3)Isop campaign in August 2018. Based on 15 day-long experiments under various reaction conditions, we conclude that the reaction has a nominally unity molar AN yield (observed range 90 +/- 40%) and an SOA mass yield of OA + organic nitrate aerosol of 13-15% (with similar to 50 mu g m(-3) inorganic seed aerosol and 2-5 mu g m-3 total organic aerosol). Isoprene (5-25 ppb) and oxidant (typically similar to 100 ppb O-3 and 5-25 ppb NO2) concentrations and aerosol composition (inorganic and organic coating) were varied while remaining close to ambient conditions, producing similar AN and SOA yields under all regimes. We observe the formation of dinitrates upon oxidation of the second double bond only once the isoprene precursor is fully consumed. We determine the bulk partitioning coefficient for ANs (K-p similar to 10(-3) m(3) mu g(-1)), indicating an average volatility corresponding to a C-5 hydroxy hydroperoxy nitrate.
|
|
45. |
- Brülls, Steffen, 1991, et al.
(author)
-
Bonding between π-Conjugated Polycations and Monolayer Graphene: Decisive Role of Anions
- 2023
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 127:4, s. 1917-28
-
Journal article (peer-reviewed)abstract
- Functionalization and precise modulation of the electronic properties of graphene are key processes in the development of new applications of this promising material. This study examines the potential of using organic polycations as p-dopants and/or anchoring motifs for non-covalent functionalization. A library of hybrid materials was prepared through wet-chemical non-covalent functionalization. Both chemical vapor deposition graphene and reduced graphene oxide were functionalized with a series of neutral and polycationic benzimidazole-based systems. We report on how both the number of anions and the size, shape, and magnitude of the positive charge of the benzimidazole-based systems cooperatively affect the redox properties as well as the affinity for and the nature of bonding to graphene. The redox properties of the benzimidazole-based systems were studied by cyclic voltammetry. The functionalized graphene materials were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry. Density functional theory calculations were performed to make contact between the experimental results obtained for molecular samples and hybrid materials. No universal dependence of the binding affinity on a single parameter, such as the amount of positive charge or the size of the system, was found. Instead, the cooperative effect of the three-dimensional structure of the benzimidazole-based systems and the number of anions was found to play a pivotal role. Together, these parameters determine the degree of partial electron sharing and magnitude of dispersion forces involved in the binding of members of this family of benzimidazole-based systems to graphene.
|
|
46. |
- Börje, Anna, 1961, et al.
(author)
-
New luminescent and redox-active mono- and polynuclear ruthenium(II) and osmium(II) polypyridine complexes
- 2002
-
In: Journal of the Chemical Society-Dalton Transactions. - 1472-7773. ; :6, s. 843-848
-
Journal article (peer-reviewed)abstract
- A series of mono and polynuclear Ru(II) and Os(II) polypyridine complexes based on the bpy-O-bpy ligand {bpy-O-bpy = bis[4-(2,2'-bipyridinyl)]ether} has been prepared. The redox, absorption and luminescence properties of these species have been measured and compared with those of the [Ru(bpy)(3)](2+) and [Os(bpy)(3)](2+) parent compounds. Electrochemical oxidation involves the metal centers, and occurs reversibly in acetonitrile at room temperature at about +1.30 and +0.85 V vs. SCE, respectively, for the Ru- and Os-based units. Reduction is ligand-centered and features a first irreversible wave followed by several reversible processes. Absorption spectra are essentially the sum of the spectra of the component monometallic species. Luminescence emission is observed both in acetonitrile solution (298 K) and in frozen matrix (77 K), originating from (MLCT)-M-3 states. Homometallic complexes display luminescence properties which are close to that featured by the parent [M(bpy)(3)](2+) species. In heterometallic species luminescence is observed only from the Os-based unit, indicating that efficient energy transfer takes place from the Ru-based to the Os-based moiety. The results indicate that the electronic communication through the bpy-O-bpy bridging ligand is so small that it doesn't substantially modify the properties of the metal units, which are those of the corresponding isolated [M(bpy)(3)](2+) units, but large enough to allow efficient energy transfer through the bridge. The bpy-O-bpy bridging ligand appears thus a promising component for the synthesis of multimetallic antenna systems.
|
|
47. |
- Carlsson, P. T. M., et al.
(author)
-
Comparison of isoprene chemical mechanisms under atmospheric night-time conditions in chamber experiments: evidence of hydroperoxy aldehydes and epoxy products from NO3 oxidation
- 2023
-
In: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 23:5, s. 3147-3180
-
Journal article (peer-reviewed)abstract
- The gas-phase reaction of isoprene with the nitrate radical (NO3) was investigated in experiments in the outdoor SAPHIR chamber under atmospherically relevant conditions specifically with respect to the chemical lifetime and fate of nitrato-organic peroxy radicals (RO2). Observations of organic products were compared to concentrations expected from different chemical mechanisms: (1) the Master Chemical Mechanism, which simplifies the NO3 isoprene chemistry by only considering one RO2 isomer; (2) the chemical mechanism derived from experiments in the Caltech chamber, which considers different RO2 isomers; and (3) the FZJ-NO3 isoprene mechanism derived from quantum chemical calculations, which in addition to the Caltech mechanism includes equilibrium reactions of RO(2 )isomers, unimolecular reactions of nitrate RO(2 )radicals and epoxidation reactions of nitrate alkoxy radicals. Measurements using mass spectrometer instruments give evidence that the new reactions pathways predicted by quantum chemical calculations play a role in the NO3 oxidation of isoprene. Hydroperoxy aldehyde (HPALD) species, which are specific to unimolecular reactions of nitrate RO2, were detected even in the presence of an OH scavenger, excluding the possibility that concurrent oxidation by hydroxyl radicals (OH) is responsible for their formation. In addition, ion signals at masses that can be attributed to epoxy compounds, which are specific to the epoxidation reaction of nitrate alkoxy radicals, were detected. Measurements of methyl vinyl ketone (MVK) and methacrolein (MACR) concentrations confirm that the decomposition of nitrate alkoxy radicals implemented in the Caltech mechanism cannot compete with the ring-closure reactions predicted by quantum chemical calculations. The validity of the FZJ-NO3 isoprene mechanism is further supported by a good agreement between measured and simulated hydroxyl radical (OH) reactivity. Nevertheless, the FZJ-NO3 isoprene mechanism needs further investigations with respect to the absolute importance of unimolecular reactions of nitrate RO2 and epoxidation reactions of nitrate alkoxy radicals. Absolute concentrations of specific organic nitrates such as nitrate hydroperoxides would be required to experimentally determine product yields and branching ratios of reactions but could not be measured in the chamber experiments due to the lack of calibration standards for these compounds. The temporal evolution of mass traces attributed to product species such as nitrate hydroperoxides, nitrate carbonyl and nitrate alcohols as well as hydroperoxy aldehydes observed by the mass spectrometer instruments demonstrates that further oxidation by the nitrate radical and ozone at atmospheric concentrations is small on the timescale of one night (12 h) for typical oxidant concentrations. However, oxidation by hydroxyl radicals present at night and potentially also produced from the decomposition of nitrate alkoxy radicals can contribute to their nocturnal chemical loss.
|
|
48. |
- Damas, Giane Benvinda, et al.
(author)
-
Carbon dioxide reduction mechanism on Ru-based electrocatalysts [Ru(bpy)(2)(CO)(2)](2+) : insights from first-principles theory
- 2021
-
In: Sustainable Energy & Fuels. - : Royal Society of Chemistry. - 2398-4902. ; 5:23, s. 6066-6076
-
Journal article (peer-reviewed)abstract
- Solar fuel production through the so-called artificial photosynthesis has attracted a great deal of attention to the development of a new world energy matrix that is renewable and environmentally friendly. This process is characterized by light absorption with enough photon energy to generate conduction electrons, which drive the carbon dioxide reduction to produce organic fuels. It is also common to couple Ru-complex electrocatalysts to form a more efficient and selective hybrid system for this application. In this work, we have undertaken a thorough investigation of the redox reaction mechanism of Ru-based electrocatalysts by means of density functional theory (DFT) methods under the experimental conditions that have been previously reported. More specifically, we have studied the electrochemistry and catalytic activity of the [Ru(bpy)(2)(CO)(2)](2+) coordination complex. Our theoretical assessment supports the following catalytic cycle: (i) [Ru(bpy)(2)(CO)(2)](2+) is transformed into [Ru(bpy)(2)(CO)](0) upon two-electron reduction and CO release; (ii) [Ru(bpy)(2)(CO)](0) is protonated to form the [Ru(bpy)(2)(CO)H](+) hydride complex; (iii) CO2 is activated by the hydride complex through an electrophilic addition to form the [Ru(bpy)(2)(CO)(OCHO)](+) intermediate; (iv) the resulting formic acid ligand is released in solution; and, finally, (v) the CO ligand is reattached to the complex to recover the initial [Ru(bpy)(2)(CO)(2)](2+) catalyst.
|
|
49. |
|
|
50. |
- Donahue, N. M., et al.
(author)
-
Aging of biogenic secondary organic aerosol via gas-phase OH radical reactions
- 2012
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 109:34, s. 13503-13508
-
Journal article (peer-reviewed)abstract
- The Multiple Chamber Aerosol Chemical Aging Study (MUCHACHAS) tested the hypothesis that hydroxyl radical (OH) aging significantly increases the concentration of first-generation biogenic secondary organic aerosol (SOA). OH is the dominant atmospheric oxidant, and MUCHACHAS employed environmental chambers of very different designs, using multiple OH sources to explore a range of chemical conditions and potential sources of systematic error. We isolated the effect of OH aging, confirming our hypothesis while observing corresponding changes in SOA properties. The mass increases are consistent with an existing gap between global SOA sources and those predicted in models, and can be described by a mechanism suitable for implementation in those models.
|
|