| 11. |
- Li, Ying-Ying, et al.
(author)
-
Quantum Chemical Study of the Mechanism of Water Oxidation Catalyzed by a Heterotrinuclear Ru2Mn Complex
- 2019
-
In: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 12:5, s. 1101-1110
-
Journal article (peer-reviewed)abstract
- The heterotrinuclear complex A {[Ru-II(H2O)(tpy)](2)(mu-[Mn-II(H2O)(2)(bpp)(2)])}(4+) [tpy=2,2 ':6 ',2 ''-terpyridine, bpp=3,5-bis(2-pyridyl)pyrazolate] was found to catalyze water oxidation both electrochemically and photochemically with [Ru(bpy)(3)](3+) (bpy=2,2 '-bipyridine) as the photosensitizer and Na2S2O8 as the electron acceptor in neutral phosphate buffer. The mechanism of water oxidation catalyzed by this unprecedented trinuclear complex was studied by density functional calculations. The calculations showed that a series of oxidation and deprotonation events take place from A, leading to the formation of complex 1 (formal oxidation state of Ru1(IV)Mn(III)Ru2(III)), which is the starting species for the catalytic cycle. Three sequential oxidations of 1 result in the generation of the catalytically competing species 4 (formal oxidation state of Ru1(IV)Mn(V)Ru2(IV)), which triggers the O-O bond formation. The direct coupling of two adjacent oxo ligands bound to Ru and Mn leads to the production of a superoxide intermediate Int1. This step was calculated to have a barrier of 7.2 kcal mol(-1) at the B3LYP*-D3 level. Subsequent O-2 release from Int1 turns out to be quite facile. Other possible pathways were found to be much less favorable, including water nucleophilic attack, the coupling of an oxo and a hydroxide, and the direct coupling pathway at a lower oxidation state ((RuMnRuIV)-Mn-IV-Ru-IV).
|
|
| 12. |
- Liseev, Timofey, et al.
(author)
-
Synthetic strategies to incorporate Ru-terpyridyl water oxidation catalysts into MOFs : direct synthesis vs. post-synthetic approach
- 2020
-
In: Dalton Transactions. - : ROYAL SOC CHEMISTRY. - 1477-9226 .- 1477-9234. ; 49:39, s. 13753-13759
-
Journal article (peer-reviewed)abstract
- Incorporating molecular catalysts into metal-organic frameworks (MOFs) is a promising strategy for improving their catalytic longevity and recyclability. In this article, we investigate and compare synthetic routes for the incorporation of the potent water oxidation catalyst Ru(tda)(pyCO(2)H)(2) (tda = 2,2':6',2 ''-terpyridine-6,6 ''-dicarboxylic acid, pyCO(2)H = iso-nicotinic acid) as a structural linker into a Zr-based UiO-type MOF. The task is challenging with this particular metallo-linker because of the equatorial dangling carboxylates that can potentially compete for Zr-coordination, as well as free rotation of the pyCO(2)H groups around the HO(2)Cpy center dot center dot center dot Ru center dot center dot center dot pyCO(2)H axis. As a consequence, all attempts to synthesize a MOF with the metallo-linker directly under solvothermal conditions led to amorphous materials with the Ru(tda) (pyCO(2)H)(2) linker coordinating to the Zr nodes in ill-defined ways, resulting in multiple waves in the cyclic voltammograms of the solvothermally obtained materials. On the other hand, an indirect post-synthetic approach in which the Ru(tda)(pyCO(2)H)(2) linker is introduced into a preformed edba-MOF (edba = ethyne dibenzoic acid) of UiO topology results in the formation of the desired material. Interestingly, two distinctly different morphologies of the parent edba-MOF have been discovered, and the impact that the morphological difference has on linker incorporation is investigated.
|
|
| 13. |
- Planas, Nora, et al.
(author)
-
Electronic Structure of Oxidized Complexes Derived from cis-Ru(II)(bpy)(2)(H(2)O)(2)](2+) and Its Photoisomerization Mechanism
- 2011
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 50:21, s. 11134-11142
-
Journal article (peer-reviewed)abstract
- The geometry and electronic structure of cis-[Ru(II)(bpy)(2)(H(2)O)(2)](2+) and its higher oxidation state species up formally to Ru(VI) have been studied by means of UV-vis, EPR, XAS, and DFT and CASSCF/CASPT2 calculations. DFT calculations of the molecular structures of these species show that, as the oxidation state increases, the Ru-O bond distance decreases, indicating increased degrees of Ru-O multiple bonding. In addition, the O-Ru-O valence bond angle increases as the oxidation state increases. EPR spectroscopy and quantum chemical calculations indicate that low-spin configurations are favored for all oxidation states. Thus, cis-[Ru(IV)(bpy)(2)(OH)(0)](2+) (d(4)) has a singlet ground state and is EPR-silent at low temperatures, while cis-[Ru(V)(bpy)(2)(O)(OH)](2+) (d(3)) has a doublet ground state. XAS spectroscopy of higher oxidation state species and DFT calculations further illuminate the electronic structures of these complexes, particularly with respect to the covalent character of the O-Ru-O fragment. In addition, the photochemical isomerization of cis-[Ru(II)(bpy)(2)(H(2)O)(2)](2+) to its trans-[Ru(II)(bpy)(2)(H(2)O)(2)](2+) isomer has been fully characterized through quantum chemical calculations. The excited-state process is predicted to involve decoordination of one aqua ligand, which leads to a coordinatively unsaturated complex that undergoes structural rearrangement followed by recoordination of water to yield the trans isomer.
|
|
| 14. |
- Roeser, Stephan, et al.
(author)
-
Synthesis, Structure, and Electronic Properties of RuN(6) Dinuclear Ru-Hbpp Complexes
- 2012
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 51:1, s. 320-327
-
Journal article (peer-reviewed)abstract
- A series of RuN(6) dinuclear Ru-Hbpp complexes (Hbpp is the dinucleating tetraaza ligand 3,5-bis(pyridyl)pyrazole) of general formula {[Ru(II)(R(2)-trpy)(MeCN)](2)(mu-R(1)-bpp)}3(+), 10(3+)-14(3+), (R(1) = H, Me, or NO(2). and R(2) = H, Me, MeO; see Scheme 1) has been prepared from their Cl(-) or AcO(-) bridged precursors. The complexes have been characterized by UV-vis, NMR, CV, and some by X-ray. Complexes 10(3+)-14(3+), Ru(2)(II,II), were oxidized by 1 equiv in solution, leading to the mixed valence Ru(2)(II,III) complexes 10(4+)-14(4+) containing one unpaired electron and were characterized by EPR and UV-vis-near-IR, which showed metal-centered spin and the presence of low-energy IVCT bands. The H(ab) parameter indicates a relatively strong electronic coupling between the two ruthenium centers (class II). Further two electron oxidation in solution of the 10(3+)-14(3+) led to the formation of EPR silent Ru(2)(II,III) complexes 10(5+)-14(5+), that were further characterized by UV-vis-NIR TD-DFT calculations are employed to assign the nature of the UV-vis transitions for the complexes in the various oxidation states, which are of metal to ligand charge transfer (MLCT) type for Ru(2)(II,II) and ligand to,m. metal charge transfer (LMCT) type for Ru(2)(III,II) and Ru(2)(III,III).
|
|
| 15. |
|
|
| 16. |
- Shatskiy, Andrey, et al.
(author)
-
Electrochemically Driven Water Oxidation by a Highly Active Ruthenium-Based Catalyst
- 2019
-
In: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 12:10, s. 2251-2262
-
Journal article (peer-reviewed)abstract
- The highly active ruthenium-based water oxidation catalyst [Ru-X(mcbp)(OHn)(py)(2)] [mcbp(2-)=2,6-bis(1-methyl-4-(carboxylate)benzimidazol-2-yl)pyridine; n=2, 1, and 0 for X=II, III, and IV, respectively], can be generated in a mixture of Ru-III and Ru-IV states from either [Ru-II(mcbp)(py)(2)] or [Ru-III(Hmcbp)(py)(2)](2+) precursors. The precursor complexes are isolated and characterized by single-crystal X-ray analysis, NMR, UV/Vis, EPR, and FTIR spectroscopy, ESI-HRMS, and elemental analysis, and their redox properties are studied in detail by electrochemical and spectroscopic methods. Unlike the parent catalyst [Ru(tda) (py)(2)] (tda(2-)=[2,2:6,2-terpyridine]-6,6-dicarboxylate), for which full transformation into the catalytically active species [Ru-IV(tda)(O)(py)(2)] could not be carried out, stoichiometric generation of the catalytically active Ru-aqua complex [Ru-X(mcbp)(OHn)(py)(2)] from the Ru-II precursor was achieved under mild conditions (pH7.0) and short reaction times. The redox properties of the catalyst were studied and its activity for electrocatalytic water oxidation was evaluated, reaching a maximum turnover frequency (TOFmax) of around 40000s(-1) at pH9.0 (from foot-of-the-wave analysis), which is comparable to the activity of the state-of-the-art catalyst [Ru-IV(tda)(O)(py)(2)].
|
|
| 17. |
- Thapper, Anders, et al.
(author)
-
Artificial Photosynthesis for Solar Fuels – an Evolving Research Field within AMPEA, a Joint Programme of the European Energy Research Alliance
- 2013
-
In: Green. - : Walter de Gruyter GmbH. - 1869-8778 .- 1869-876X. ; 3:1, s. 43-57
-
Journal article (peer-reviewed)abstract
- On the path to an energy transition away from fossil fuels to sustainable sources, the European Union is for the moment keeping pace with the objectives of the Strategic Energy Technology-Plan. For this trend to continue after 2020, scientific breakthroughs must be achieved. One main objective is to produce solar fuels from solar energy and water in direct processes to accomplish the efficient storage of solar energy in a chemical form. This is a grand scientific challenge. One important approach to achieve this goal is Artificial Photosynthesis. The European Energy Research Alliance has launched the Joint Programme “Advanced Materials & Processes for Energy Applications” (AMPEA) to foster the role of basic science in Future Emerging Technologies. European researchers in artificial photosynthesis recently met at an AMPEA organized workshop to define common research strategies and milestones for the future. Through this work artificial photosynthesis became the first energy research sub-field to be organised into what is designated “an Application” within AMPEA. The ambition is to drive and accelerate solar fuels research into a powerful European field – in a shorter time and with a broader scope than possible for individual or national initiatives. Within AMPEA the Application Artificial Photosynthesis is inclusive and intended to bring together all European scientists in relevant fields. The goal is to set up a thorough and systematic programme of directed research, which by 2020 will have advanced to a point where commercially viable artificial photosynthetic devices will be under development in partnership with industry.
|
|
