1. |
- A. da Cruz, Márcia G., et al.
(author)
-
Solvent-free synthesis of photoluminescent carbon nanoparticles from lignin-derived monomers as feedstock
- 2023
-
In: Green Chemistry Letters and Reviews. - 1751-8253 .- 1751-7192. ; 16:1
-
Journal article (peer-reviewed)abstract
- Photoluminescent carbon nanoparticles (CNPs), such as carbon dots (CDs), have attracted much attention owing to a unique set of properties, like high and tunable fluorescence. In this way, the use of carbon-rich lignin has been demonstrated to be a sustainable approach to producing a broad range of photoluminescent CNPs. However, the valorization of this complex polyphenol is limited when it comes to green and efficient ways of conversion. In addition, the existing solvothermal approaches using lignin often result in CDs with low photoluminescence, while flammable and/or toxic solvents are employed. Here, we depolymerized technical lignins, i.e. kraft and soda, through electroreductive cleavage in two different sustainable media: deep eutectic solvent and levulinic acid. After depolymerization, lignin-derived monomers were generated, with a predominance of aryl ether and phenolic groups, which were further combined with 1,2-Phenylenediamine to produce N-doped CNPs in a solvent-free approach. Photoluminescent CNPs with varied sizes were generated (5–50 nm), which presented a wide photoluminescence emission, from blue to red, depending on solvent polarity. These results demonstrate a feasible and sustainable route for the solvent-free synthesis of photoluminescent CNPs using lignin-derived monomers as carbon source, which may find applications in a wide range of fields.
|
|
2. |
- A, Lavanya, et al.
(author)
-
Smart energy monitoring and power quality performance based evaluation of 100-kW grid tied PV system
- 2023
-
In: Heliyon. - 2405-8440. ; 9:6
-
Journal article (peer-reviewed)abstract
- Globally, the demand for energy from renewable sources is growing due to the increasing electricity consumption and the pollution of fossil fuels. The government has framed various policies to facilitate green energy generation, encouraging renewable energy source usage through PV installations in multiple sectors, including educational institutions. The primary objective of this paper is to propose a methodological approach for analysing the performance of the installed PV system on the rooftop of a university building in Tamil Nadu, India. The site selected is favourable for electricity generation from PV systems with an average global solar radiation of 5.82 kWh/m2day. Solar energy changes periodically with annual and daily variations and is not steady due to seasonal changes. The step-by-step performance assessment and the annual performance of the 100-kW solar PV system, which was instituted in 2019, with the forecasted parameters, are presented in this paper. Therefore, the assessment analysis is carried out in four phases: feasibility assessment, Energy yield assessment, Life cycle assessment, and Power quality assessment. To improve the solar PV output and efficiency, considering the solar irradiation, temperature, wind velocity, etc., PV yield is measured to evaluate the PV system's energy metrics. This paper also considers the carbon credits earned, solar power generated in the location, and the payback period. The power quality assessment is carried out in this paper to test the PV plant's compliance with effective grid integration.
|
|
3. |
|
|
4. |
|
|
5. |
- Aabel, EW, et al.
(author)
-
Ventricular arrhythmias in arrhythmic mitral valve syndrome-a prospective continuous long-term cardiac monitoring study
- 2023
-
In: Europace : European pacing, arrhythmias, and cardiac electrophysiology : journal of the working groups on cardiac pacing, arrhythmias, and cardiac cellular electrophysiology of the European Society of Cardiology. - : Oxford University Press (OUP). - 1532-2092. ; 25:2, s. 506-516
-
Journal article (peer-reviewed)abstract
- AimsArrhythmic mitral valve syndrome is linked to life-threatening ventricular arrhythmias. The incidence, morphology and methods for risk stratification are not well known. This prospective study aimed to describe the incidence and the morphology of ventricular arrhythmia and propose risk stratification in patients with arrhythmic mitral valve syndrome.MethodsArrhythmic mitral valve syndrome patients were monitored for ventricular tachyarrhythmias by implantable loop recorders (ILR) and secondary preventive implantable cardioverter-defibrillators (ICD). Severe ventricular arrhythmias included ventricular fibrillation, appropriate or aborted ICD therapy, sustained ventricular tachycardia and non-sustained ventricular tachycardia with symptoms of hemodynamic instability.ResultsDuring 3.1 years of follow-up, severe ventricular arrhythmia was recorded in seven (12%) of 60 patients implanted with ILR [first event incidence rate 4% per person-year, 95% confidence interval (CI) 2–9] and in four (20%) of 20 patients with ICD (re-event incidence rate 8% per person-year, 95% CI 3–21). In the ILR group, severe ventricular arrhythmia was associated with frequent premature ventricular complexes, more non-sustained ventricular tachycardias, greater left ventricular diameter and greater posterolateral mitral annular disjunction distance (all P < 0.02).ConclusionsThe yearly incidence of ventricular arrhythmia was high in arrhythmic mitral valve syndrome patients without previous severe arrhythmias using continuous heart rhythm monitoring. The incidence was even higher in patients with secondary preventive ICD. Frequent premature ventricular complexes, non-sustained ventricular tachycardias, greater left ventricular diameter and greater posterolateral mitral annular disjunction distance were predictors of first severe arrhythmic event.
|
|
6. |
- Aad, G., et al.
(author)
-
A search for heavy Higgs bosons decaying into vector bosons in same-sign two-lepton final states in pp collisions at √s=13 TeV with the ATLAS detector
- 2023
-
In: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479. ; 2023:7
-
Journal article (peer-reviewed)abstract
- A search for heavy Higgs bosons produced in association with a vector boson and decaying into a pair of vector bosons is performed in final states with two leptons (electrons or muons) of the same electric charge, missing transverse momentum and jets. A data sample of proton–proton collisions at a centre-of-mass energy of 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018 is used. The data correspond to a total integrated luminosity of 139 fb−1. The observed data are in agreement with Standard Model background expectations. The results are interpreted using higher-dimensional operators in an effective field theory. Upper limits on the production cross-section are calculated at 95% confidence level as a function of the heavy Higgs boson’s mass and coupling strengths to vector bosons. Limits are set in the Higgs boson mass range from 300 to 1500 GeV, and depend on the assumed couplings. The highest excluded mass for a heavy Higgs boson with the coupling combinations explored is 900 GeV. Limits on coupling strengths are also provided.
|
|
7. |
- Aad, G., et al.
(author)
-
Anomaly detection search for new resonances decaying into a Higgs boson and a generic new particle X in hadronic final states using √s=13 TeV pp collisions with the ATLAS detector
- 2023
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 108:5
-
Journal article (peer-reviewed)abstract
- A search is presented for a heavy resonance Y decaying into a Standard Model Higgs boson H and a new particle X in a fully hadronic final state. The full Large Hadron Collider run 2 dataset of proton-proton collisions at √s=13 TeV collected by the ATLAS detector from 2015 to 2018 is used and corresponds to an integrated luminosity of 139 fb−1. The search targets the high Y-mass region, where the H and X have a significant Lorentz boost in the laboratory frame. A novel application of anomaly detection is used to define a general signal region, where events are selected solely because of their incompatibility with a learned background-only model. It is constructed using a jet-level tagger for signal-model-independent selection of the boosted X particle, representing the first application of fully unsupervised machine learning to an ATLAS analysis. Two additional signal regions are implemented to target a benchmark X decay into two quarks, covering topologies where the X is reconstructed as either a single large-radius jet or two small-radius jets. The analysis selects Higgs boson decays into , and a dedicated neural-network-based tagger provides sensitivity to the boosted heavy-flavor topology. No significant excess of data over the expected background is observed, and the results are presented as upper limits on the production cross section for signals with mY between 1.5 and 6 TeV and mX between 65 and 3000 GeV.
|
|
8. |
- Aad, G., et al.
(author)
-
ATLAS flavour-tagging algorithms for the LHC Run 2 pp collision dataset
- 2023
-
In: European Physical Journal C. - : Institute for Ionics. - 1434-6044 .- 1434-6052. ; 83:7
-
Journal article (peer-reviewed)abstract
- The flavour-tagging algorithms developed by the ATLAS Collaboration and used to analyse its dataset of √s=13 TeV pp collisions from Run 2 of the Large Hadron Collider are presented. These new tagging algorithms are based on recurrent and deep neural networks, and their performance is evaluated in simulated collision events. These developments yield considerable improvements over previous jet-flavour identification strategies. At the 77% b-jet identification efficiency operating point, light-jet (charm-jet) rejection factors of 170 (5) are achieved in a sample of simulated Standard Model events; similarly, at a c-jet identification efficiency of 30%, a light-jet (b-jet) rejection factor of 70 (9) is obtained.
|
|
9. |
- Aad, G., et al.
(author)
-
Calibration of the light-flavour jet mistagging efficiency of the b-tagging algorithms with Z+jets events using 139 fb−1 of ATLAS proton–proton collision data at √s=13 TeV
- 2023
-
In: European Physical Journal C. - : Institute for Ionics. - 1434-6044 .- 1434-6052. ; 83:8
-
Journal article (peer-reviewed)abstract
- The identification of b-jets, referred to as b-tagging, is an important part of many physics analyses in the ATLAS experiment at the Large Hadron Collider and an accurate calibration of its performance is essential for high-quality physics results. This publication describes the calibration of the light-flavour jet mistagging efficiency in a data sample of proton–proton collision events at √s=13 TeV corresponding to an integrated luminosity of 139 fb−1. The calibration is performed in a sample of Z bosons produced in association with jets. Due to the low mistagging efficiency for light-flavour jets, a method which uses modified versions of the b-tagging algorithms referred to as flip taggers is used in this work. A fit to the jet-flavour-sensitive secondary-vertex mass is performed to extract a scale factor from data, to correct the light-flavour jet mistagging efficiency in Monte Carlo simulations, while simultaneously correcting the b-jet efficiency. With this procedure, uncertainties coming from the modeling of jets from heavy-flavour hadrons are considerably lower than in previous calibrations of the mistagging scale factors, where they were dominant. The scale factors obtained in this calibration are consistent with unity within uncertainties.
|
|
10. |
- Aad, G., et al.
(author)
-
Combination of inclusive top-quark pair production cross-section measurements using ATLAS and CMS data at √s=7 and 8 TeV
- 2023
-
In: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479. ; 2023:7
-
Journal article (peer-reviewed)abstract
- A combination of measurements of the inclusive top-quark pair production cross-section performed by ATLAS and CMS in proton–proton collisions at centre-of-mass energies of 7 and 8 TeV at the LHC is presented. The cross-sections are obtained using top-quark pair decays with an opposite-charge electron–muon pair in the final state and with data corresponding to an integrated luminosity of about 5 fb−1 at √s = 7 TeV and about 20 fb−1 at √s = 8 TeV for each experiment. The combined cross-sections are determined to be 178.5 ± 4.7 pb at √s = 7 TeV and pb at √s = 8 TeV with a correlation of 0.41, using a reference top-quark mass value of 172.5 GeV. The ratio of the combined cross-sections is determined to be R8/7 = 1.363 ± 0.032. The combined measured cross-sections and their ratio agree well with theory calculations using several parton distribution function (PDF) sets. The values of the top-quark pole mass (with the strong coupling fixed at 0.118) and the strong coupling (with the top-quark pole mass fixed at 172.5 GeV) are extracted from the combined results by fitting a next-to-next-to-leading-order plus next-to-next-to-leading-log QCD prediction to the measurements. Using a version of the NNPDF3.1 PDF set containing no top-quark measurements, the results obtained are = GeV and αs(mZ)=.
|
|