1. |
- Guo, Y., et al.
(author)
-
Reversible Structural Isomerization of Nature's Water Oxidation Catalyst Prior to O-O Bond Formation
- 2022
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:26, s. 11736-11747
-
Journal article (peer-reviewed)abstract
- Photosynthetic water oxidation is catalyzed by a manganese-calcium oxide cluster, which experiences five "S-states" during a light-driven reaction cycle. The unique "distorted chair"-like geometry of the Mn4CaO5(6)cluster shows structural flexibility that has been frequently proposed to involve "open" and "closed"-cubane forms from the S1 to S3states. The isomers are interconvertible in the S1 and S2states, while in the S3state, the open-cubane structure is observed to dominate inThermosynechococcus elongatus (cyanobacteria) samples. In this work, using density functional theory calculations, we go beyond the S3+Yzstate to the S3nYz•→ S4+Yzstep, and report for the first time that the reversible isomerism, which is suppressed in the S3+Yzstate, is fully recovered in the ensuing S3nYz•state due to the proton release from a manganese-bound water ligand. The altered coordination strength of the manganese-ligand facilitates formation of the closed-cubane form, in a dynamic equilibrium with the open-cubane form. This tautomerism immediately preceding dioxygen formation may constitute the rate limiting step for O2formation, and exert a significant influence on the water oxidation mechanism in photosystem II.
|
|
2. |
|
|
3. |
|
|
4. |
- Younesi, Reza, et al.
(author)
-
Li-O-2 Battery Degradation by Lithium Peroxide (Li2O2): A Model Study
- 2013
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 25:1, s. 77-84
-
Journal article (peer-reviewed)abstract
- The chemical stability of the Li-O-2 battery components (cathode and electrolyte) in contact with lithium peroxide (Li2O2) was investigated using X-ray photoelectron spectroscopy (XPS). XPS is a versatile method to detect amorphous as well as crystalline decomposition products of both salts and solvents. Two strategies were employed. First, cathodes including carbon, alpha-MnO2 catalyst, and Kynar binder (PVdF-HFP) were exposed to Li2O2 and LiClO4 in propylene carbonate (PC) or tetraethylene glycol dimethyl ether (TEGDME) electrolytes. The results indicated that Li2O2 degrades TEGDME to carboxylate containing species and that the decomposition products, in turn, degraded the Kynar binder. The alpha-MnO2 catalyst was unaffected. Second, Li2O2 model surfaces were kept in contact with different electrolytes to investigate the chemical stability and also the resulting surface layer on Li2O2. Further, the XPS experiments revealed that the Li salts such as LiPF6, LiBF4, and LiC!
|
|
5. |
- Maurina Morais, Eduardo, 1989, et al.
(author)
-
Solvent-free synthesis of protic ionic liquids. Synthesis, characterization and computational studies of triazolium based ionic liquids
- 2022
-
In: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322. ; 360
-
Journal article (peer-reviewed)abstract
- A series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98–99% m/m) and dry (128–553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is constructed of only glass and chemically resistant polymer (PTFE and PVDF) parts, which avoid other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). This process is described in detail in the paper as well as in a video. The resulting ionic liquids were carefully analyzed by spectroscopic and thermal methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
|
|
6. |
- Sauer, Christopher, 1993
(author)
-
Green Aromatics: Catalytic Valorisation of bio-derived 2,5-dimethylfuran over Zeolites and Zeotypes
- 2022
-
Doctoral thesis (other academic/artistic)abstract
- This thesis discusses the use of biomass as a potentially green feedstock for the chemical industry in the urgent shift away from fossil resources. I elaborate on reasons why we cannot afford to burn virgin biomass for energy production, among them a variety of ecosystem services that forests and other lands provide. In addition, the utilisation of biomass should be focused on products that sequester and lock away carbon for more extended periods, e.g. timber, materials and chemicals. In particular, biomass can be used as an alternative "carbon neutral" feedstock for the chemical industry, where we can preserve the already existing chemical complexity in the bio-based molecules. One example is the upgrading of furans to benzene, toluene and xylene (BTX) aromatics with the help of zeolite catalysis. These aromatics are important commodity chemicals, where the shift to a bio-based resource could make use of already existing knowledge, catalyst and production infrastructure. However, research is necessary to understand these new feedstock molecules and their interaction with the catalysts and to enable the design of applicable catalysts. In order to study the interaction of the furans, in particular 2,5-dimethylfuran (2,5-dmf), I describe and discuss the development of an analytical methodology that utilises infrared spectroscopy and mass spectrometry for the on-line identification and quantification of product molecules during catalytic reactions. This on-line analysis method is then applied to the catalytic conversion of 2,5-dmf to aromatics over a range of zeolite and zeotype catalysts. In-depth studies with ammonia as a probe molecule of the catalytic active acid sites, as well as temperature programmed experiments with ammonia and 2,5-dmf give insights into product distribution, selectivity changes and deactivation of the catalyst. For example, olefins and aromatics are initially preferred products, while with increasing time on stream, the isomerisation of 2,5-dmf becomes dominant. The incorporation of Ga into the zeotype framework, resulting in a Ga-Silicate, shows how targeted catalyst design can increase overall aromatics production. This catalyst is also suitable for selective isomerisation of 2,5-dmf to 2,4-dimethylfuran, which has a rare substitution pattern. Finally, itwas found that the most valuable of BTX, p -xylene, can be produced more selectively when 2,5-dmf is pre-adsorbed onto zeolite ZSM-5 and then released during a temperature programmed product desorption.
|
|
7. |
|
|
8. |
- Lewin, Erik, 1979-
(author)
-
Design of carbide-based nanocomposite coatings
- 2009
-
Doctoral thesis (other academic/artistic)abstract
- In this thesis research on synthesis, microstructure and properties of carbide-based coatings is reported. These coatings are electrically conducting, and can be tailored for high hardness, low friction and wear, along with load-adaptive behaviour. Tailoring these properties is achieved by controlling the relative phase content of the material. Coatings have been synthesised by dc magnetron sputtering, and their structures have been characterised, mainly by X-ray photoelectron spectroscopy and X-ray diffraction.It has been shown that nanocomposites comprising of a nanocrystalline transition metal carbide (nc-MeCx, Me = Ti, Nb or V) and an amorphous carbon (a-C) matrix can result in low contact resistance in electrical contacts. Such materials also exhibit low friction and high resistance to wear, making them especially suitable for application in sliding contacts. The lowest contact resistance is attained for small amounts of the amorphous carbon phase.It has been shown that specific bonding structures are present in the interface between nc-TiCx and the a-C phases in the nanocomposite. It was found in particular that Ti3d and C2p states are involved, and that considerable charge transfer occurs across the interface, thereby influencing the structure of the carbide.Further design possibilities were demonstrated for TiCx-based nanocomposites by alloying them with weakly carbide-forming metals, i.e., Me = Ni, Cu or Pt. Metastable supersaturated solid solution carbides, (T1-xMex)Cy, were identified to result from this alloying process. The destabilisation of the TiCx-phase leads to changes in the phase distribution in the deposited nanocomposites, thus providing further control over the amount of carbon phase formed. Additional design possibilities became available through the decomposition of the metastable (Ti1-xMex)Cy phase through an appropriate choice of annealing conditions, yielding either more carbon phase or a new metallic phase involving Me. This alloying concept was also studied theoretically for all 3d transition metals using DFT techniques.It has also been demonstrated that Ar-ion etching (commonly used in the analysis of carbide based nanocomposites) can seriously influence the result of the analysis, especially for materials containing metastable phases. This implies that more sophisticated methods, or considerable care are needed in making these analyses, and that many of the earlier published results could well be in error.
|
|
9. |
- Lewin, Erik, et al.
(author)
-
Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications
- 2009
-
In: Plasma Processes and Polymers. - : WILEY-VCH Verlag GmbH & Co. - 1612-8850. ; 6:S1, s. S928-S934
-
Journal article (peer-reviewed)abstract
- Nanocomposite nc-TiC/a-C coatings were prepared by non-reactive magnetron sputtering in industrial scale equipment, under varying deposition conditions in order to investigate upscaling and possible industrialisation. The coatings were found to have similar microstructure and performance compared to previous laboratory scale experiments. The samples were characterised with XRD, XPS and SEM as well with ball-on-disc, nanoindentation and electrical measurements. Coatings containing a small fraction of a-C matrix phase were found to have promising both electrical properties (rho < 400 mu Omega cm and contact resistances down to 0.34 m Omega at 40 N) and tribological properties (f < 0.3 for 10 000 laps).
|
|
10. |
- Rahm, Martin, et al.
(author)
-
The Molecular Surface Structure of Ammonium and Potassium Dinitramide : A Vibrational Sum Frequency Spectroscopy and Quantum Chemical Study
- 2011
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:21, s. 10588-10596
-
Journal article (peer-reviewed)abstract
- Vibrational sum frequency spectroscopy (VSFS) and quantum chemical modeling have been employed to investigate the molecular surface structure of ammonium and potassium dinitramide (ADN and KDN) crystals. Identification of key vibrational modes was made possible by performing density functional theory calculations of molecular clusters. The surface of KDN was found to be partly covered with a thin layer of the decomposition product KNO3, which due to its low thickness was not detectable by infrared and Raman spectroscopy. In contrast, ADN exhibited an extremely inhomogeneous surface, on which polarized dinitramide anions were present, possibly together with a thin layer of NH4NO3. The intertwined use of theoretical and experimental tools proved indispensable in the analysis of these complex surfaces. The experimental verification of polarized and destabilized dinitramide anions stresses the importance of designing surface-active polymer support, stabilizers, and/or coating agents, in order to enable environmentally friendly ADN-based solid-rocket propulsion.
|
|
11. |
- Sörensen, Malin H., et al.
(author)
-
Improved enzymatic activity of Thermomyces lanuginosus lipase immobilized in a hydrophobic particulate
- 2010
-
In: Journal of Colloid and Interface Science. - : Elsevier Inc.. - 0021-9797 .- 1095-7103. ; 343:1, s. 359-365
-
Journal article (peer-reviewed)abstract
- Lipase from Thermomyces lanuginosus has been immobilized within particulate mesoporous silica carriers, with either hydrophilic or hydrophobic supporting surfaces, produced by the newly developed emulsion and solvent evaporation (ESE) method. The Michaelis-Menten model was used to calculate the parameters related to the enzymatic activity of lipase i.e. the turnover number, kcat, and the specific activity. The specific activity was improved by immobilization of lipase onto the hydrophobic support, compared to lipase immobilized onto the hydrophilic support and lipase free in solution. The enhanced enzymatic activity of lipase onto a hydrophobic support was attributed to interfacial activation of the Thermomyces lanuginosus lipase when it is attached to a hydrophobic surface and a reduced denaturation. Confocal scanning laser microscopy (CLSM) studies, of fluorescently tagged lipase, showed that leakage of the lipase from the mesoporous particles was limited to an initial period of only a few hours. Both the rate and the amount of lipase leached were reduced when the lipase was immobilized onto the hydrophobic support.
|
|
12. |
- Sznitko, L., et al.
(author)
-
Low-threshold stimulated emission from lysozyme amyloid fibrils doped with a blue laser dye
- 2015
-
In: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 106:2
-
Journal article (peer-reviewed)abstract
- © 2015 AIP Publishing LLC. Amyloid fibrils are excellent self-assembling nanotemplates for organic molecules such as dyes. Here, we demonstrate that laser dye-doped lysozyme type fibrils exhibit significantly reduced threshold for stimulated emission compared to that observed in usual matrices. Laser action was studied in slab planar waveguides of the amyloids doped with Stilbene 420 laser dye prepared using a film casting technique. The lowering of the threshold of stimulated emission is analyzed in the context of intrinsic structure of the amyloid nanotemplates, electrostatic interaction of different microstructures with dye molecules, as well as material properties of the cast layers. All these factors are considered to be of importance for introducing gain for random laser operation.
|
|
13. |
- Laarz, Eric, et al.
(author)
-
Colloidal processing of Al2O3-based composites reinforced with TiN and TiC particulates, whiskers and nanoparticles
- 2001
-
In: Journal of the European Ceramic Society. - 0955-2219 .- 1873-619X. ; 21:8, s. 1027-1035
-
Journal article (peer-reviewed)abstract
- A colloidal processing route has been developed for the preparation of dense and homogeneous Al2O3–TiN/TiC composites. The dispersion and rheological properties of mixtures of TiN or TiC particulates and Al2O3 particles were investigated using electrokinetics and steady-shear rheology. We found that well-dispersed aqueous suspensions with low viscosity could be prepared by adding a poly(acrylic acid) dispersant and controlling pH in the alkaline range. This processing scheme was also suitable for preparation of whisker and nanoparticle composite suspensions. The alumina-based composite suspensions with a secondary-phase concentration of 25 vol.% were freeze-granulated and hot-pressed, and the resulting bodies were fully densified with well-dispersed secondary phases. Homogeneous Al2O3–TiN nanoparticle composites could only be prepared with additions of up to 5 vol.% nanoparticles; higher additions resulted in agglomeration and subsequent grain growth of the nanoparticles.
|
|
14. |
- Rickaby, Rosalind E. M., et al.
(author)
-
Perturbing phytoplankton : response and isotopic fractionation with changing carbonate chemistry in two coccolithophore species
- 2010
-
In: Climate of the Past. - : Copernicus Publications on behalf of the European Geosciences Union. - 1814-9324 .- 1814-9332. ; 6, s. 771-785
-
Journal article (peer-reviewed)abstract
- All species of coccolithophore appear to respond to perturbations of carbonate chemistry in a different way. Here, we show that the degree of malformation, growthrate and stable isotopic composition of organic matter and carbonate produced by two contrasting species of coccolithophore (Gephyrocapsa oceanica and Coccolithus pelagicusssp. braarudii) are indicative of differences between their photosynthetic and calcification response to changing DIC levels (ranging from 1100 to 7800 μmol kg−1) at constant pH (8.13±0.02). Gephyrocapsa oceanica thrived under all conditions of DIC, showing evidence of increased growth rates at higher DIC, but C. braarudii was detrimentally affected at high DIC showing signs of malformation, and decreased growth rates. The carbon isotopic fractionation into organic matter and the coccoliths suggests that C. braarudii utilises a common internal pool of carbon for calcification and photosynthesis but G. oceanica relies on independent supplies for each process. All coccolithophores appear to utilize bicarbonate as their ultimate source of carbon for calcification resulting in the release of a proton. But, we suggest that this proton can be harnessed to enhance the supply of CO2(aq) for photosynthesis either from a large internal HCO−3 pool which acts as a pH buffer (C. braarudii), or pumped externally to aid the diffusive supply of CO2 across the membrane from the abundant HCO−3 (G. oceanica), likely mediated by an internal and external carbonic anhydrase respectively. Our simplified hypothetical spectrum of physiologies may provide a context to understand different species response to changing pH and DIC, the species specific Ep and calcite “vital effects”, as well as accounting for geological trends in coccolithophore cell size.
|
|
15. |
- Brinck, Tore, et al.
(author)
-
Green Energetic Materials, Chapter 2: "Theoretical Design of Green Energetic Materials: Predicting Stability, Detection, Synthesis and Performance"
- 2014
-
In: Green Energetic Materials. - 9781119941293 ; , s. 15-44
-
Book chapter (other academic/artistic)abstract
- Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
|
|
16. |
- Karlsson, Rasmus, 1987-
(author)
-
Theoretical and Experimental Studies of Electrode and Electrolyte Processes in Industrial Electrosynthesis
- 2015
-
Doctoral thesis (other academic/artistic)abstract
- Heterogeneous electrocatalysis is the usage of solid materials to decrease the amount of energy needed to produce chemicals using electricity. It is of core importance for modern life, as it enables production of chemicals, such as chlorine gas and sodium chlorate, needed for e.g. materials and pharmaceuticals production. Furthermore, as the need to make a transition to usage of renewable energy sources is growing, the importance for electrocatalysis used for electrolytic production of clean fuels, such as hydrogen, is rising. In this thesis, work aimed at understanding and improving electrocatalysts used for these purposes is presented.A main part of the work has been focused on the selectivity between chlorine gas, or sodium chlorate formation, and parasitic oxygen evolution. An activation of anode surface Ti cations by nearby Ru cations is suggested as a reason for the high chlorine selectivity of the “dimensionally stable anode” (DSA), the standard anode used in industrial chlorine and sodium chlorate production. Furthermore, theoretical methods have been used to screen for dopants that can be used to improve the activity and selectivity of DSA, and several promising candidates have been found. Moreover, the connection between the rate of chlorate formation and the rate of parasitic oxygen evolution, as well as the possible catalytic effects of electrolyte contaminants on parasitic oxygen evolution in the chlorate process, have been studied experimentally.Additionally, the properties of a Co-doped DSA have been studied, and it is found that the doping makes the electrode more active for hydrogen evolution. Finally, the hydrogen evolution reaction on both RuO2 and the noble-metal-free electrocatalyst material MoS2 has been studied using a combination of experimental and theoretically calculated X-ray photoelectron chemical shifts. In this way, insight into structural changes accompanying hydrogen evolution on these materials is obtained.
|
|
17. |
- Chorell, Erik, et al.
(author)
-
Synthesis and application of a bromomethyl substituted scaffold to be used for efficient optimization of anti-virulence activity
- 2011
-
In: European Journal of Medicinal Chemistry. - : Elsevier Masson SAS. - 0223-5234 .- 1768-3254. ; 46:4, s. 1103-1116
-
Journal article (peer-reviewed)abstract
- Pilicides are a class of compounds that attenuate virulence in Gram negative bacteria by blocking the chaperone/usher pathway in Escherichia coli. It has also been shown that compounds derived from the peptidomimetic scaffold that the pilicides are based on can prevent both Aβ aggregation and curli formation. To facilitate optimizations towards the different targets, a new synthetic platform has been developed that enables fast and simple introduction of various substituents in position C-7 on the peptidomimetic scaffold. Importantly, this strategy also enables introduction of previously unattainable heteroatoms in this position. Pivotal to the synthetic strategy is the synthesis of a C-7 bromomethyl substituted derivative of the ring-fused dihydrothiazolo 2-pyridone pilicide scaffold. From this versatile and reactive intermediate various heteroatom-linked substituents could be introduced on the scaffold including amines, ethers, amides and sulfonamides. In addition, carbon-carbon bonds could be introduced to the sp(3)-hybridized bromomethyl substituted scaffold by Suzuki-Miyaura cross couplings. Evaluation of the 24 C-7 substituted compounds in whole-bacterial assays provided important structure-activity data and resulted in the identification of a number of new pilicides with activity as good or better than those developed previously.
|
|
18. |
- Hollmark, Håkan M., et al.
(author)
-
Resonant Soft X-Ray Emission Spectroscopy and X-Ray Absorption Spectroscopy on the Cathode Material LiNi0.65Co0.25Mn0.1O2
- 2010
-
In: Journal of the Electrochemical Society. - : The Electrochemical Society. - 0013-4651 .- 1945-7111. ; 157:8, s. A962-A966
-
Journal article (peer-reviewed)abstract
- We present a study of the charge-state behavior of the Li-ion battery cathode material LixNi(0.65)Co(0.25)Mn(0.1)O(2) as observed by X-ray absorption spectroscopy (XAS) and resonant soft X-ray emission (RSXE). A set of six identical Li//LixNi0.65Co0.25Mn0.1O2 batteries has been cycled and is studied in different states of charge in the range of x = 1.0, ... ,0.2 before disassembly in an Ar glove box. Site and symmetry selective information about the electronic structure of the conduction and valence bands reveals that Ni as well as Co ions participate in the uptake and release of the extra electron charge that the inserted Li ions provide, but the Ni ion is much less than expected. The net amount of charge on the oxygen varies approximately 0.24 charge units in the range of x, and dramatic changes in the hybridization are evident in XAS and in particular in RSXE at the O K edge. We attribute this to a strong screening behavior of the Li ions between the oxide layers. Structural integrity effects limit the extraction of Li ions to a value of about x = 0.2-0.4. (C) 2010 The Electrochemical Society. [DOI: 10.1149/1.3454739] All rights reserved.
|
|
19. |
- Abrahamsson, Maria, et al.
(author)
-
Steric influence on the excited-state lifetimes of ruthenium complexes with bipyridyl-alkanylene-pyridyl ligands.
- 2008
-
In: Inorganic Chemistry. - : ACS. - 0020-1669 .- 1520-510X. ; 47:9, s. 3540-3548
-
Journal article (peer-reviewed)abstract
- The structural effect on the metal-to-ligand charge transfer (MLCT) excited-state lifetime has been investigated in bis-tridentate Ru(II)-polypyridyl complexes based on the terpyridine-like ligands [6-(2,2'-bipyridyl)](2-pyridyl)methane (1) and 2-[6-(2,2'-bipyridyl)]-2-(2-pyridyl)propane (2). A homoleptic ([Ru(2)(2)](2+)) and a heteroleptic complex ([Ru(ttpy)(2)](2+)) based on the new ligand 2 have been prepared and their photophysical and structural properties studied experimentally and theoretically and compared to the results for the previously reported [Ru(1)(2)](2+). The excited-state lifetime of the homoleptic Ru-II complex with the isopropylene-bridged ligand 2 was found to be 50 times shorter than that of the corresponding homoleptic Ru-II complex of ligand 1, containing a methylene bridge. A comparison of the ground-state geometries of the two homoleptic complexes shows that steric interactions involving the isopropylene bridges make the coordination to the central Ru-II ion less octahedral in [Ru(2)(2)](2+) than in [Ru(1)(2))(2+). Calculations indicate that the structural differences in these complexes influence their ligand field splittings as well as the relative stabilities of the triplet metal-to-ligand charge transfer ((MLCT)-M-3) and metal-centered ((MC)-M-3) excited states. The large difference in measured excited-state lifetimes for the two homoleptic Ru-II complexes is attributed to a strong influence of steric interactions on the ligand field strength, which in turn affects the activation barriers for thermal conversion from (MLCT)-M-3 states to short-lived (MC)-M-3 states.
|
|
20. |
- Wang, Xuan, et al.
(author)
-
Effects of Anthropogenic Chlorine on PM2.5 and Ozone Air Quality in China
- 2020
-
In: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 54:16, s. 9908-9916
-
Journal article (peer-reviewed)abstract
- China has large anthropogenic chlorine emissions from agricultural fires, residential biofuel, waste incineration, coal combustion, and industrial processes. Here we quantify the effects of chlorine on fine particulate matter (PM2.5) and ozone air quality across China by using the GEOS-Chem chemical transport model with comprehensive anthropogenic emissions and detailed representation of gas-phase and heterogeneous chlorine chemistry. Comparison of the model to observed ClNO2, HCl, and particulate Cl- concentrations shows that reactive chlorine in China is mainly anthropogenic, unlike in other continental regions where it is mostly of marine origin. The model is successful in reproducing observed concentrations and their distributions, lending confidence in the anthropogenic chlorine emission estimates and the resulting chemistry. We find that anthropogenic chlorine emissions increase total inorganic PM2.5 by as much as 3.2 μg m-3 on an annual mean basis through the formation of ammonium chloride, partly compensated by a decrease of nitrate because ClNO2 formation competes with N2O5 hydrolysis. Annual mean MDA8 surface ozone increases by up to 1.9 ppb, mainly from ClNO2 chemistry, while reactivities of volatile organic compounds increase (by up to 48% for ethane). We find that a sufficient representation of chlorine chemistry in air quality models can be obtained from consideration of HCl/Cl- thermodynamics and ClNO2 chemistry, because other more complicated aspects of chlorine chemistry have a relatively minor effect.
|
|
21. |
- Kamlar, Martin, 1981, et al.
(author)
-
Synthesis of cis-Oriented Vicinal Diphenylethylenes through a Lewis Acid-Promoted Annulation of Oxotriphenylhexanoates
- 2021
-
In: Journal of Organic Chemistry. - : American Chemical Society (ACS). - 0022-3263 .- 1520-6904. ; 86:13, s. 8660-8671
-
Journal article (peer-reviewed)abstract
- This study explores the synthesis of cyclic cis-vicinal phenyl ethylenes from oxotriphenylhexanoates. The reaction is a BBr3-promoted cyclization of 1,6-ketoesters (1) to five-membered diketo compounds (2). The synthesis is interesting as it constitutes one of the few examples of modular stereoselective synthesis of structures with a cis-oriented vicinal diphenylethylene. The core structure of 2 can be smoothly derivatized, which makes it a promising synthetic building block for further stereoselective synthetic applications.
|
|
22. |
- Arvidsson, Adam, 1990
(author)
-
Partial methane oxidation from electronic structure calculations
- 2017
-
Licentiate thesis (other academic/artistic)abstract
- Investigating catalytic reactions with computational methods is a powerful approach to understand fundamental aspects of catalytic reactions and find ways to guide catalytic design. Partial methane oxidation is one example of a reaction with intriguing challenges, where a detailed atomistic approach may help to unravel the bottlenecks of this, as of yet, inefficient reaction. Although methane only needs one oxygen atom for conversion to methanol, the direct oxidation is difficult; it is in fact so difficult that at many oil extraction sites, the methane that inevitably accompanies the crude oil is flared into carbon dioxide and water as gas-phase methane is too inconvenient to store and transport.The main challenge with partial oxidation of methane is to selectively control the oxidation and steer it towards methanol and prevent over-oxidation to CO2. There exist natural enzymes that can partially oxidize methane to methanol at ambient pressure and temperature, although very slowly. One inorganic analogue to these naturally occurring enzymes are zeolites, a porous material that can readily be synthesized and that have been shown to convert methane to methanol at ambient conditions with a high selectivity (>90 %). This has been realized for zeolites ion-exchanged with different metals, such as iron, cobalt, nickel, and copper. Although there have been many attempts to determine the active site for the reaction, there is still no consensus. One candidate that has been put forth is a [Cu-O-Cu]2+ motif experimentally characterized in the ZSM-5 zeolite. In this thesis, partial oxidation of methane is investigated, focusing on this dimer motif. By combining density functional theory calculations with microkinetic modelling, the catalytic performance of the dimer motif is investigated with a simple reaction mechanism for copper, but also with the copper atoms exchanged with nickel, cobalt, iron, silver, or gold. From these results, it is clear that this particular dimer site is a relevant candidate only for copper, and can be excluded in the continued search for active sites in nickel, cobalt, and iron ion-exchanged ZSM-5.To further understand how methanol is formed and interacts with Cu-ZSM-5, experimental and calculated infrared frequencies are compared for methanol and other adsorbates. The partial oxidation of methane is also studied for other systems with oxidants other than oxygen. In particular, methane oxidation with H2S to CH3SH and H2 is explored on molybdenum sulfide clusters.
|
|
23. |
- Shwan, Soran, 1984
(author)
-
Metal-exchanged zeolites for NH3-SCR applications - Activity and Deactivation studies
- 2014
-
Doctoral thesis (other academic/artistic)abstract
- Emissions of nitrogen oxides (NOX) formed during the burning process in internal combustion engines is a major contributor to global air pollutions. One effective way to reduce NOX in lean environments, i.e. oxygen excess is selective catalytic reduction with ammonia (NH3-SCR). Metal-exchanged zeolites have proven to be active as SCR catalysts, where copper and iron are the most common metals. When using metal-exchanged zeolites in exhaust aftertreatment systems, several challenges arise. Resistance towards hydrothermal deactivation and chemisorption of impurities on the active sites of the catalyst are two of the more important challenges. Temperatures between 600-700oC can be seen during regeneration of the particulate filter, which usually is placed upstream close to the SCR catalyst in the exhaust aftertreatment system, and therefore hydrothermal stability of the metal-exchanged zeolite is crucial. Furthermore, high tolerance against catalyst poisons which originate from (bio-) fuels and lubricating oils is desired, where phosphorous and potassium are among the more important poisons. In this thesis thermal and chemical deactivation of iron-exchanged zeolite BEA as SCR catalyst is experimentally studied with special focus paid on the active iron species. Based on the experimental results a kinetic model is developed to predict the decreased activity of the catalyst after deactivation. Several characterization techniques are used to evaluate and correlate structural changes in the catalyst with the decreased activity. Catalysts are prepared and characterized using BET, XPS, XRD, TPD, in-situ FTIR and UV-Vis. The catalytic performance of the samples is measured using a flow-reactor system.It is concluded that the hydrothermal deactivation of Fe-BEA is a result of migration of isolated iron species forming iron cluster inside the zeolite pores and iron particles located on the external surface of the zeolite crystals. Further, it is shown that the growth of iron clusters and particles can be partially reversed by high temperature hydrogen treatment. The chemical deactivation due to phosphorous exposure is the result of formation of metaphosphates replacing hydroxyl groups on the active isolated iron species. Furthermore, the chemical deactivation of Fe-BEA by potassium is concluded to be due to exchange and loss of active isolated iron species in the zeolite forming smaller iron clusters inside the zeolite pores.A kinetic model where different iron species are included was developed based on the hydrothermal deactivation experiments and validated using phosphorous and potassium exposed samples. By fitting and fix the kinetic parameters towards a fresh sample, the decreased SCR activity can be predicted by just decreasing the number of active iron sites, representing loss of active iron species due to hydrothermal treatment and poisoning.The effect of gas atmosphere during solid-state ion-exchange of copper-zeolites was studied as well. It is concluded that copper becomes highly mobile due to formation of copper-ammine complexes in presence of NH3 after reduction of CuII to CuI by adding NO in the exposing gas during the solid-state ion-exchange. Copper-exchanged zeolites could be prepared by exposing physical mixtures of copper-oxides with zeolites to NO and NH3 at as low temperature as 250oC.Finally, the ammonia formation during the rich period of NOX storage and reduction (NSR) cycles was studied using kinetic modeling for the possibility of combining NSR and SCR catalysts in the exhaust aftertreatment system. It is concluded that the formation of ammonia is due to stored NOX and hydrogen from the gas in the first half of the catalyst. However, it was further concluded that the formation of ammonia is delayed due to formation of N2O from stored NOX and formed NH3.
|
|
24. |
- Hassellöv, Martin, 1970, et al.
(author)
-
REACH missar nano!
- 2009
-
In: Miljöforskning. ; 2009:3-4
-
Journal article (other academic/artistic)
|
|
25. |
- Carmona, Pierre, 1995, et al.
(author)
-
Structure formation and coarsening kinetics of phase-separated spin-coated ethylcellulose/hydroxypropylcellulose films
- 2022
-
In: Soft Matter. - : Royal Society of Chemistry. - 1744-683X .- 1744-6848. ; 18:16, s. 3206-3217
-
Journal article (peer-reviewed)abstract
- Porous phase-separated ethylcellulose/hydroxypropylcellulose (EC/HPC) films are used to control drug transport from pharmaceutical pellets. The drug transport rate is determined by the structure of the porous films that are formed as water-soluble HPC leaches out. However, a detailed understanding of the evolution of the phase-separated structure in the films is lacking. In this work, we have investigated EC/HPC films produced by spin-coating, mimicking the industrial fluidized bed spraying. The aim was to investigate film structure evolution and coarsening kinetics during solvent evaporation. The structure evolution was characterized using confocal laser scanning microscopy and image analysis. The effect of the EC:HPC ratio (15 to 85 wt% HPC) on the structure evolution was determined. Bicontinuous structures were found for 30 to 40 wt% HPC. The growth of the characteristic length scale followed a power law, L(t) ∼ t(n), with n ∼ 1 for bicontinuous structures, and n ∼ 0.45-0.75 for discontinuous structures. The characteristic length scale after kinetic trapping ranged between 3.0 and 6.0 μm for bicontinuous and between 0.6 and 1.6 μm for discontinuous structures. Two main coarsening mechanisms could be identified: interfacial tension-driven hydrodynamic growth for bicontinuous structures and diffusion-driven coalescence for discontinuous structures. The 2D in-plane interface curvature analysis showed that the mean curvature decreased as a function of time for bicontinuous structures, confirming that interfacial tension is driving the growth. The findings of this work provide a good understanding of the mechanisms responsible for morphology development and open for further tailoring of thin EC/HPC film structures for controlled drug release. © 2022 The Royal Society of Chemistry
|
|
26. |
|
|
27. |
- Co, Michelle, 1975-, et al.
(author)
-
Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure
- 2012
-
In: Analytica Chimica Acta. - : Elsevier BV. - 0003-2670 .- 1873-4324. ; 716, s. 40-48
-
Journal article (peer-reviewed)abstract
- Experiments with birch bark samples have been carried to enable a distinction between extraction and degradation effects during pressurised hot water extraction. Two samples, E80 and El 80, contained birch bark extracts obtained after extraction at 80 and 180 degrees C for up to 45 min, respectively. Two other samples, P80 and P180, were only extracted for 5 min at the two temperatures and were thereafter filtered and hydrothermally treated at 80 and 180 degrees C, respectively. During the latter treatment, samples were collected at different times to assess the stability of the extracted compounds. An offline DPPH (2,2-diphenyl-1-picrylhydrazyl) assay, as well as a high performance liquid chromatographic separation coupled to an electrochemical detector, were used to determine the antioxidant capacity of the processed samples. The results obtained with the different techniques were compared to assess the yield of the extraction and degradation processes. In addition, an online hyphenated system comprising high performance liquid chromatography coupled to diode-array; electrochemical; and tandem mass spectrometric detection (HPLC-DAD-ECD-MS/MS) was used to study the compositions of the extracts in more detail. The results for the samples processed at 80 degrees C showed that the extraction reached a steady-state already after 5 min, and that the extracted compounds were stable throughout the entire extraction process. Processing at 180 degrees C, on the other hand, gave rise to partly degraded extracts with a multitude of peaks in both the diode array and electrochemical detectors, and a higher antioxidant capacity compared to for the extracts obtained at 80 degrees C. It is concluded that HPLC-DAD-ECD is a more appropriate technique for the determination of antioxidants than the DPPH assay. The mass spectrometric results indicate that one of the extracted antioxidants, catechin, was isomerised to its diastereoisomers; (+)-catechin, (-)-catechin, (+)-epicatechin, and (-)-epicatechin.
|
|
28. |
- Howe, Andrew, 1995-
(author)
-
Immobilisation of Ru-Based Molecular Catalysts for Electrochemical Water Oxidation
- 2022
-
Doctoral thesis (other academic/artistic)abstract
- Artificial photosynthesis requires catalysts for efficient and selective conversions of small molecules. Molecular catalysts are advantageous to use in these instances as they offer precise control over chemical reactivity. They are synthetically tuneable, and their catalytic mechanisms are often well documented and more readily understood than those of solid-state catalysts. In this thesis, the synthetic incorporation of molecular catalysts into heterogenised molecular anodes for water oxidation are evaluated. The catalysts are incorporated as structural linkers into porous metal-organic framework (MOF) structures, and as coordination oligomers stacked onto graphitic surfaces. The preparation of MOF/molecular catalyst hybrid materials of two topologies, UiO (UiO = Universitet i Oslo) and NU-1000 (NU = Northwestern University), were investigated. Multiple synthetic methods for the incorporation of molecular ruthenium-based catalysts into MOFs were examined in papers I and II. In paper III of this thesis, a Ru-bda type molecular complex was successfully used in the solvothermal synthesis of a new MOF. The resulting material is the first of its kind that is built exclusively from molecular water oxidation catalyst linkers. It is shown that MOF incorporation greatly enhances the structural stability of the catalyst linker in chemical water oxidation experiments, giving rise to higher turnover numbers compared to that of a homogenous reference system. Finally, paper IV describes a stable and inert molecular ruthenium complex, which possesses a flexible adaptative multidentate equatorial (FAME) type equatorial ligand with a carbanion on the equatorial ligand that forms a C-Ru bond. This molecular complex is studied in homogeneous phase, and subsequently incorporated into a coordination oligomer, which can be activated for water oxidation catalysis. This finding broadens the field of molecular catalysis significantly, and proves that supramolecular interactions can be used to promote electrocatalysis in complexes which are otherwise too inert and stable to engage in electrocatalytic reactions.
|
|
29. |
- Marinado, Tannia, et al.
(author)
-
Rhodanine dyes for dye-sensitized solar cells : spectroscopy, energy levels and photovoltaic performance
- 2009
-
In: Physical Chemistry, Chemical Physics - PCCP. - Cambridge : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 11:1, s. 133-141
-
Journal article (peer-reviewed)abstract
- Three new sensitizers for photoelectrochemical solar cells were synthesized consisting of a triphenylamine donor, a rhodanine-3-acetic acid acceptor and a polyene connection. The conjugation length was systematically increased, which resulted in two effects: first, it led to a red-shift of the optical absorption of the dyes, resulting in an improved spectral overlap with the solar spectrum.Secondly, the oxidation potential decreased systematically. The excited state levels were, however, calculated to be nearly stationary. The experimental trends were in excellent agreement with density functional theory (DFT) computations. The photovoltaic performance of this set of dyes as sensitizers in mesoporous TiOredox couple. The dye with the best absorption characteristics showed the poorest solar cell efficiency, due to losses by recombination of electrons in TiOthe electrolyte led to a strongly reduced photocurrent for all dyes due to a reduced electron injection efficiency, caused by a 0.15 V negative shift of the TiO 2 solar cells was investigated using electrolytes containing the iodide/triiodide2 with triiodide. Addition of 4-tert butylpyridine to2 conduction band potential.
|
|
30. |
- Morandeira, Ana, et al.
(author)
-
Improved photon-to-current conversion efficiency with a nanoporous p-type NiO electrode by the use of a sensitizer-acceptor dyad
- 2008
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 112:5, s. 1721-1728
-
Journal article (peer-reviewed)abstract
- A peryleneimide sensitizer and a covalently linked peryleneimide-naphthalenediimide dyad were prepared and characterized by absorption and emission spectroscopies, electrochemistry, and spectroelectrochemistry. These compounds were chemisorbed on nanoporous nickel oxide electrodes and then studied by femtosecond transient absorption spectroscopy in the presence of a redox active electrolyte (I-3(-)/I-). In both compounds, upon excitation of the peryleneimide unit, an electron is efficiently ejected from the valence band of NiO to the dye with an average time constant of approximately 0.5 ps. In the case of the dyad, the excess electron is shifted further onto the naphtalenediimide unit, creating a new charge separated state. The latter exhibits a substantial retardation of the charge recombination between the hole and the reduced molecule compared with the peryleneimide sensitizer. The photoaction spectra of a sandwich dye-sensitized solar cell (DSSC) composed of NiO films and these new dyes were recorded, and the absorbed-photon to current conversion efficiency (APCE) was three times higher with the dyad than with the peryleneimide dye: 45%. The maximum APCE of approximately 45% is the highest value reported for a DSSC based on a nanostructured metal oxide p-type semiconductor.
|
|
31. |
- Moth-Poulsen, Kasper, 1978
(author)
-
Molecular Systems for Solar Thermal Energy Storage and Conversion
- 2013
-
In: Organic Synthesis and Molecular Engineering. - Hoboken, NJ, USA : John Wiley & Sons, Inc.. ; , s. 179-196
-
Book chapter (other academic/artistic)abstract
- Using a synthetic approach to organic materials chemistry, this book sets forth tested and proven methods and practices that make it possible to engineer organic molecules offering special properties and functions. Throughout the book, plenty of real-world examples demonstrate the countless possibilities of creating one-of-a-kind molecules and supramolecular systems to support a broad range of applications. The book explores applications in both materials and bioorganic chemistry, including molecular electronics, energy storage, sensors, nanomedicine, and enzyme engineering.Organic Synthesis and Molecular Engineering consists of fourteen chapters, each one contributed by one or more leading international experts in the field. The contributions are based on a thorough review and analysis of the current literature as well as the authors' firsthand experience in the lab engineering new organic molecules. Designed as a practical lab reference, the book offers:Tested and proven synthetic approaches to organic materials chemistryMethods and practices to successfully engineer functionality into organic moleculesExplanations of the principles and concepts underlying self-assembly and supramolecular chemistryGuidance in selecting appropriate structural units used in the design and synthesis of functional molecules and materialsCoverage of the full range of applications in materials and bioorganic chemistryA full chapter on graphene, a new topic generating intense researchOrganic Synthesis and Molecular Engineering begins with core concepts, molecular building blocks, and synthetic tools. Next, it explores molecular electronics, supramolecular chemistry and self-assembly, graphene, and photoresponsive materials engineering. In short, it offers everything researchers need to fully grasp the underlying theory and then build new molecules and supramolecular systems.
|
|
32. |
- Ottosson, Niklas, et al.
(author)
-
On the Origins of Core-Electron Chemical Shifts of Small Biomolecules in Aqueous Solution : Insights from Photoemisson and ab Initio Calculations of Glycine(aq)
- 2011
-
In: Journal of the American Chemical Society. - : American Chemical Society. - 0002-7863 .- 1520-5126. ; 133:9, s. 3120-3130
-
Journal article (peer-reviewed)abstract
- The local electronic structure of glycine in neutral, basic, and acidic aqueous solution is studied experimentally by X-ray photoelectron spectroscopy and theoretically by molecular dynamics simulations accompanied by first-principle electronic structure and spectrum calculations. Measured and computed nitrogen and carbon is binding energies are assigned to different local atomic environments, which are shown to be sensitive to the protonation/deprotonation of the amino and carboxyl functional groups at different pH values. We report the first accurate computation of core-level chemical shifts of an aqueous solute in various protonation states and explicitly show how the distributions of photoelectron binding energies (core-level peak widths) are related to the details of the hydrogen bond configurations, i.e. the geometries of the water solvation shell and the associated electronic screening. The comparison between the experiments and calculations further enables the separation of protonation-induced (covalent) and solvent-induced (electrostatic) screening contributions to the chemical shifts in the aqueous phase. The present core-level line shape analysis facilitates an accurate interpretation of photoelectron spectra from larger biomolecular solutes than glycine.
|
|
33. |
- Sahlberg, Martin, 1981-
(author)
-
Light-Metal Hydrides for Hydrogen Storage
- 2009
-
Doctoral thesis (other academic/artistic)abstract
- Demands for zero greenhouse-gas emission vehicles have sharpened with today’s increased focus on global warming. Hydrogen storage is a key technology for the implementation of hydrogen powered vehicles. Metal hydrides can claim higher energy densities than alternative hydrogen storage materials, but a remaining challenge is to find a metal hydride which satisfies all current demands on practical usability. Several metals store large amounts of hydrogen by forming a metal hydride, e.g., Mg, Ti and Al. The main problems are the weight of the material and the reaction energy between the metal and hydrogen. Magnesium has a high storage capacity (7.6 wt.% hydrogen) in forming MgH2; this is a slow reaction, but can be accelerated either by minimizing the diffusion length within the hydride or by changing the diffusion properties. Light-metal hydrides have been studied in this thesis with the goal of finding new hydrogen storage compounds and of gaining a better understanding of the parameters which determine their storage properties. Various magnesium-containing compounds have been investigated. These systems represent different ways to address the problems which arise in exploiting magnesium based materials. The compounds were synthesized in sealed tantalum tubes, and investigated by in situ synchrotron radiation X-ray powder diffraction, neutron powder diffraction, isothermal measurements, thermal desorption spectroscopy and electron microscopy. It is demonstrated that hydrogen storage properties can be improved by alloying magnesium with yttrium or scandium. Mg-Y-compounds decompose in hydrogen to form MgH2 nano-structures. Hydrogen desorption kinetics are improved compared to pure MgH2. The influence of adding a third element, gallium or zinc has also been studied; it is shown that gallium improves hydrogen desorption from YH2. ScAl1-xMgx is presented here for the first time as a hydrogen storage material. It absorbs hydrogen by forming ScH2 and Al(Mg) in a fully reversible reaction. It is shown that the hydrogen desorption temperature of ScH2 is reduced by more than 400 °C by alloying with aluminium and magnesium.
|
|
34. |
- Schäfer, Clara, 1992, et al.
(author)
-
Room Temperature Dye Glasses: A Guideline Toward the Fabrication of Amorphous Dye Films with Monomeric Absorption and Emission
- 2022
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 34:20, s. 9294-9302
-
Journal article (peer-reviewed)abstract
- The morphology of films containing photoactive materials is crucial for the performance of solid-state dye applications. Organic dyes tend to crystallize due to their usually planar molecular structure and the resulting intermolecular interactions. This leads to inhomogeneous films with crystalline, aggregated, and amorphous regions, decreasing device efficiency and complicating spectral analysis. Improving the glass-forming ability of organic dyes therefore presents a major challenge for solid-state dye applications. Here, we present a guideline to create organic dye glasses using BODIPY as a model dye. The method is based on the strategic design of BODIPY derivatives, equipped with short alkyl chains, in combination with blending of two or more derivatives. Mixing increases the entropy of the liquid state and lowers the thermodynamic driving force for crystallization as well as the kinetic fragility of the system. This enables the fabrication of homogeneous thin films without any additives. In these films, the dye molecules are trapped in a glassy state, featuring monomeric absorption and emission. This strategy leads to a BODIPY material with an amorphous character in thin films, dropcast films, and bulk. Further, the strategy is based on thermodynamics and is therefore expected to be general, enabling the transformation of any dye molecule into a glass former.
|
|
35. |
- Singh, Pradyumna S., et al.
(author)
-
(I,0) Mixed-Valence State of a Diiron Complex with Pertinence to the [FeFe]-Hydrogenase Active Site : An IR, EPR, and Computational Study
- 2009
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 48:23, s. 10883-10885
-
Journal article (peer-reviewed)abstract
- Biphenyl-2,2'-dithiolate (bpdt) bridged Fe-2(bpdt)(CO)(6) (1) undergoes two sequential electrochemically quasi-reversible reductions. The one-electron reduction product 1(-) is unusually stable against irreversible structural changes and could be characterized by IR and EPR spectroscopy supported by computational methods. Reduction to the (I,0) state does not trigger bridging coordination of CO but partial deligation of the dithiolate in 1(-) that ultimately forms a diamagnetic dimerization product.
|
|
36. |
- Singh, Shivangi, 1996
(author)
-
Investigating hydrothermal stability and influence of water on the activity of Cu-CHA catalysts for NH3-SCR
- 2024
-
Licentiate thesis (other academic/artistic)abstract
- Selective catalytic reduction of nitrogen oxides (NOx) with NH3 as a reducing agent (NH3- SCR) is a leading technology for diesel exhaust emission control. Cu-exchanged zeolites with the chabazite structure (Cu-CHA) have emerged as the preferred catalysts thanks to its high activity and hydrothermal stability. Hydrothermal stability is related to dealumination, i.e. removal of aluminum from the zeolite framework to form extraframework aluminum, at high temperatures in the presence of water vapor. Copperexchanged chabazite (Cu-CHA) zeolites have higher hydrothermal stability compared to H-chabazite (H-CHA). To understand the delayed dealumination of Cu-CHA catalysts, we have investigated the reaction paths for dealumination in H-CHA and Cu-CHA using density functional theory (DFT) calculations combined with microkinetic modeling. We find that Cu-CHA and H-CHA follow similar four-step hydrolysis processes, yet the dealumination of Cu-CHA has higher energy barriers, suggesting stabilization of the CHA structure by Cu ions. Furthermore, the preferred reaction product upon complete dealumination of Cu-CHA is a copper-aluminate like species bound to the zeolite framework. The microkinetic analysis quantifies the increased stability of Cu-CHA as compared to H-CHA. In addition to the high-temperature dealumination, we investigated the role of water on low-temperature SCR by experimentally measuring the activity and reaction order of water. The reaction order of water is found to be increasingly negative with increasing water pressure. DFT calculations reveal that water blocks the active Cu-sites and a DFT-based microkinetic model reproduces the measured change of reaction order with water pressure.
|
|
37. |
- van den Bossche, Maxime, 1989
(author)
-
Methane oxidation over palladium oxide. From electronic structure to catalytic conversion
- 2017
-
Doctoral thesis (other academic/artistic)abstract
- Understanding how catalysts work down to the atomic level can provide ways to improve chemical processes on which our contemporary economy is heavily reliant. The oxidation of methane is one such example, which is important from an environmental point of view. Methane is a potent greenhouse gas and natural and biogas vehicles need efficient catalysts to prevent slip of uncombusted fuel into the exhaust. Commercial catalysts for methane oxidation are often based on palladium or platinum. Metallic palladium, however, is easily converted to palladium oxide when the engine is operated at oxygen rich conditions. In this thesis, various aspects of complete methane oxidation over PdO(101) are investigated with computational methods based on density functional theory (DFT). PdO(101) is the active surface for methane oxidation, and firstly, the reaction intermediates CO and H are studied in detail. Possible pathways for H2 adsorption, dissociation and eventual water formation are investigated, in connection to core-level spectroscopy experiments. Similarly, the adsorption configurations for carbon monoxide on clean and oxidized palladium are examined with a combination of DFT calculations, core-level and infrared spectroscopy. Secondly, a detailed kinetic model is constructed that describes the catalytic conversion of CH4 to CO2 and H2O over PdO(101). This is done in a first-principles microkinetics framework, where the kinetic parameters are obtained by applying density functional and transition state theory. The kinetic model provides a fundamental understanding of findings from reactor experiments, such as the rate limiting steps and poisoning behaviour, and shows qualitatively different behaviour of adsorbates on oxide as compared to metal surfaces. Lastly, limitations of the commonly used class of generalized gradient functionals are illustrated in the computation of several properties of adsorbates on metal oxide surfaces. These include core-level shifts and thermodynamic and reactive properties of adsorbates on the PdO(101) surface. Similarly, the description of several molecular and cooperative adsorption processes are also found to be sensitive to the applied exchange-correlation functional on the BaO(100), TiO2(110) and CeO2(111) surfaces.
|
|
38. |
- Vucetic, Nemanja, et al.
(author)
-
Tuned Bis-Layered Supported Ionic Liquid Catalyst (SILCA) for Competitive Activity in the Heck Reaction of Iodobenzene and Butyl Acrylate
- 2020
-
In: Catalysts. - : MDPI. - 2073-4344. ; 10:9
-
Journal article (peer-reviewed)abstract
- A thorough experimental optimization of supported ionic liquid catalyst (SILCA) was performed in order to obtain a stable and efficient catalyst for the Heck reaction. Out of fifteen proposed structures, propyl imidazolium bromide-tetramethylguanidinium pentanoate modified SiO2 loaded with PdCl2 appeared to be the most stable and to have a good activity in the reaction between butylacrylate and iodobezene, resulting in a complete conversion in 40 min at 100 °C, in four consecutive experiments. This study elucidated on the stability of the catalytic system with an ionic liquid layer during the catalyst synthesis but also under reaction conditions. In the bis-layered catalyst, the imidazolium moiety as a part of internal layer, brought rigidity to the structure, while in external layer pentanoic acid gave sufficiently acidic carboxylic group capable to coordinate 1,1,3,3-tetramethylguanidine (TMG) and thus, allow good dispersion of Pd nanoparticles. The catalyst was characterized by means of XPS, FT-IR, TEM, ICP-OES, ζ-potential, EDX, TGA, and 13C NMR. The release and catch mechanism was observed, whereas Pd re-deposition can be hindered by catalyst poisoning and eventual loss of palladium.
|
|
39. |
- Zettersten, Camilla, 1978-, et al.
(author)
-
Identification and Characterization of Polyphenolic Antioxidants Using On-Line Liquid Chromatography, Electrochemistry, and Electrospray Ionization Tandem Mass Spectrometry
- 2009
-
In: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 81:21, s. 8968-8977
-
Journal article (peer-reviewed)abstract
- It is demonstrated that electrochemistry (EC) coupled to liquid chromatography (LC) and electrospray ionization tandem mass spectrometry (LC/EC/ESI-MS/MS) can be used to rapidly obtain information about the antioxidant activity (i.e., oxidation potential) and capacity (i.e., amount) of polyphenolic compounds, including catechin, kaempferol, resveratrol, quercetin, and quercetin glucosides. The described on-line LC/EC/ESI-MS/MS method facilitates the detection and characterization of individual antioxidants based on a combination of the obtained m/z values for the antioxidants and their oxidation products, the potential dependences for the ion intensities, and correlations between the retention times in the LC, EC, and MS chromatograms. As these results provide patterns that can be used in rapid screening for antioxidants in complex samples, the method should be a valuable complement to chemical assays commonly used to determine the total antioxidant capacity of samples. It is shown that the antioxidant capacity for a mixture of polyphenolic compounds depends on the redox potential employed in the evaluation, and this should consequently be taken into account when comparing results from different total antioxidant capacity assays. It is also demonstrated that the inherent antioxidant capacities of phenolic compounds increase with an increasing number of hydroxyl groups and that the potential needed to oxidize the remaining hydroxyl groups increases successively upon oxidation of the compound. Unlike chemical assays, which generally do not provide any information about the identities of the compounds on the molecular level, the present screening method can be used to identify individual antioxidants, rank compounds with respect to their ease of oxidation, and to study the antioxidant capacity at any redox potential of interest.
|
|
40. |
- Öberg, Elisabet, et al.
(author)
-
C, C-Diacetylenic Phosphaalkenes as Heavy Diethynylethene Analogues
- 2009
-
In: Journal of Organic Chemistry. - : American Chemical Society (ACS). - 0022-3263 .- 1520-6904. ; 74:24, s. 9265-9273
-
Journal article (peer-reviewed)abstract
- A series of C,C-diacetylenic phosphaalkenes 1b−e has been prepared from 1-chloropenta-1,2-dien-4-ynes 6b−e in a reaction with Mes*PCl2 (Mes* = 2,4,6-(tBu)3Ph) in the presence of LDA. Under identical conditions, isomeric butadiyne-substituted phosphaalkenes 2c−f can be obtained from 3-chloropenta-1,4-diynes 5c−f. The title compounds represent rare examples of diethynylethenes in which a constituting methylene has been replaced by a phosphorus center. The formation of both isomers can be rationalized by a common pathway that involves isomeric allenyllithium species. Spectroscopic, electrochemical, and theoretical investigations show that the phosphorus heteroatoms are an intrinsic part of the compounds’ π−systems and lead to decreased HOMO−LUMO gaps compared to those in all-carbon-based reference compounds.
|
|
41. |
- Sellappan, Raja, 1981, et al.
(author)
-
Preparation and characterization of TiO2/carbon composite thin films with enhanced photocatalytic activity
- 2011
-
In: Journal of Molecular Catalysis A. - : Elsevier BV. - 1381-1169 .- 1873-314X. ; 335:1-2, s. 136-144
-
Journal article (peer-reviewed)abstract
- Composite TiO2/carbon thin films prepared by physical vapor deposition techniques on fused silica substrates show enhanced photocatalytic activity towards decomposition of methanol to CO2 and water, as compared to pure TiO2 films of similar thickness. Raman and XRD measurements confirm that annealed TiO2 films exhibit anatase structure while the carbon layer becomes graphitic. Characteristic for the composite films is an enhanced optical absorption in the visible range. The presence of the carbon film causes a shift of the TiO2 absorption edge and modifies its grain size to be smaller. We hypothesize that the observed enhancement of photocatalytic activity is due to synergy effects at the carbon/TiO2 interface, resulting in smaller titania crystallite size and anisotropic charge carrier transport, which in turn reduces their recombination probability.
|
|
42. |
- Katona, Gergely, 1975, et al.
(author)
-
Raman-assisted crystallography reveals end-on peroxide intermediates in a nonheme iron enzyme.
- 2007
-
In: Science (New York, N.Y.). - : American Association for the Advancement of Science (AAAS). - 1095-9203 .- 0036-8075. ; 316:5823, s. 449-53
-
Journal article (peer-reviewed)abstract
- Iron-peroxide intermediates are central in the reaction cycle of many iron-containing biomolecules. We trapped iron(III)-(hydro)peroxo species in crystals of superoxide reductase (SOR), a nonheme mononuclear iron enzyme that scavenges superoxide radicals. X-ray diffraction data at 1.95 angstrom resolution and Raman spectra recorded in crystallo revealed iron-(hydro)peroxo intermediates with the (hydro)peroxo group bound end-on. The dynamic SOR active site promotes the formation of transient hydrogen bond networks, which presumably assist the cleavage of the iron-oxygen bond in order to release the reaction product, hydrogen peroxide.
|
|
43. |
- Asfaw, Habtom Desta
(author)
-
Multifunctional Carbon Foams by Emulsion Templating : Synthesis, Microstructure, and 3D Li-ion Microbatteries
- 2017
-
Doctoral thesis (other academic/artistic)abstract
- Carbon foams are among the existing electrode designs proposed for use in 3D Li-ion microbatteries. For such electrodes to find applications in practical microbatteries, however, their void sizes, specific surface areas and pore volumes need be optimized. This thesis concerns the synthesis of highly porous carbon foams and their multifunctional applications in 3D microbatteries. The carbon foams are derived from polymers that are obtained by polymerizing high internal phase water-in-oil emulsions (HIPEs).In general, the carbonization of the sulfonated polymers yielded hierarchically porous structures with void sizes ranging from 2 to 35 µm and a BET specific surface area as high as 630 m2 g-1. Thermogravimetric and spectroscopic evidence indicated that the sulfonic acid groups, introduced during sulfonation, transformed above 250 oC to thioether (-C-S-) crosslinks which were responsible for the thermal stability and charring tendency of the polymer precursors. Depending on the preparation of the HIPEs, the specific surface areas and void-size distributions were observed to vary considerably. In addition, the pyrolysis temperature could also affect the microstructures, the degree of graphitization, and the surface chemistry of the carbon foams.Various potential applications were explored for the bespoke carbon foams. First, their use as freestanding active materials in 3D microbatteries was studied. The carbon foams obtained at 700 to 1500 oC suffered from significant irreversible capacity loss during the initial discharge. In an effort to alleviate this drawback, the pyrolysis temperature was raised to 2200 oC. The resulting carbon foams were observed to deliver high, stable areal capacities over several cycles. Secondly, the possibility of using these structures as 3D current collectors for various active materials was investigated in-depth. As a proof-of-concept demonstration, positive active materials like polyaniline and LiFePO4 were deposited on the 3D architectures by means of electrodeposition and sol-gel approach, respectively. In both cases, the composite electrodes exhibited reasonably high cyclability and rate performance at different current densities. The syntheses of niobium and molybdenum oxides and their potential application as electrodes in microbatteries were also studied. In such applications, the carbon foams served dual purposes as 3D scaffolds and as reducing reactants in the carbothermal reduction process. Finally, a facile method of coating carbon substrates with oxide nanosheets was developed. The approach involved the exfoliation of crystalline VO2 to prepare dispersions of hydrated V2O5, which were subsequently cast onto CNT paper to form oxide films of different thicknesses.
|
|
44. |
|
|
45. |
- Amombo Noa, Francoise Mystere, 1988, et al.
(author)
-
A hexagon based Mn(ii) rod metal-organic framework - structure, SF 6 gas sorption, magnetism and electrochemistry
- 2023
-
In: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1364-548X .- 1359-7345. ; 59:15, s. 2106-2109
-
Journal article (peer-reviewed)abstract
- A manganese(ii) metal-organic framework based on the hexatopic hexakis(4-carboxyphenyl)benzene, cpb6−: [Mn3(cpb)(dmf)3], was solvothermally prepared showing a Langmuir area of 438 m2 g−1, rapid uptake of sulfur hexafluoride (SF6) as well as electrochemical and magnetic properties, while single crystal diffraction reveals an unusual rod-MOF topology.
|
|
46. |
- Artemenko, A., et al.
(author)
-
Reference XPS spectra of amino acids
- 2021
-
Conference paper (peer-reviewed)abstract
- In this report we present XPS data for five amino acids (AAs) (tryptophan, methionine, glutamine, glutamic acid, and arginine) with different side chain groups measured in solid state (powder form). The theoretically and experimentally obtained chemical structure of AAs are compared. Here, we analyse and discuss C 1 s, N 1 s, O 1s and S 2p core level binding energies, FWHMs, atomic concentrations of the functional groups in AAs. The experimentally obtained and theoretically calculated ratio of atomic concentrations are compared. The zwitterionic nature of methionine and glutamine in solid state was determined from protonated amino groups in N 1s peak and deprotonated carboxylic groups in the C 1s spectrum. The obtained XPS results for AAs well correspond with previously reported data.
|
|
47. |
- Barišić, Antun, et al.
(author)
-
Experimental Data Contributing to the Elusive Surface Charge of Inert Materials in Contact with Aqueous Media
- 2021
-
In: Colloids and interfaces. - : MDPI. - 2504-5377. ; 5:1
-
Journal article (other academic/artistic)abstract
- We studied the charging of inert surfaces (polytetrafluoroethylene, i.e., PTFE; graphite; graphene; and hydrophobic silica) using classical colloid chemistry approaches. Potentiometric titrations showed that these surfaces acquired less charge from proton-related reactions than oxide minerals. The data from batch-type titrations for PTFE powder did not show an effect of ionic strength, which was also in contrast with results for classical colloids. In agreement with classical colloids, the electrokinetic results for inert surfaces showed the typical salt level dependence. In some cases, the point of zero net proton charge as determined from mass and tentatively from acid–base titration differed from isoelectric points, which has also been previously observed, for example by Chibowski and co-workers for ice electrolyte interfaces. Finally, we found no evidence for surface contaminations of our PTFE particles before and after immersion in aqueous solutions. Only in the presence of NaCl-containing solutions did cryo-XPS detect oxygen from water. We believe that our low isoelectric points for PTFE were not due to impurities. Moreover, the measured buffering at pH 3 could not be explained by sub-micromolar concentrations of contaminants. The most comprehensive explanation for the various sets of data is that hydroxide ion accumulation occurred at the interfaces between inert surfaces and aqueous solutions.
|
|
48. |
- Brinck, T, et al.
(author)
-
Green Energetic Materials, Chapter 7: "Green propellants Based on Dinitramide Salts: Mastering Stability and Chemical Compatibility Issues"
- 2014
-
In: Green Energetic Materials, kapitel 7. - 9781119941293 ; , s. 179-204
-
Book chapter (other academic/artistic)abstract
- Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
|
|
49. |
- Hedlund, Artur, et al.
(author)
-
Microstructures of cellulose coagulated in water and alcohols from 1-ethyl-3-methylimidazolium acetate : contrasting coagulation mechanisms
- 2019
-
In: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 26:3, s. 1545-1563
-
Journal article (peer-reviewed)abstract
- Abstract: Coagulation of cellulose solutions is a process whereby many useful materials with variable microstructures and properties can be produced. This study investigates the complexity of the phase separation that generates the structural heterogeneity of such materials. The ionic liquid, 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]), and a co-solvent, dimethylsulfoxide (DMSO), are used to dissolve microcrystalline cellulose in concentrations from 5 to 25 wt%. The solutions are coagulated in water or 2-propanol (2PrOH). The coagulated material is then washed and solvent exchanged (water → 2PrOH → butanone → cyclohexane) in order to preserve the generated microstructures upon subsequent drying before analysis. Sweep electron microscopy images of 50 k magnification reveal open-pore fibrillar structures. The crystalline constituents of those fibrils are estimated using wide-angle X-ray spectroscopy and specific surface area data. It is found that the crystalline order or crystallite size is reduced by an increase in cellulose concentration, by the use of the co-solvent DMSO, or by the use of 2PrOH instead of water as the coagulant. Because previous theories cannot explain these trends, an alternative explanation is presented here focused on solid–liquid versus liquid–liquid phase separations. Graphical abstract: [Figure not available: see fulltext.].
|
|
50. |
- Nyström-Larsson, Ingalill, 1969, et al.
(author)
-
Materialanalys av sydsvenskt bonadsmåleri
- 2007
-
In: Rapport: Sammanfattning av Riksantikvarieämbetets seminarieserie 2007 kring pågående FoU-projekt. ; , s. 23-24
-
Conference paper (other academic/artistic)abstract
- Bonadsmåleriet hade sin storhetstid 1750-1850, och var influerat av medeltida kalkmåleri och bildvävnad i kyrkorna. Bonaderna var temporära och prydde stugorna till fest. Motiven kan vara både bibliska och profana. Materialet är tyger (återanvända och hopfogade) och senare även papper. Mot slutet av perioden övergår hantverket i massproduktion. Tidigare har bonaderna framför allt studerats inom humaniora (exempelvis etnologi) och ett naturvetenskapligt perspektiv har saknats. Därför finns mycket knapphändiga uppgifter om materialet. Syftet med projektet är att: • Kartlägga materialanvändningen • Tolka och förstå materialutvecklingen • Klarlägga innehållet i de otydliga trivialnamnen • Bygga upp ett referensmaterial Genomförande Ett antal frågeställningar har satts upp inför studiet: • Vilka materialval har man gjort? • Skiljer måleriteknik, färg, materialval mellan bonader, och går det att urskilja geografiska skillnader eller är det en tidsmässig utveckling? • Kan bonader attribueras utifrån materialval och färgval? • Vad är det för pigment som döljs i trivialnamnen? Skriftliga källor räcker inte för att svara på dessa frågor utan måste komplet-teras med naturvetenskapliga analyser. Diskussion kring RÄA-seminariets specifika frågeställningar På vad sätt bidrar ert projekt till kunskapsuppbyggnaden inom ert område? • Projektet är också ett pilotprojekt och den kunskap som vinns kan också appliceras på annat än bonadsmåleri. Utifrån resultaten kan man också gå vidare och titta på handelsvägar, infrastruktur etc. • En referensdatabas byggs upp och kan kanske också användas för an-nat material. På vilket sätt skulle resultaten från ert projekt kunna tillämpas mer konkret inom kulturmiljösektorn? • Ett viktigt mål är att hitta analysmetoder som inte förstör materialet, och som helst kan göras på plats så att materialet inte behöver flyttas (Raman spektroskopi). • Som konstaterades ovan kan resultaten från den kemiska analysen visa att en sådan kan komplettera traditionella historiska metoder också inom andra områden än bonadsmåleri. Frågor och öppen diskussion • Ännu har man inte hittat några speciella pigment eller färger, men analysen är inte klar. • Analysmaterialet som valts ut är signerade bonader. • Eftersom uppbyggandet av referensdatabaser är centralt i konserva-torns arbete är det viktigt att sprida resultaten av projektet.
|
|