1. |
- Lin, Yuanbao, et al.
(author)
-
18.9% Efficient Organic Solar Cells Based on n-Doped Bulk-Heterojunction and Halogen-Substituted Self-Assembled Monolayers as Hole Extracting Interlayers
- 2022
-
In: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 12:45
-
Journal article (peer-reviewed)abstract
- The influence of halogen substitutions (F, Cl, Br, and I) on the energy levels of the self-assembled hole-extracting molecule [2-(9H-Carbazol-9-yl)ethyl]phosphonic acid (2PACz), is investigated. It is found that the formation of self-assembled monolayers (SAMs) of [2-(3,6-Difluoro-9H-carbazol-9-yl)ethyl]phosphonic acid (F-2PACz), [2-(3,6-Dichloro-9H-carbazol-9-yl)ethyl]phosphonic acid (Cl-2PACz), [2-(3,6-Dibromo-9H-carbazol-9-yl)ethyl]phosphonic acid (Br-2PACz), and [2-(3,6-Diiodo-9H-carbazol-9-yl)ethyl]phosphonic acid (I-2PACz) directly on indium tin oxide (ITO) increases its work function from 4.73 eV to 5.68, 5.77, 5.82, and 5.73 eV, respectively. Combining these ITO/SAM electrodes with the ternary bulk-heterojunction (BHJ) system PM6:PM7-Si:BTP-eC9 yields organic photovoltaic (OPV) cells with power conversion efficiency (PCE) in the range of 17.7%-18.5%. OPVs featuring Cl-2PACz SAMs yield the highest PCE of 18.5%, compared to cells with F-2PACz (17.7%), Br-2PACz (18.0%), or I-2PACz (18.2%). Data analysis reveals that the enhanced performance of Cl-2PACz-based OPVs relates to the increased hole mobility, decreased interface resistance, reduced carrier recombination, and longer carrier lifetime. Furthermore, OPVs featuring Cl-2PACz show enhanced stability under continuous illumination compared to ITO/PEDOT:PSS-based cells. Remarkably, the introduction of the n-dopant benzyl viologen into the BHJ further boosted the PCE of the ITO/Cl-2PACz cells to a maximum value of 18.9%, a record-breaking value for SAM-based OPVs and on par with the best-performing OPVs reported to date.
|
|
2. |
- Charney, Alexander W, et al.
(author)
-
Contribution of Rare Copy Number Variants toBipolar Disorder Risk Is Limited to Schizoaffective Cases.
- 2019
-
In: Biological psychiatry. - : Elsevier BV. - 1873-2402 .- 0006-3223. ; 86:2, s. 110-119
-
Journal article (peer-reviewed)abstract
- Genetic risk for bipolar disorder (BD) is conferred through many common alleles, while a role for rare copy number variants (CNVs) is less clear. Subtypes of BD including schizoaffective disorder bipolar type (SAB), bipolar I disorder (BD I), and bipolar II disorder (BD II) differ according to the prominence and timing of psychosis, mania, and depression. The genetic factors contributing to the combination of symptoms among these subtypes are poorly understood.Rare large CNVs were analyzed in 6353 BD cases (3833 BD I [2676 with psychosis, 850 without psychosis, and 307 with unknown psychosis history], 1436 BD II, 579 SAB, and 505 BD not otherwise specified) and 8656 controls. CNV burden and a polygenic risk score (PRS) for schizophrenia were used to evaluate the relative contributions of rare and common variants to risk of BD, BD subtypes, and psychosis.CNV burden did not differ between BD and controls when treated as a single diagnostic entity. However, burden in SAB was increased relative to controls (p= .001), BD I (p= .0003), and BD II (p= .0007). Burden and schizophrenia PRSs were increased in SAB compared with BD I with psychosis (CNV p= .0007, PRS p= .004), and BD I without psychosis (CNV p= .0004, PRS p= 3.9× 10-5). Within BD I, psychosis was associated with increased schizophrenia PRSs (p= .005) but not CNV burden.CNV burden in BD is limited to SAB. Rare and common genetic variants may contribute differently to risk for psychosis and perhaps other classes of psychiatric symptoms.
|
|
3. |
- Hynynen, Jonna, 1987, et al.
(author)
-
Enhanced Thermoelectric Power Factor of Tensile Drawn Poly(3-hexylthiophene)
- 2019
-
In: ACS Macro Letters. - : American Chemical Society (ACS). - 2161-1653. ; 8:1, s. 70-76
-
Journal article (peer-reviewed)abstract
- © 2018 American Chemical Society. The thermoelectric power factor of a broad range of organic semiconductors scales with their electrical conductivity according to a widely obeyed power law, and therefore, strategies that permit this empirical trend to be surpassed are highly sought after. Here, tensile drawing of the conjugated polymer poly(3-hexylthiophene) (P3HT) is employed to create free-standing films with a high degree of uniaxial alignment. Along the direction of orientation, sequential doping with a molybdenum tris(dithiolene) complex leads to a 5-fold enhancement of the power factor beyond the predicted value, reaching up to 16 μW m-1 K-2 for a conductivity of about 13 S cm-1. Neither stretching nor doping affect the glass transition temperature of P3HT, giving rise to robust free-standing materials that are of interest for the design of flexible thermoelectric devices.
|
|
4. |
- Järsvall, Emmy, 1992, et al.
(author)
-
Double Doping of a Low-Ionization-Energy Polythiophene with a Molybdenum Dithiolene Complex
- 2022
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 34:12, s. 5673-5679
-
Journal article (peer-reviewed)abstract
- Doping of organic semiconductors is crucial for tuning the charge-carrier density of conjugated polymers. The exchange of more than one electron between a monomeric dopant and an organic semiconductor allows the polaron density to be increased relative to the number of counterions that are introduced into the host matrix. Here, a molybdenum dithiolene complex with a high electron affinity of 5.5 eV is shown to accept two electrons from a polythiophene that has a low ionization energy of 4.7 eV. Double p-doping is consistent with the ability of the monoanion salt of the molybdenum dithiolene complex to dope the polymer. The transfer of two electrons to the neutral dopant was also confirmed by electron paramagnetic resonance spectroscopy since the monoanion, but not the dianion, of the molybdenum dithiolene complex features an unpaired electron. Double doping allowed an ionization efficiency of 200% to be reached, which facilitates the design of strongly doped semiconductors while lessening any counterion-induced disruption of the nanostructure.
|
|
5. |
- Lin, Yuanbao, et al.
(author)
-
18.73% efficient and stable inverted organic photovoltaics featuring a hybrid hole-extraction layer
- 2023
-
In: Materials Horizons. - : Royal Society of Chemistry (RSC). - 2051-6355 .- 2051-6347. ; 10:4, s. 1292-1300
-
Journal article (peer-reviewed)abstract
- Developing efficient and stable organic photovoltaics (OPVs) is crucial for the technology's commercial success. However, combining these key attributes remains challenging. Herein, we incorporate the small molecule 2-((3,6-dibromo-9H-carbazol-9-yl)ethyl)phosphonic acid (Br-2PACz) between the bulk-heterojunction (BHJ) and a 7 nm-thin layer of MoO3 in inverted OPVs, and study its effects on the cell performance. We find that the Br-2PACz/MoO3 hole-extraction layer (HEL) boosts the cell's power conversion efficiency (PCE) from 17.36% to 18.73% (uncertified), making them the most efficient inverted OPVs to date. The factors responsible for this improvement include enhanced charge transport, reduced carrier recombination, and favourable vertical phase separation of donor and acceptor components in the BHJ. The Br-2PACz/MoO3-based OPVs exhibit higher operational stability under continuous illumination and thermal annealing (80 degrees C). The T-80 lifetime of OPVs featuring Br-2PACz/MoO3 - taken as the time over which the cell's PCE reduces to 80% of its initial value - increases compared to MoO3-only cells from 297 to 615 h upon illumination and from 731 to 1064 h upon continuous heating. Elemental analysis of the BHJs reveals the enhanced stability to originate from the partially suppressed diffusion of Mo ions into the BHJ and the favourable distribution of the donor and acceptor components induced by the Br-2PACz.
|
|
6. |
- Sahalianov, Ihor, et al.
(author)
-
UV-to-IR Absorption of Molecularly p-Doped Polythiophenes with Alkyl and Oligoether Side Chains: Experiment and Interpretation Based on Density Functional Theory
- 2020
-
In: Journal of Physical Chemistry B. - : American Chemical Society (ACS). - 1520-5207 .- 1520-6106. ; 124:49, s. 11280-11293
-
Journal article (peer-reviewed)abstract
- The UV-to-IR transitions in p-doped poly(3-hexylthiophene) (P3HT) with alkyl side chains and polar polythiophene with tetraethylene glycol side chains are studied experimentally by means of the absorption spectroscopy and computationally using density functional theory (DFT) and tight-binding DFT. The evolution of electronic structure is calculated as the doping level is varied, while the roles of dopant ions, chain twisting, and ∝-πstacking are also considered, each of these having the effect of broadening the absorption peaks while not significantly changing their positions. The calculated spectra are found to be in good agreement with experimental spectra obtained for the polymers doped with a molybdenum dithiolene complex. As in other DFT studies of doped conjugated polymers, the electronic structure and assignment of optical transitions that emerge are qualitatively different from those obtained through earlier "traditional"approaches. In particular, the two prominent bands seen for the p-doped materials are present for both polarons and bipolarons/polaron pairs. The lowest energy of these transitions is due to excitation from the valence band to a spin-resolved orbitals located in the gap between the bands. The higher-energy band is a superposition of excitation from the valence band to a spin-resolved orbitals in the gap and an excitation between bands.
|
|
7. |
- Untilova, Viktoriia, et al.
(author)
-
High Thermoelectric Power Factor of Poly(3-hexylthiophene) through In-Plane Alignment and Doping with a Molybdenum Dithiolene Complex
- 2020
-
In: Macromolecules. - : American Chemical Society (ACS). - 1520-5835 .- 0024-9297. ; 53:15, s. 6314-6321
-
Journal article (peer-reviewed)abstract
- We report a record thermoelectric power factor of up to 160 μW m-1 K-2 for the conjugated polymer poly(3-hexylthiophene) (P3HT). This result is achieved through the combination of high-temperature rubbing of thin films together with the use of a large molybdenum dithiolene p-dopant with a high electron affinity. Comparison of the UV-vis-NIR spectra of the chemically doped samples to electrochemically oxidized material reveals an oxidation level of 10%, i.e., one polaron for every 10 repeat units. The high power factor arises due to an increase in the charge-carrier mobility and hence electrical conductivity along the rubbing direction. We conclude that P3HT, with its facile synthesis and outstanding processability, should not be ruled out as a potential thermoelectric material. ©
|
|