1. |
- Ahmed, Trifa M., et al.
(author)
-
Native and oxygenated polycyclic aromatic hydrocarbons in ambient air particulate matter from the city of Sulaimaniyah in Iraq
- 2015
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 116, s. 44-50
-
Journal article (peer-reviewed)abstract
- The concentrations of 43 polycyclic aromatic hydrocarbons (PAHs) and 4 oxygenated PAHs (OPAHs) are reported for the first time in particulate matter (PM10) sampled in the air of the city of Sulaimaniyah in Iraq. The total PAH concentration at the different sampling sites varied between 9.3 and 114 ng/m(3). The corresponding values of the human carcinogen benzotalpyrene were between 0.3 and 6.9 ng/m(3), with most samples exceeding the EU annual target value of 1 ng/m(3). The highly carcinogenic dibenzopyrene isomers dibenzo[a,l]pyrene, dibenzo[a,e]pyrene, dibenzo[a,i]pyrene and dibenzo[a,h]pyrene constituted 0.1-0.4% of the total PAH concentration. However, when scaling for relative cancer potencies using toxic equivalency factors, a benzo[a]pyrene equivalent concentration of dibenzo[a,l]pyrene equal to that of benzo[a]pyrene was obtained, indicating that the contribution of dibenzo[a,l]pyrene to the carcinogenicity of the PAHs could be similar to that of benzo[a]pyrene. A high correlation between the determined concentrations of the dibenzopyrene isomers and benzo[a]pyrene was found, which supported the use of benzo[a]pyrene as an indicator for the carcinogenicity of PAHs in ambient air. The total concentrations of the four OPAHs, 9,10-anthraquinone, 4H-cyclopenta[def]phenanthren-4-one, benzanthrone, and 7,12-benz[a]anthraquinone, varied between 0.6 and 8.1 ng/m(3), with 9,10-anthraquinone being the most abundant OPAH in all of the samples.
|
|
2. |
- Anderson, Maria, 1983, et al.
(author)
-
Characterization of particles from a marine engine operating at low loads
- 2015
-
In: Atmospheric Environment. - : Elsevier BV. - 1873-2844 .- 1352-2310. ; 101, s. 65-71
-
Journal article (peer-reviewed)abstract
- Particle emissions from a marine diesel engine operating at low loads with four different fuels were characterized with respect to particle number (PN) and particle mass (PM), size distribution, volatility and chemical composition. The four different fuels used were Swedish Environmental class 1 (MK1) and class 3 diesel (MK3), heavy fuel oil (HFO, 0.12 wt% S) and marine diesel oil (MDO, 0.52 wt% S). The measurements were performed for a marine diesel engine in a test-bed engine lab and the particle emissions were measured with an Engine Exhaust Particle Sizer and a Dust Monitor, giving the number concentrations in the size range of 5.6-560 nm and 300 nm to 20 gm, respectively. To quantify the amount of solid particles a thermodenuder was used. Additionally, filter samples were taken for gravimetric, black carbon (BC) and elemental analysis. The particle emissions showed a bimodal size distribution by number and the number concentrations were dominated by nanoparticles (diameter (Dp) 50 nm generally were solid primary particles. Combustion of HFO resulted in the highest PN and PM concentrations. Emission factors (EFs) for PM and PN for both the total particle emissions and the fraction of primary, solid particles are presented for different fuels and loads. EFs for nitrogen oxides (NOx), BC and some elements (Ca, Fe, V, Ni, Zn) are presented as well. This study contributes to understanding particle emissions from potential future fuels as well as emissions in ports and coastal areas where lower engine loads are common.
|
|
3. |
- Avagyan, Rozanna, et al.
(author)
-
Particulate hydroxy-PAH emissions from a residential wood log stove using different fuels and burning conditions
- 2016
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 140, s. 1-9
-
Journal article (peer-reviewed)abstract
- Hydroxylated polycyclic aromatic hydrocarbons are oxidation products of polycyclic aromatic hydrocarbons, but have not been studied as extensively as polycyclic aromatic hydrocarbons. Several studies have however shown that hydroxylated polycyclic aromatic hydrocarbons have toxic and carcinogenic properties. They have been detected in air samples in semi urban areas and combustion is assumed to be the primary source of those compounds. To better understand the formation and occurrence of particulate hydroxylated polycyclic aromatic hydrocarbons from residential wood log stove combustion, 9 hydroxylated polycyclic aromatic hydrocarbons and 2 hydroxy biphenyls were quantified in particles generated from four different types of wood logs (birch, spruce, pine, aspen) and two different combustion conditions (nominal and high burn rate). A previously developed method utilizing liquid chromatography photo ionization tandem mass spectrometry and pressurized liquid extraction was used. Polycyclic aromatic hydrocarbons were analyzed along with hydroxylated polycyclic aromatic hydrocarbons. The hydroxylated polycyclic aromatic hydrocarbon emissions varied significantly across different wood types and burning conditions; the highest emissions for nominal burn rate were from spruce and for high burn rate from pine burning. Emissions from nominal burn rate corresponded on average to 15% of the emissions from high burn rate, with average emissions of 218 mu g/MJ(fuel) and 32.5 mu g/MJ(fuel) for high burn rate and nominal burn rate, respectively. Emissions of the measured hydroxylated polycyclic aromatic hydrocarbons corresponded on average to 28% of polycyclic aromatic hydrocarbons emissions. This study shows that wood combustion is a large emission source of hydroxylated polycyclic aromatic hydrocarbons and that not only combustion conditions, but also wood type influences the emissions of hydroxylated polycyclic aromatic hydrocarbons and polycyclic aromatic hydrocarbons. There are few studies that have determined hydroxylated polycyclic aromatic hydrocarbons in emissions from wood combustion, and it is therefore necessary to further investigate the formation, occurrence and distribution of these compounds as they are present in significant amounts in wood smoke particles.
|
|
4. |
- Budhavant, K. B., et al.
(author)
-
Black carbon in cloud-water and rain water during monsoon season at a high altitude station in India
- 2016
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 129, s. 256-264
-
Journal article (peer-reviewed)abstract
- We present results of measurements of black carbon (BC) from ground-based wet-only rainwater (RW) and cloud-water (CW) sampling at a mountain field station, Sinhagad, situated in south western India during the period from June 2008 to October 2010. The amount of BC in the sample was determined by photometry at a wavelength of 528 nm after a procedure including the filtration through a 0.4 mu m polycarbonate membrane filter. Water soluble concentrations of major anions in RW and CW were also determined. The average concentration of BC in RW (16 mu mol dm(-3)) is higher by at least a factor 2 than that found in similar studies reported from other parts of the world. On the other hand, the average concentration of BC in CW (47 mu mol dm(-3)) is lower by about a factor of 2 than that found at other sites. The ratio between the average concentrations in CW and RW varies from 2 (K+) to 7 (SO42-). The ratio for BC was about 3. No significant difference was observed for pH. Analysis of air mass back trajectories and of correlations between the various components indicates that long range transport of pollutants and dust from East Africa and Southern part of the Arabian peninsula might contribute to the high concentrations of BC and some of the ionic constituents at Sinhagad during the monsoon season.
|
|
5. |
- Burman, Jan, et al.
(author)
-
Issues when linking computational fluid dynamics for urban modeling to toxic load models : The need for further research
- 2015
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 104, s. 112-124
-
Journal article (peer-reviewed)abstract
- In order to predict casualties caused by chemical hazards in densely populated areas, state-of-the-art Computational Fluid Dynamic (CFD) techniques could be utilized together with toxic load models. In the current study, simulations of consequences of hypothetical releases of toxic gas in a city center are presented and discussed. CFD models that reproduce flow statistics would be most appropriate for this purpose since it could be expected that they will more realistically represent the environment. However, since concentration-peaks in the ever-present spatiotemporal fluctuations of airborne chemicals contribute so much to the toxic load, it is shown that straight-forward direct linking of a CFD model to a toxic load model is not a suitable approach for predicting consequences of a toxic release. Furthermore, it is demonstrated that the use of different turbulence models leads to different casualty assessments. Obviously, there is an urgent need to establish widely accepted methods, ideally with known uncertainty measures. Thus, further research in this area is of great importance.
|
|
6. |
- Carlsen, Hanne Krage, et al.
(author)
-
Indicators of residential traffic exposure: Modelled NOX, traffic proximity, and self-reported exposure in RHINE III
- 2017
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 167, s. 416-425
-
Journal article (peer-reviewed)abstract
- Few studies have investigated associations between self-reported and modelled exposure to traffic pollution. The objective of this study was to examine correlations between self-reported traffic exposure and modelled (a) NOX and (b) traffic proximity in seven different northern European cities; Aarhus (Denmark), Bergen (Norway), Gothenburg, Umeå, and Uppsala (Sweden), Reykjavik (Iceland), and Tartu (Estonia). We analysed data from the RHINE III (Respiratory Health in Northern Europe, www.rhine.nu) cohorts of the seven study cities. Traffic proximity (distance to the nearest road with >10,000 vehicles per day) was calculated and vehicle exhaust (NOX) was modelled using dispersion models and land-use regression (LUR) data from 2011. Participants were asked a question about self-reported traffic intensity near bedroom window and another about traffic noise exposure at the residence. The data were analysed using rank correlation (Kendall's tau) and inter-rater agreement (Cohen's Kappa) between tertiles of modelled NOX and traffic proximity tertile and traffic proximity categories (0–150 metres (m), 150–200 m, >300 m) in each centre. Data on variables of interest were available for 50–99% of study participants per each cohort. Mean modelled NOX levels were between 6.5 and 16.0 μg/m3; median traffic intensity was between 303 and 10,750 m in each centre. In each centre, 7.7–18.7% of respondents reported exposure to high traffic intensity and 3.6–16.3% of respondents reported high exposure to traffic noise. Self-reported residential traffic exposure had low or no correlation with modelled exposure and traffic proximity in all centres, although results were statistically significant (tau = 0.057–0.305). Self-reported residential traffic noise correlated weakly (tau = 0.090–0.255), with modelled exposure in all centres except Reykjavik. Modelled NOX had the highest correlations between self-reported and modelled traffic exposure in five of seven centres, traffic noise exposure had the highest correlation with traffic proximity in tertiles in three centres. Self-reported exposure to high traffic intensity and traffic noise at each participant's residence had low or weak although statistically significant correlations with modelled vehicle exhaust pollution levels and traffic proximity. © 2017
|
|
7. |
- Cavalli, F., et al.
(author)
-
A European aerosol phenomenology-4 : Harmonized concentrations of carbonaceous aerosol at 10 regional background sites across Europe
- 2016
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 144, s. 133-145
-
Journal article (peer-reviewed)abstract
- Although particulate organic and elemental carbon (OC and EC) are important constituents of the suspended atmospheric particulate matter (PM), measurements of OC and EC are much less common and More uncertain than measurements of e.g. the ionic components of PM. In the framework of atmospheric research infrastructures supported by the European Union, actions have been undertaken to determine and mitigate sampling artefacts, and assess the comparability of OC and EC data obtained in a network of 10 atmospheric observatories across Europe. Positive sampling artefacts (from 0:4 to 2.8 mu g C/m(3)) and analytical discrepancies (between -50% and +40% for the EC/TC ratio) have been taken into account to generate a robust data set, from which we established the phenomenology of carbonaceous aerosols at regional background sites in Europe. Across the network, TC and EC annual average concentrations range from 0.4 to 9 mu g C/m(3), and from 0.1 to 2 mu g C/m(3), respectively. TC/PM10 annual mean ratios range from 0.11 at a Mediterranean site to 0.34 at the most polluted continental site, and TC/PM2.5 ratios are slightly greater at all sites (0.15-0.42). EC/TC annual mean ratios range from 0.10 to 0.22, and do not depend much on PM concentration levels, especially in winter. Seasonal variations in PM and TC concentrations, and in TC/PM and EC/TC ratios, differ across the network, which can be explained by seasonal changes in PM source contributions at some sites.
|
|
8. |
- Cho, Chaeyoon, et al.
(author)
-
Observation-based estimates of the mass absorption cross-section of black and brown carbon and their contribution to aerosol light absorption in East Asia
- 2019
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 212, s. 65-74
-
Journal article (peer-reviewed)abstract
- In this study, we estimated the contribution of black carbon (BC) and brown carbon (BrC) to aerosol light absorption from surface in-situ and aerosol robotic network (AERONET) columnar observations. The mass absorption cross-section (MAC) of BC (MAC(BC)) was estimated to be 6.4 +/- 1.5 m(2) g(-1) at 565 mn from in-situ aerosol measurements at Gosan Climate Observatory (GCO), Korea, in January 2014, which was lower than those observed in polluted urban areas. A BrC MAC of 0.62 +/- 0.06 m(2) g(-1) (565 mn) in our estimate is approximately ten times lower than MACK at 565 nm. The contribution of BC and BrC to the carbonaceous aerosol absorption coefficient at 565 nm from the in-situ measurements was estimated at 88.1 +/- 7.4% and 11.9 +/- 7.4%, respectively at GCO. Similarly, the contribution of BC and BrC to the absorption aerosol optical depth (AAOD) for carbonaceous aerosol (CA), constrained by AERONET observations at 14 sites over East Asia by using different spectral dependences of the absorption (i.e., absorption Angstrom exponent) of BC and BrC, was 84.9 +/- 2.8% and 15.1 +/- 2.8% at 565 nm, respectively. The contribution of BC to CA AAOD was greater in urban sites than in the background areas, whereas the contribution of BrC to CA AAOD was higher in background sites. The overall contribution of BC to CA AAOD decreased by 73%-87% at 365 nm, and increased to 93%-97% at 860 nm. The contribution of BrC to CA AAOD decreased significantly with increasing wavelength from approximately 17% at 365 nm to 4% at 860 nm.
|
|
9. |
- Cirino, Glauber, et al.
(author)
-
Observations of Manaus urban plume evolution and interaction with biogenic emissions in GoAmazon 2014/5
- 2018
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 191, s. 513-524
-
Journal article (peer-reviewed)abstract
- As part of the Observations and Modeling of the Green Ocean Amazon (GoAmazon 2014/5) Experiment, detailed aerosol and trace gas measurements were conducted near Manaus, a metropolis located in the central Amazon Basin. Measurements of aerosol particles and trace gases were done downwind Manaus at the sites T2 (Tiwa Hotel) and T3 (Manacapuru), at a distance of 8 and 70 km from Manaus, respectively. Based on in-plume measurements closer to Manaus (site T2), the chemical signatures of city emissions were used to improve the interpretation of pollutant levels at the T3 site. We derived chemical and physical properties for the city's atmospheric emission ensemble, taking into account only air masses impacted by the Manaus plume at both sites, during the wet and dry season Intensive Operating Periods (IOPs). At T2, average concentrations of aerosol number (CN), CO and SO2 were 5500 cm(-3) (between 10 and 490 nm), 145 ppb and 0.60 ppb, respectively, with a typical ratio ACN/ACO of 60-130 particles cm(-3) ppb(-1). The aerosol scattering (at RH < 60%) and absorption at 637 nm at T2 ranged from 10 to 50 M m(-1) and 5-10 M m(-1), respectively, leading to a mean single scattering albedo (SSA) of 0.70. In addition to identifying periods dominated by Manaus emissions at both T2 and T3, the plume transport between the two sampling sites was studied using back trajectory calculations. Results show that the presence of the Manaus plume at site T3 was important mainly during the daytime and at the end of the afternoons. During time periods directly impacted by Manaus emissions, an average aerosol number concentration of 3200 cm(-3) was measured at T3. Analysis of plume evolution between T2 and T3 indicates a transport time of 4-5 h. Changes of submicron organic and sulfate aerosols ratios relative to CO (Delta OA/Delta CO and Delta SO4/Delta CO, respectively) indicate significant production of secondary organic aerosol (SOA), corresponding to a 40% mass increase in OA and a 30% in SO4 mass concentration. Similarly, during air mass arrival at T3 the SSA increased to 0.83 from 0.70 at T2, mainly associated with an increase in organic aerosol concentration. Aerosol particle size distributions show a strong decrease in the Aitken nuclei mode (10-100 nm) during the transport from T2 to T3, in particular above 30 nm, as a result of efficient coagulation processes into larger particles. A decrease of 30% in the particle number concentration and an increase of about 50 nm in geometric mean diameter were observed from T2 to T3 sites. The study of the evolution of aerosol properties downwind of the city of Manaus improves our understanding of how coupling of anthropogenic and biogenic sources may be impacting the sensitive Amazonian atmosphere.
|
|
10. |
- Córdoba-Jabonero, Carmen, et al.
(author)
-
Performance of a dust model to predict the vertical mass concentration of an extreme Saharan dust event in the Iberian Peninsula : Comparison with continuous, elastic, polarization-sensitive lidars
- 2019
-
In: Atmospheric Environment. - : Elsevier. - 1352-2310 .- 1873-2844. ; 214
-
Journal article (peer-reviewed)abstract
- An intense dusty event unusually occurred in wintertime over the Iberian Peninsula was detected over two Spanish NASA/MPLNET sites: the temporary Torrejón Observational Tower for Environmental Monitoring (TOTEM, 40.5°N 3.5°W) and the Barcelona station (BCN, 41.4°N 2.1°E). The highest dust incidence was observed from 22 to 23 February 2017; this two-day dusty scenario is examined in order to evaluate the performance of the operational NMMB/BSC-Dust model on forecasted mass concentration profiling in comparison with polarized Micro-Pulse (P-MPL) mass estimates for dust particles. First, the optical properties of the dust (DD) were effectively separated from the non-dust (ND) component by using the combined P-MPL/POLIPHON method. Lidar-derived DD optical depths reached maximums of 1.6–1.7 (±0.1) at both stations. Typical features for dust were obtained: linear particle depolarization ratios between 0.3 and 0.4, and lidar ratios in the range of 41–70 sr and 36–66 sr, respectively, for TOTEM and BCN. Lower AERONET Ångström exponents were reported for TOTEM (0.12 ± 0.04) than at BCN (0.5 ± 0.3). HYSPLIT back-trajectory analysis showed air masses coming from the Sahara region, mostly transporting dust particles. AERONET-derived Mass Extinction Efficiencies (MEE) under dusty conditions were used for the extinction-to-mass conversion procedure as applied to the P-MPL measurements: MEE values were lower at TOTEM (0.57 ± 0.01 m2 g−1) than those found at BCN (0.87 ± 0.10 m2 g−1). Those results reveal that dust particles were predominantly larger at TOTEM than those observed at BCN, and a longer transport of dust particles from the Sahara sources to BCN could favour a higher gravitational settling of coarser particles before reaching BCN than TOTEM. A comparative analysis between profiles as obtained from the lidar DD component of the mass concentration and those forecasted by the NMMB/BSC-Dust model (25 available dusty profiles) was performed. The degree of agreement between both datasets was determined by the percentage of dusty cases satisfying selected model performance criteria (favourable cases) of two proxies: the Mean Fractional Bias, MFB" role="presentation" style="box-sizing: border-box; margin: 0px; padding: 0px; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; position: relative;">MFBMFB, and the correlation coefficient, CC" role="presentation" style="box-sizing: border-box; margin: 0px; padding: 0px; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; position: relative;">CCCC. A good agreement is found (72% and 76%, respectively, of favourable cases); however, large discrepancies are found at low altitudes between the dust model and the lidar observations, mostly at early stages of the arrival of the dust intrusion. Higher model-derived centre-of-mass (CoM) heights are found in 60% of the cases (with differences < 15% w.r.t. the lidar CoM, whose values ranged between 1.8 and 2.3 km height). In addition, modelled mass loading (ML) values were generally higher than the lidar-derived ones. However, the evolution of the mass loading along the two days, 22 and 23 February, was rather similar for both the model forecasting and lidar observations at both stations. The relative ML differences (<50%) of the mass loading represented 60% of all cases. Discrepancies can be based on the uncertainties in the lidar retrievals (mainly, the use of single extinction-to-mass conversion factors). In general, a moderately good agreement is observed between the P-MPL-derived dust mass concentration profiles and the NMMB/BSC-Dust model ones at both sites; large discrepancies are found at lower altitudes, plausibly due to a lower sedimentation of dust particles coming from upper layers by gravitational settling than that introduced by the NMMB/BSC-Dust model in the simulations. The methodology described for the dust model evaluation against the continuous P-MPL observations can be easily adopted for an operational use of the NMMB/BSC-Dust model for forecasting the mass concentration profiling in frequently dust-affected regions with serious climate and environmental implications, as long as a typical MEE for dust could be accurately specified. Hence, a statistical analysis for determining AERONET-based MEE values over the Iberian Peninsula is on-going.
|
|