1. |
- Eivazihollagh, Alireza, et al.
(author)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
In: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Journal article (peer-reviewed)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
2. |
- Stolen, Reidar, et al.
(author)
-
Solcelleteknologi og brannsikkerhet
- 2018
-
Reports (other academic/artistic)abstract
- Bruken av solcelleteknologi er i stor vekst i Norge. I denne studien er branntekniske utfordringer ved bruk av solcelleteknologi undersøkt, med hensyn på brannstart, brannspredning og brannslokking. Studien danner et kunnskapsgrunnlag for å ivareta brannsikkerheten under montering, drift og under slokkeinnsats, samt for å utforme et enhetlig og tydelig regelverk. Resultatene fra studien viser:Brannstart: Solcelleinstallasjoner inneholder mange koblingspunkt, som kan være potensielle tennkilder, og en liten mengde brennbare materialer. Dermed er det som trengs til stede for å starte en brann. Det er viktig at alle kontaktpunkter i solcelleinstallasjonen er robuste og tåler den påkjenningen de blir utsatt for gjennom sin levetid uten at det oppstår dårlig kontakt som kan føre til brann.Brannspredning: For utenpåmonterte solcellemoduler er det ofte en åpen luftspalte mellom modul og bygning. Dersom det er en brann i denne luftspalten, vil varmen kunne bli akkumulert, noe som kan føre til raskere og større brannspredning enn om bygningsoverflaten ikke hadde vært tildekket. I fullskalaforsøk med solcellemoduler montert på tak spredte brannen seg under hele arealet som var dekket av moduler, men stoppet da den nærmet seg kanten av dette arealet. Dette illustrerer viktigheten av at områder med solceller utenpå en bygning blir seksjonert for å unngå brannspredning. Eventuelt kan det benyttes mindre brennbare materialer på taket under solcellemodulene for å motvirke den økte varmepåkjenningen som solcellemodulene gir. Luftspalten mellom modul og bygning kan potensielt også gi endringer i luftstrømningen langs bygget, som igjen kan påvirke brannspredningen.Brannslokking: Brannvesenet har behov for informasjon om det er solcelleinstallasjon i bygget og hvilke deler av det elektriske anlegget som kan være spenningssatt. Under slokkeinnsats må brannvesenet ta hensyn til berøringsfare, og fare for at det kan oppstå lysbuer og andre feil som kan føre til nye antennelsespunkt. Ferskvann kan brukes som slokkemiddel, dette må spyles fra minimum 1 meters avstand med spredt stråle og minimum 5 meters avstand med samlet stråle. Solcellemoduler kan komplisere brannslokking ved at de danner en fysisk barriere mellom brannvesenet og brannen, samt fordi det må tas hensyn til plassering av spenningssatte komponenter. Når disse punktene er tatt høyde for, bør ikke utenpåmonterte solcelleinstallasjoner være et problem.Videre arbeid: For utenpåmonterte solcelleinstallasjoner, er det lite forskning på vertikal montering (på fasader), og hvordan en eventuell endret branndynamikk kan påvirke brannspredning og slokking. Videre er det i dag økende bruk av bygningsintegrerte solcelleinstallasjoner, noe som gir mange mulige nye utfordringer for brannsikkerheten og for regelverk, ettersom solcellen da er en del av bygningskroppen, samtidig som den er en elektrisk komponent. Tysk statistikk tyder på at brannrisiko for slike installasjoner kan være større enn for utenpåmonterte solcelleinstallasjoner, og dette vil det derfor være viktig å undersøke nærmere.
|
|
3. |
- Ågerstrand, Marlene, et al.
(author)
-
Improving Environmental Risk Assessment of Human Pharmaceuticals
- 2015
-
In: Environmental Science & Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 49:9, s. 5336-5345
-
Journal article (peer-reviewed)abstract
- This paper presents 10 recommendations for improving the European Medicines Agency's guidance for environmental risk assessment of human pharmaceutical products. The recommendations are based on up-to-date, available science in combination with experiences from other chemical frameworks such as the REACH-legislation for industrial chemicals. The recommendations concern: expanding the scope of the current guideline; requirements to assess the risk for development of antibiotic resistance; jointly performed assessments; refinement of the test proposal; mixture toxicity assessments on active pharmaceutical ingredients with similar modes of action; use of all available ecotoxicity studies; mandatory reviews; increased transparency; inclusion of emission data from production; and a risk management option. We believe that implementation of our recommendations would strengthen the protection of the environment and be beneficial to society. Legislation and guidance documents need to be updated at regular intervals in order to incorporate new knowledge from the scientific community. This is particularly important for regulatory documents concerning pharmaceuticals in the environment since this is a research field that has been growing substantially in the last decades.
|
|
4. |
- Boons, Frank, et al.
(author)
-
Comparing industrial symbiosis in Europe : towards a conceptual framework and research methodology
- 2015
-
In: International perspectives on industrial ecology. - Cheltenham : Edward Elgar Publishing. - 9781781003565 - 9781781003572 ; , s. 69-88
-
Book chapter (other academic/artistic)abstract
- Industrial symbiosis (IS) continues to raise the interest of researchers and practitioners alike. Individual and haphazard attempts to increase linkages among co-located firms have been complemented by concerted efforts to stimulate the development of industrial regions with intensified resource exchanges that reduce environmental impact. Additionally, there are examples of both spontaneous and facilitated linkages between two or more firms involving flows of materials/energy waste. A striking feature of IS activities is that they are found across diverse social contexts and vary considerably in form (Lombardi et al., 2012); there are substantial differences in the ways in which IS manifests itself. Equally diverse are the activities of policy makers to stimulate such linkages. Such diversity can already be found within Europe, as became apparent in a first meeting among some of the present authors in 2009 (Isenmann and Chernykh, 2009). Researchers present there decided to create a network of European researchers on IS, with the explicit aim to develop a comparative analysis. We can thus provide insight to the relationship between the style of IS and its context and thereby the potential for policy makers in different contexts to learn from each other. Policy learning can be a tempting route to IS, but is fraught with difficulties if the influence of context is not appreciated (e.g., Wang et al., Chapter 6, this volume).
|
|
5. |
- Ahrné, Karin, et al.
(author)
-
Tillstånd och trender för arter och deras livsmiljöer – rödlistade arter i Sverige 2015
- 2015
-
Reports (other academic/artistic)abstract
- 2015 års upplaga av den svenska rödlistan är den fjärde i ordningen. Den är baserad på IUCN:s rödlistningskriterier och revideras vart femte år. I rödlistan bedöms risken som enskilda arter av djur, växter och svampar löper att försvinna från Sverige. Bedömningen utförs av ArtDatabankens medarbetare i samverkan med över 100 externa experter, indelade i 14 expertkommittéer för olika organismgrupper. Under arbetet med 2015 års rödlista har tillstånd och trender bedömts för 21 600 arter och 1 318 lägre taxa (apomiktiska arter, underarter och varieteter), sammanlagt ca 22 900 taxa. Av de bedömda arterna klassificerades 2 029 som hotade (kategorierna CR, EN och VU) och 4 273 som rödlistade (inkluderar även kategorierna NT, RE och DD). Förhållandet mellan antalet rödlistade och antalet bedömda arter ar 19,8 %, vilket är ungefär samma värde som 2010 och 2005. I denna rapport jämförs antalet och andelen rödlistade arter mellan olika organismgrupper, biotoper, substrat och påverkansfaktorer. Texten ar indelad i en allmän del och åtta kapitel inriktade på olika landskapstyper. Landskapstyperna utgör en grov indelning av landets miljöer enligt följande kategorier: Skog, Jordbrukslandskap, Urbana miljöer, Fjäll, Våtmarker, Sötvatten, Havsstränder och Havsmiljöer. Skogen och jordbrukslandskapet är de artrikaste landskapstyperna med 1 800 respektive 1 400 arter som har en stark anknytning dit, och ytterligare flera hundra arter som förekommer där mer sporadiskt. De faktorer som påverkar flest rödlistade arter i Sverige är skogsavverkning och igenväxning, som båda utgör ett hot mot vardera ca 30 % av de rödlistade arterna. Avverkning minskar arealen av skog där naturliga strukturer och naturlig dynamik upprätthålls, och den orsakar därmed förlust av livsmiljöer. Igenväxning orsakas av ett antal faktorer, bland annat upphörande hävd (bete och slåtter), gödsling, trädplantering och brist på naturliga störningsregimer som t.ex. regelbundna översvämningar kring vattendrag och sjöar. Andra viktiga påverkansfaktorer är fiske, torrläggning av våtmarker, tillbakagång hos värdarter (främst alm och ask som drabbats av invasiva svampsjukdomar), klimatförändringar och konkurrens från invasiva arter. IUCN:s rödlisteindex beräknas för ett urval av de bedömda organismgrupperna. Rödlisteindex visar att skillnaderna mellan rödlistorna från 2000, 2005, 2010 och 2015 är små. Ett par undantag finns dock. Groddjur och stora däggdjur har fått en något förbättrad situation sedan 2000. Totalt förefaller det ändå som att trycket mot Sveriges artstock har förblivit relativt konstant under de senaste 15 åren.
|
|
6. |
- Johansson, Björn, 1975, et al.
(author)
-
Power Level Sampling of Metal Cutting Machines for Data Representation in Discrete Event Simulation
- 2015
-
In: International Journal of Production Research. - : Informa UK Limited. - 0020-7543 .- 1366-588X. ; 53:23, s. 7060-7070
-
Journal article (peer-reviewed)abstract
- An extension to the application area for discrete event simulation (DES) has been ongoing since the last decade and focused only on economic aspects to include ecologic sustainability. With this new focus, additional input parameters, such as electrical power consumption of machines, are needed. This paper aim at investigating how NC machine power consumption should be represented in simulation models of factories. The study includes data-sets from three different factories. One factory producing truck engine blocks, one producing brake disc parts for cars and one producing forklift components. The total number of data points analysed are more than 2,45,000, where of over 1,11,000 on busy state for 11 NC machines. The low variability between busy cycles indicates that statistical representations are not adding significant variability. Furthermore, results show that non-value-added activities cause a substantial amount of the total energy consumption, which can be reduced by optimising the production flow using dynamic simulations such as DES.
|
|
7. |
- Siva Subramaniam, Vanajah, 1971, et al.
(author)
-
The support of Quality Management to sustainable development: a literature review
- 2016
-
In: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 138:2, s. 148-157
-
Journal article (peer-reviewed)abstract
- Quality Management is considered to be suitable as support for the integration of sustainability considerations in areas such as product development. The purpose of this paper is to review research in which Quality Management methods, tools or practices have been used in conjunction with sustainable development initiatives. We have identified four themes that synthesize the research on Quality Management and its support to approaches for sustainable development: (I) supporting sustainability through integration of management systems, (II) Quality Management as support to the implementation of Environmental Management Systems and to the management of sustainability, (III) supporting integration of sustainability considerations in daily work, and (IV) supporting stakeholder management and customer focus. By far the most research has been conducted within the first two themes. This paper also contributes with proposals for future research, such as the need to move beyond existing standards and management systems to enable more radical improvements, and the need for empirical evidence of the effect of integrated management systems on environmental performance. We also highlight the point that Quality Management practices and tools must be developed and adapted in order to support sustainability considerations.
|
|
8. |
- Ekener, Elisabeth, 1963-, et al.
(author)
-
Developing Life Cycle Sustainability Assessment methodology by applying values-based sustainability weighting - Tested on biomass based and fossil transportation fuels
- 2018
-
In: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 181, s. 337-351
-
Journal article (peer-reviewed)abstract
- The production and use of transportation fuels can lead to sustainability impacts. Assessing them simultaneously in a holistic way is a challenge. This paper examines methodology for assessing the sustainability performance of products in a more integrated way, including a broad range of social impacts. Life Cycle Sustainability Assessment (LCSA) methodology is applied for this assessment. LSCA often constitutes of the integration of results from social LCA (S-LCA), environmental life cycle assessment (E-LCA) and life cycle costing (LCC). In this study, an S-LCA from an earlier project is extended with a positive social aspect, as well as refined and detailed. E-LCA and LCC results are built from LCA database and literature. Multi Criteria Decision Analysis (MCDA) methodology is applied to integrate the results from the three different assessments into an LCSA. The weighting of key sustainability dimensions in the MCDA is performed in different ways, where the sustainability dimensions are prioritized differently priority based on the assumed values of different stakeholder profiles (Egalitarian, Hierarchist, and Individualist). The developed methodology is tested on selected biomass based and fossil transportation fuels - ethanol produced from Brazilian sugarcane and US corn/maize, and petrol produced from Russian and Nigerian crude oils, where it delineates differences in sustainability performance between products assessed. The outcome in terms of relative ranking of the transportation fuel chains based on sustain ability performance differs when applying different decision-maker profiles. This result highlights and supports views that there is no one single answer regarding which of the alternatives that is most sustainable. Rather, it depends strongly upon the worldview and values held by the decision maker. A key conclusion is that sustainability assessments should pay more attention to potential differences in underlying values held by key stakeholders in relevant societal contexts. The LCSA methodology still faces challenges regarding results integration but MCDA in combination with stakeholder profiles appears to be a useful approach to build on further.
|
|
9. |
- de Klijn-Chevalerias, M., et al.
(author)
-
The Dutch approach for assessing and reducing environmental impacts of building materials
- 2017
-
In: Building and Environment. - : Elsevier BV. - 0360-1323. ; 111, s. 147-159
-
Journal article (peer-reviewed)abstract
- Buildings are one of the largest consumers of energy and materials, and hence they are also one of the largest contributors to negative environmental impacts. Traditionally, energy consumed by buildings during their operation phase was the most significant in their lifecycles and far exceeded the embodied energy. However, in contemporary low-energy buildings, the embodied energy is proportionally higher because of the prevalent use of energy-intensive materials. To determine the embodied energy and environmental impacts of building materials, the Dutch have developed an assessment method, which has also been adapted by BREEAM-NL. This paper offers an overview of the Dutch approach for assessing the environmental impacts of building materials and demonstrates its practical application. The use of the Dutch Assessment Method to identify, and quantify materials-related design improvements has been demonstrated through an exemplifying case study. It has been identified that the environmental impact of a building is largely influenced by the material choices made at the early design stage of the project.
|
|
10. |
- André, Hampus, 1989
(author)
-
Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products
- 2018
-
Licentiate thesis (other academic/artistic)abstract
- Natural resources such as ecosystems, land, water and metals underpin the functioning of economies and human well-being, and are becoming increasingly scarce due to growth in population and affluence. Metals are increasingly demanded for their specific properties as modern technology develops. The dependence on metals is of growing concern due to the environmental impacts related, for example, to energy use and local impacts from mining, as well as the scarcity risks posed by socio-economic, geological and geopolitical constraints. Thus, there is a clear need to use metals and other natural resources more efficiently. The vision of a circular economy has been proposed as a way to do this, for example by improving durability, reusing, repairing and recycling. Such so-called resource-efficiency (RE) measures are commonly assumed to be environmentally beneficial, although the evidence is not plentiful. It is plausible that focusing on recirculating products and materials could shift burdens to other environmental impacts or life cycle stages. It has therefore been argued that a life cycle-based approach, such as in life cycle assessment (LCA), is useful to critically assess the environmental implications of RE measures. LCA aims to quantify the environmental impacts of products over their entire life cycles - from cradle to grave - assessing a wide range of impacts such as toxicity, climate change and metal resource use. For metal resource use, however, there are a number of perspectives as to what constitutes the actual environmental problem. These perspectives are represented in a variety of life cycle impact assessment methods (LCIA) which have previously been shown to give diverging results. Electronic products are emblematic of metal resource use challenges since they deploy a broad spectrum of scarce metals. This thesis aims to provide knowledge on the potential for RE measures to reduce the environmental impacts of electronic products, by addressing the following research questions: (1) What resource-efficiency measures result in reduced potential environmental impacts and resource use – for what types of products and under what conditions? (2) How does extended use of electronic products through design for increased technical lifetime, reuse and repair affect environmental impacts, particularly metal resource use? (3) How does the application of different LCIA methods for metal resource use influence interpretations of resource-efficiency measures applied to electronic products? This thesis builds on three appended papers which are all based on comparative assessments of resource efficiency, studied as resource use and environmental impacts per function delivered, using LCA and material flow analysis. The results indicate that extended use of electronic products through increasing technical lifetimes, reusing and repairing, is generally resource-efficient. Exceptions may occur, however, if extended use is insufficient to motivate impacts from producing more durable products or spare parts. Use extension of electronic products leads to resource efficiency in two distinct ways: through the intended use extension and by increasingly steering material flows into recycling. Further resource efficiency could be realised by combining RE measures over the entire life cycles of products. With regards to metal resource use, the choice of LCIA method can influence the interpretation of the results of RE measures for electronic products. Therefore, it is advisable to use several complementary LCIA methods to minimise the risks of overlooking potentially important resources issues. Furthermore, better understanding and transparency of such issues is valuable in order to provide more comprehensive information to decision-makers.
|
|