11. |
|
|
12. |
|
|
13. |
- Hu, H., et al.
(author)
-
TuB4.1-chip based thz emitter for ultra-high speed THz wireless communication (Invited)
- 2019
-
In: IEEE Photonics Society Summer Topical Meeting Series 2019, SUM 2019. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728105970
-
Conference paper (peer-reviewed)abstract
- By using a monolithically integrated dual-distributed feedback (DFB) laser chip attached to a photomixing uni-Travelling carrier photodiode (UTC-PD) with a THz antenna, single-channel THz photonic-wireless transmission system with a net rate of 131 Gbit/s over a wireless distance of 10.7 m has been achieved.
|
|
14. |
- Jia, S., et al.
(author)
-
Integrated Dual-DFB Laser for 408 GHz Carrier Generation Enabling 131 Gbit/s Wireless Transmission over 10.7 Meters
- 2019
-
In: 2019 Optical Fiber Communications Conference and Exhibition, OFC 2019 - Proceedings. - Washington, D.C. : Institute of Electrical and Electronics Engineers Inc.. - 9781943580538
-
Conference paper (peer-reviewed)abstract
- A monolithically integrated dual-DFB laser generates a 408 GHz carrier used for demonstrating a record-high single-channel bit rate of 131 Gbit/s transmitted over 10.7 m. 16-QAM-OFDM modulation and specific nonlinear equalization techniques are employed
|
|
15. |
- Jiang, Xiaoqing, et al.
(author)
-
High-Performance Regular Perovskite Solar Cells Employing Low-Cost Poly(ethylenedioxythiophene) as a Hole-Transporting Material
- 2017
-
In: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Journal article (peer-reviewed)abstract
- Herein, we successfully applied a facile in-situ solid-state synthesis of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a HTM, directly on top of the perovskite layer, in conventional mesoscopic perovskite solar cells (PSCs) (n-i-p structure). The fabrication of the PEDOT film only involved a very simple in-situ solid-state polymerisation step from a monomer 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) made from a commercially available and cheap starting material. The ultraviolet photoelectron spectroscopy (UPS) demonstrated that the as-prepared PEDOT film possesses the highest occupied molecular orbital (HOMO) energy level of -5.5 eV, which facilitates an effective hole extraction from the perovskite absorber as confirmed by the photoluminescence measurements. Optimised PSC devices employing this polymeric HTM in combination with a low-cost vacuum-free carbon cathode (replacing the gold), show an excellent power conversion efficiency (PCE) of 17.0% measured at 100 mW cm(-2) illumination (AM 1.5G), with an open-circuit voltage (V-oc) of 1.05 V, a short-circuit current density (J(sc)) of 23.5 mA/cm(2) and a fill factor (FF) of 0.69, respectively. The present finding highlights the potential application of PEDOT made from solid-state polymerisation as a HTM for cost-effective and highly efficient PSCs.
|
|
16. |
- Kerrebrouck, Joris Van, et al.
(author)
-
High-speed PAM4-based Optical SDM Interconnects with Directly Modulated Long-wavelength VCSEL
- 2019
-
In: Journal of Lightwave Technology. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 0733-8724 .- 1558-2213. ; 37:2, s. 356-362
-
Journal article (peer-reviewed)abstract
- This paper reports the demonstration of high-speed PAM-4 transmission using a 1.5-μm single-mode vertical cavity surface emitting laser (SM-VCSEL) over multicore fiber with 7 cores over different distances. We have successfully generated up to 70 Gbaud 4-level pulse amplitude modulation (PAM-4) signals with a VCSEL in optical back-to-back, and transmitted 50 Gbaud PAM-4 signals over both 1-km dispersion-uncompensated and 10-km dispersion-compensated in each core, enabling a total data throughput of 700 Gbps over the 7-core fiber. Moreover, 56 Gbaud PAM-4 over 1-km has also been shown, whereby unfortunately not all cores provide the required 3.8 × 10$^-3$bit error rate (BER) for the 7% overhead-hard decision forward error correction (7% OH HDFEC). The limited bandwidth of the VCSEL and the adverse chromatic dispersion of the fiber are suppressed with pre-equalization based on accurate end-to-end channel characterizations. With a digital post-equalization, BER performance below the 7% OH-HDFEC limit is achieved over all cores. The demonstrated results show a great potential to realize high-capacity and compact short-reach optical interconnects for data centers.
|
|
17. |
- Lin, Rui, et al.
(author)
-
Real-time 100 Gbps/lambda/core NRZ and EDB IM/DD Transmission over 10 km Multicore Fiber
- 2018
-
In: 2018 Optical Fiber Communications Conference and Exposition (OFC). - : Institute of Electrical and Electronics Engineers (IEEE). - 9781943580385 ; , s. 1-3
-
Conference paper (peer-reviewed)abstract
- A BiCMOS chip-based real-time IM/DD spatial division multiplexing system is experimentally demonstrated for short-reach communications. 100 Gbps/λ/core NRZ and EDB transmission is achieved below 7%-overhead HD-FEC limit after 10km 7-core fiber with optical dispersion compensation.
|
|
18. |
- Lin, Rui, et al.
(author)
-
Real-time 100 Gbps/λ/core NRZ and EDB IM/DD transmission over multicore fiber for intra-datacenter communication networks
- 2018
-
In: Optics Express. - : OSA - The Optical Society. - 1094-4087. ; 26:8, s. 10519-10526
-
Journal article (peer-reviewed)abstract
- A BiCMOS chip-based real-time intensity modulation/direct detection spatial division multiplexing system is experimentally demonstrated for both optical interconnects. 100 Gbps/λ/core electrical duobinary (EDB) transmission over 1 km 7-core multicore fiber (MCF) is carried out, achieving KP4 forward error correction (FEC) limit (BER < 2E-4). Using optical dispersion compensation, 7 × 100 Gbps/λ/core transmission of both non-return-to-zero (NRZ) and EDB signals over 10 km MCF transmission is achieved with BER lower than 7% overhead hard-decision FEC limit (BER < 3.8E-3). The integrated low complexity transceiver IC and analog signal processing approach make such a system highly attractive for the high-speed intra-datacenter interconnects..
|
|
19. |
- Lin, Rui, et al.
(author)
-
Spatial division multiplexing for optical data center networks
- 2018
-
In: 22ND INTERNATIONAL CONFERENCE ON OPTICAL NETWORK DESIGN AND MODELING (ONDM 2018). - : IEEE. ; , s. 239-241
-
Conference paper (peer-reviewed)abstract
- Emerging mobile and cloud applications drive ever-increasing capacity demands, particularly for short-reach optical communications, where low-cost and low-power solutions are highly required. Spatial division multiplexing (SDM) techniques provide a promising way to scale up the lane count per fiber, while reducing the number of fiber connections and patch cords, and hence simplifying cabling complexity. This talk will address challenges on both system and network levels, and report our recent development on SDM techniques for optical data center networks.
|
|
20. |
- Ozolins, Oskars, et al.
(author)
-
100 Gbaud PAM4 link without EDFA and post-equalization for optical interconnects
- 2019
-
In: IET Conference Publications. - : Institution of Engineering and Technology (IET). ; 2019:CP765
-
Conference paper (peer-reviewed)abstract
- We show 100 Gbaud PAM4 400 meters link with performance below the 7% HD-FEC limit of 5x10-3 without optical amplification and post-equalization. We also show 300 Gbps PAM8 line rate transmission over 400 meters of SSMF in C-band.
|
|