11. |
- Schnack-Petersen, H, et al.
(author)
-
Superdeformed triaxial bands in Lu-163,165
- 1995
-
In: Nuclear Physics A. - : Elsevier BV. - 0375-9474. ; 594:2, s. 175-202
-
Journal article (peer-reviewed)abstract
- An experimental investigation of the nucleus 165Lu, using the reactions 138Ba(31P,4n) 165Lu and 150Sm(19F,4n) 165Lu at beam energies of E = 155 and 95 MeV, respectively, has been performed. Among other additions to the existing level scheme, a new band, with transition energies almost identical to a strongly deformed (β2 0.42) πi13/2[660 1/2+] band recently discovered in 163Lu has been established. A theoretical analysis of the structure of the two Lu isotopes, 165Lu and 163Lu is carried out by detailed calculations of total potential energy surfaces for specific configurations. By a diabatic treatment of crossings specific proton configurations as πi13/2[660 1/2+] are identified throughout the deformation space and as a function of spin. It is found as a general feature that well deformed local minima of considerable nonaxial symmetry coexist with a normal deformed global minimum. The depth of these local minima depend on configuration. The structure of the different global and local minima found in these surfaces are analysed and discussed in terms of occupation of available basis configurations and their orientation relative to the rotation axis. The strongly deformed minima are found to belong to a group of superdeformed triaxial structures, expected to appear at low energies for certain favourable combinations of proton and neutron numbers.
|
|
12. |
- Svensson, C. E., et al.
(author)
-
Observation and Quadrupole Moment Measurement of the First Superdeformed Band in the A~60 Mass Region
- 1997
-
In: Physical Review Letters. - 1079-7114. ; 79:7, s. 1233-1236
-
Journal article (peer-reviewed)abstract
- A high-spin rotational cascade of six gamma rays has been observed in Zn-62. The quadrupole moment of 2.7(-0.5)(+0.7) e b measured for this band corresponds to a deformation beta(2) = 0.45(-0.07)(+0.10). The properties of this band are in excellent agreement with calculations that predict high-spin superdeformed bands in Zn-62 with deformations beta(2) = 0.41-0.49. These results establish a new region of superdeformation for nuclei with neutron and proton numbers N, Z approximate to 30-32.
|
|
13. |
- Aleksandrovskii, A. N., et al.
(author)
-
Negative thermal expansion of fullerite C60 at helium temperatures
- 1997
-
In: Low temperature physics (Woodbury, N.Y., Print). - : AIP Publishing. - 1063-777X .- 1090-6517. ; 23:11, s. 943-946
-
Journal article (peer-reviewed)abstract
- The thermal expansion of fullerite C60 has been measured in the temperature range 2–9 K. A compacted fullerite sample with a diameter of about 6 mm and height of 2.4 mm was used. It was found that at temperatures below ~ 3.4 K the linear thermal expansion coefficient becomes negative. At temperatures above 5 K our results are in good agreement with the available literature data. A qualitative explanation of the results is proposed
|
|
14. |
- Andersson, Ove, et al.
(author)
-
Reorientational relaxation in C60 following a pressure induced change in the pentagon/hexagon equilibrium ratio
- 1995
-
In: Physics Letters A. - : Elsevier Science B.V.. - 0375-9601 .- 1873-2429. ; 206:3-4, s. 260-264
-
Journal article (peer-reviewed)abstract
- The orientational structure of C60 depends on pressure and temperature. Pressurization below the glass transition temperature Tg can freeze in non-equilibrium orientational structures. The relaxation of such structures on heating through Tg has been studied through thermal conductivity measurements and the effects observed are explained in a simple model.
|
|
15. |
- Andersson, Ove, et al.
(author)
-
Thermal conductivity of C60 at pressures up to 1 GPa and temperatures in the range 50-300 K
- 1996
-
In: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 54:5, s. 3093-3100
-
Journal article (peer-reviewed)abstract
- The thermal conductivity λ of C60 shows anomalies near 260 K and 90 K which are associated with the well-established phase transition and glass transition, respectively. Both transition temperatures increase with pressure, at the rates 120 K GPa-1 and 62 K GPa-1, respectively. With increasing temperature, λ of the simple cubic (sc) phase increased below 170 K (glasslike behavior) but decreased above. The glasslike behavior of λ is probably due to a substantial amount of lattice defects. Possible reasons for the change of sign of dλ/dT near 170 K are discussed. In the face centered cubic (fcc) phase (T≳260 K at atmospheric pressure) λ was almost independent of temperature, a behavior which is far from that of an ordered crystal (λ∝T-1 for T≳Debye temperature). This result can be attributed to the molecular orientational disorder of the fcc phase. The relaxation behavior associated with the glassy state and its unusually strong dependence on thermal history are discussed briefly, and data which support a previously reported relaxation model are presented. At room temperature, the density dependencies of λ, (∂ lnλ/∂ lnρ)T, were 5.5 and 9.5 for the fcc and sc phases, which are values typical for an orientationally disordered phase and a normal crystal phase, respectively.
|
|
16. |
- Chen, W., et al.
(author)
-
Electronic and geometric structure of clean Pt3Ti(111)
- 1994
-
In: Physical Review B. - 0163-1829 .- 1095-3795. ; 50:8, s. 5620-5627
-
Journal article (peer-reviewed)abstract
- Photoemission spectra and scanning tunneling microscopy (STM) images of the clean Pt3Ti(111) surface are presented. Grazing-emission core-level spectra show that the topmost layer is pure platinum, modified compared with the Pt(111) surface. The Pt 4f levels at the surface are shifted 0.4 eV toward the Fermi level relative to bulk Pt3Ti while the Pt 4f and Ti 2p levels in the bulk are shifted 0.4 and 1.3 eV to higher binding energy relative to pure bulk platinum and titanium, respectively, Tunneling measurements show a surface with only metallic atoms and a small p(2×2) buckling. Our observations of molecularly adsorbed CO are not compatible with metallic titanium atoms at the surface and the STM data thus indirectly confirm that only platinum atoms are present in the topmost layer. Linear muffin-tin-orbital calculations of the bulk band structure and valence-band photoemission spectra reveal highly hybridized electron states between the Pt d and Ti d levels. The calculations give a minor charge transfer from Ti to Pt, 0.37 electrons per Ti atom, but the large core-level shifts reflect the stability of the alloy and the response to the excitation rather than the amount of charge transfer. The observed segregation of platinum to the surface and the altered electronic structure of the topmost layer, due to interaction with the underlying alloy, are in full agreement with earlier conclusions based on low-energy electron-diffraction measurements and on the chemical properties of the surface. © 1994 The American Physical Society.
|
|
17. |
- Chen, W., et al.
(author)
-
Redox properties of titanium oxides on Pt3Ti
- 1995
-
In: Journal of Physical Chemistry. - : American Chemical Society (ACS). - 0022-3654 .- 1541-5740. ; 99:34, s. 12892-12895
-
Journal article (peer-reviewed)abstract
- The morphology and electronic structure of surface-segregated titanium oxides on Pt3Ti(111) are presented. Core level photoemission spectra at grazing emission reveal two states of oxidation: a dominant and reducible four-valent oxide together with a small amount of a three-valent oxide is produced by oxidation in 0 2 at and below 400°C; an irreducible three-valent oxide by oxidation in 02 at and above 450 °C. The ratio between the active four-valent and the inactive three-valent oxides decreases with increasing oxidation temperature. The probability for reduction by CO is almost unity for the Ti 4+ oxide, and the conclusion must be that the four-valent oxide plays an active role for catalytic reactions. Scanning tunneling measurements relate these observations to changes in the dispersion and nucleation of the oxide overlayer. The four-valent oxide grows as islands with remaining areas open for CO adsorption while the three-valent oxide spreads on and blocks the crystal surface. Photoemission spectra relate these dispersion effects to an electronic interaction between the Ti 3+ oxide and adjacent Pt atoms. The above observations are in accordance with the common picture of dispersion effects in titania-supported SMSI catalysts and prove that interfacial energies play a crucial role whether the dominant phase is metallic or an oxide.
|
|
18. |
- Lundin, Anders, et al.
(author)
-
Compressibility and Structure of C70
- 1995
-
In: Europhysics letters. - : IOP Publishing. - 0295-5075 .- 1286-4854. ; 30:8, s. 469-474
-
Journal article (peer-reviewed)abstract
- The compressibility of C70 has been investigated by means of direct piston and cylinder measurements in the temperature range 150 to 365 K and up to 1 GPa. At 296 and 343 K we find a very rapid change of volume with pressure below 0.15 GPa. We tentatively interpret this as a continuous molecular reorientation with pressure, probably resulting in a transformation from a mixture of face-centred cubic (f.c.c.) and rhombohedral (r.h.) phases to mainly pure r.h. phase. At 365 K as well as at 236 K and below we see no anomalies indicating any structural or rotational anomalies in the pressure range investigated. The zero-pressure bulk modulus decreases with increasing temperature, from 13.1 GPa at 185 K to 7.9 GPa at 365 K. Our volumetric measurements confirm a recently proposed phase diagram for C70.
|
|
19. |
- Lundin, Anders, et al.
(author)
-
Compressibility of C61D2 up to 1 GPa in the temperature range 175 - 345 K
- 1996
-
In: Carbon. - : Elsevier Science Ltd.. - 0008-6223 .- 1873-3891. ; 34:9, s. 1119-1121
-
Journal article (peer-reviewed)abstract
- We have measured the bulk modulus K for C61D2 up to 1 GPa in the temperature range 175–343 K. For face-centered cubic C61D2 above 290 K, we find an anomalously low value for K below about 0.15 GPa, possibly indicating pressure-induced changes in the structure. The (extrapolated) zero-p bulk modulus K(0) decreases with increasing T from 6.7 GPa at 175 K to 5.2 GPa at 343 K. A comparison with hypothetical expanded f.c.c. C60 with the same lattice constant shows that K(0) values are similar, indicating that the main intermolecular interactions are still between molecular bellies, not the sidegroups.
|
|
20. |
- Nagel, Peter, et al.
(author)
-
C60 one- and two-dimensional polymers, dimers, and hard fullerite: Thermal expansion, anharmonicity, and kinetics of depolymerization
- 1999
-
In: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 60:24, s. 16920-16927
-
Journal article (peer-reviewed)abstract
- We report on high-resolution thermal expansion measurements of high-temperature-pressure treated C60 [one-dimensional (1D) and (2D) polymers and “hard fullerite”], as well as of C60 dimers and single crystal monomer C60 between 10 and 500 K. Polymerization drastically reduces the thermal expansivity from the values of monomeric C60 due to the stronger and less anharmonic covalent bonds between molecules. The expansivity of the “hard” material approaches that of diamond. The large and irreversible volume change upon depolymerization between 400 and 500 K makes it possible to study the kinetics of depolymerization, which is described excellently by a simple activated process, with activation energies of 1.9±0.1 eV (1D and 2D polymers) and 1.75±0.05 eV (dimer). Although the activation energies are very similar for the different polymers, the depolymerization rates differ by up to four orders of magnitude at a given temperature, being fastest for the dimers. Preliminary kinetic data of C70 polymers are presented as well.
|
|