1. |
- Katsiotis, Christos S., et al.
(author)
-
Development of a simple paste for 3D printing of drug formulations containing a mesoporous material loaded with a poorly water-soluble drug
- 2024
-
In: European journal of pharmaceutics and biopharmaceutics. - : Elsevier. - 0939-6411 .- 1873-3441. ; 198
-
Journal article (peer-reviewed)abstract
- Poorly soluble drugs represent a substantial portion of emerging drug candidates, posing significant challenges for pharmaceutical formulators. One promising method to enhance the drug’s dissolution rate and, consequently, bioavailability involves transforming them into an amorphous state within mesoporous materials. These materials can then be seamlessly integrated into personalized drug formulations using Additive Manufacturing (AM) techniques, most commonly via Fused Deposition Modeling. Another innovative approach within the realm of AM for mesoporous material-based formulations is semi-solid extrusion (SSE). This study showcases the feasibility of a straightforward yet groundbreaking hybrid 3D printing system employing SSE to incorporate drug-loaded mesoporous magnesium carbonate (MMC) into two different drug formulations, each designed for distinct administration routes. MMC was loaded with the poorly water-soluble drug ibuprofen via a solvent evaporation method and mixed with PEG 400 as a binder and lubricant, facilitating subsequent SSE. The formulation is non-aqueous, unlike most pastes which are used for SSE, and thus is beneficial for the incorporation of poorly water-soluble drugs. The 3D printing process yielded tablets for oral administration and suppositories for rectal administration, which were then analyzed for their dissolution behavior in biorelevant media. These investigations revealed enhancements in the dissolution kinetics of the amorphous drug-loaded MMC formulations. Furthermore, an impressive drug loading of 15.3 % w/w of the total formulation was achieved, marking the highest reported loading for SSE formulations incorporating mesoporous materials to stabilize drugs in their amorphous state by a wide margin. This simple formulation containing PEG 400 also showed advantages over other aqueous formulations for SSE in that the formulations did not exhibit weight loss or changes in size or form during the curing process post-printing. These results underscore the substantial potential of this innovative hybrid 3D printing system for the development of drug dosage forms, particularly for improving the release profile of poorly water-soluble drugs.
|
|
2. |
|
|
3. |
|
|
4. |
|
|
5. |
- Katsiotis, Christos S., et al.
(author)
-
3D-Printed Mesoporous Carrier System for Delivery of Poorly Soluble Drugs
- 2021
-
In: Pharmaceutics. - : MDPI. - 1999-4923. ; 13:7
-
Journal article (peer-reviewed)abstract
- Fused deposition modelling (FDM) is the most extensively employed 3D-printing technique used in pharmaceutical applications, and offers fast and facile formulation development of personalized dosage forms. In the present study, mesoporous materials were incorporated into a thermoplastic filament produced via hot-melt extrusion and used to produce oral dosage forms via FDM. Mesoporous materials are known to be highly effective for the amorphization and stabilization of poorly soluble drugs, and were therefore studied in order to determine their ability to enhance the drug-release properties in 3D-printed tablets. Celecoxib was selected as the model poorly soluble drug, and was loaded into mesoporous silica (MCM-41) or mesoporous magnesium carbonate. In vitro drug release tests showed that the printed tablets produced up to 3.6 and 1.5 times higher drug concentrations, and up to 4.4 and 1.9 times higher release percentages, compared to the crystalline drug or the corresponding plain drug-loaded mesoporous materials, respectively. This novel approach utilizing drug-loaded mesoporous materials in a printed tablet via FDM shows great promise in achieving personalized oral dosage forms for poorly soluble drugs.
|
|
6. |
|
|
7. |
- Katsiotis, Christos S.
(author)
-
Additive Manufacturing and Mesoporous Materials for Pharmaceutical Applications
- 2024
-
Doctoral thesis (other academic/artistic)abstract
- Additive Manufacturing (AM), over the past decade, has evolved into a versatile technology with significant applications in pharmaceutical research. This technology enables the production of drug formulations tailored to individual patients, offering customization in both dosage and dissolution profiles. While challenges in mass production persist, 3D printing, particularly through techniques like Fused Deposition Modeling (FDM) and Semi Solid Extrusion (SSE), proves ideal for crafting smaller batches of personalized dosage forms.A prevalent issue in drug development revolves around poor water solubility, impacting bioavailability upon oral administration. To combat this, the integration of mesoporous materials emerges as a promising strategy to enhance the dissolution of poorly water-soluble drugs. Here, the applicability of mesoporous materials is explored, as well as their incorporation with various AM techniques. Overall, the thesis dives into the investigation of combinatorial formulations, incorporating at least one 3D printed component to address specific requirements in drug delivery. By combining FDM with Selective Laser Sintering (SLS), a hybrid two-compartmental formulation is developed. The durable FDM-printed shell regulates buffer medium access to the contained SLS-produced inserts loaded with the drug. Varying printing parameters and insert combinations within the shell showcase the adjustability and flexibility of this hybrid approach.Tablets with different infill percentages, containing drug-loaded mesoporous materials, are developed. Poorly water-soluble drugs are successfully amorphized within mesoporous material pores, formulated into filaments through Hot Melt Extrusion (HME), and printed via FDM. These tablets exhibit improved dissolution compared to the crystalline drug, with the dissolution behavior regulated also by the infill percentage.The study explores the impact of drug-loaded mesoporous materials on HME-produced filament properties, studying their effect on maximum tensile strength and Young’s modulus. The relationship between these properties and filament printability is investigated. Additionally, a protective effect of mesoporous materials on drugs from thermal degradation is revealed.For Semi Solid Extrusion (SSE) manufactured formulations, a paste is developed, comprising mesoporous material loaded with a poorly water-soluble drug and an excipient. This paste demonstrates favorable rheological properties and easy extrudability via a syringe. The formulation proves versatile for printing dosage forms for both oral and rectal administration, with the printed tablet and suppository exhibiting effective drug release.In conclusion, this work presents valuable strategies for developing patient-tailored dosage forms, addressing specific pharmaceutical challenges like poor solubility. The integration of mesoporous materials and various 3D printing techniques showcases a promising direction for personalized medicine in the pharmaceutical field.
|
|
8. |
|
|
9. |
- Katsiotis, Christos S., et al.
(author)
-
Combinatorial 3D printed dosage forms for a two-step and controlled drug release
- 2023
-
In: European Journal of Pharmaceutical Sciences. - : Elsevier. - 0928-0987 .- 1879-0720. ; 187
-
Journal article (peer-reviewed)abstract
- Fused deposition modeling (FDM) and selective laser sintering (SLS) are two of the most employed additive manufacturing (AM) techniques within the pharmaceutical research field. Despite the numerous advantages of different AM methods, their respective drawbacks have yet to be fully addressed, and therefore combinatorial systems are starting to emerge. In the present study, hybrid systems comprising SLS inserts and a two-compartment FDM shell are developed to achieve controlled release of the model drug theophylline. Via the use of SLS a partial amorphization of the drug is demonstrated, which can be advantageous in the case of poorly soluble drugs, and it is shown that sintering parameters can regulate the dosage and release kinetics of the drug from the inserts. Furthermore, via different combinations of inserts within the FDM-printed shell, various drug release patterns, such as a two-step or prolonged release, can be achieved. The study serves as a proof of concept, highlighting the advantages of combining two AM techniques, both to overcome their respective shortcomings and to develop modular and highly tunable drug delivery devices.
|
|
10. |
|
|