1. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
|
|
3. |
|
|
4. |
- Davies, Stuart J., et al.
(author)
-
ForestGEO: Understanding forest diversity and dynamics through a global observatory network
- 2021
-
In: Biological Conservation. - : Elsevier BV. - 0006-3207. ; 253
-
Journal article (peer-reviewed)abstract
- ForestGEO is a network of scientists and long-term forest dynamics plots (FDPs) spanning the Earth's major forest types. ForestGEO's mission is to advance understanding of the diversity and dynamics of forests and to strengthen global capacity for forest science research. ForestGEO is unique among forest plot networks in its large-scale plot dimensions, censusing of all stems ≥1 cm in diameter, inclusion of tropical, temperate and boreal forests, and investigation of additional biotic (e.g., arthropods) and abiotic (e.g., soils) drivers, which together provide a holistic view of forest functioning. The 71 FDPs in 27 countries include approximately 7.33 million living trees and about 12,000 species, representing 20% of the world's known tree diversity. With >1300 published papers, ForestGEO researchers have made significant contributions in two fundamental areas: species coexistence and diversity, and ecosystem functioning. Specifically, defining the major biotic and abiotic controls on the distribution and coexistence of species and functional types and on variation in species' demography has led to improved understanding of how the multiple dimensions of forest diversity are structured across space and time and how this diversity relates to the processes controlling the role of forests in the Earth system. Nevertheless, knowledge gaps remain that impede our ability to predict how forest diversity and function will respond to climate change and other stressors. Meeting these global research challenges requires major advances in standardizing taxonomy of tropical species, resolving the main drivers of forest dynamics, and integrating plot-based ground and remote sensing observations to scale up estimates of forest diversity and function, coupled with improved predictive models. However, they cannot be met without greater financial commitment to sustain the long-term research of ForestGEO and other forest plot networks, greatly expanded scientific capacity across the world's forested nations, and increased collaboration and integration among research networks and disciplines addressing forest science.
|
|
5. |
- Fang, Aoqi, et al.
(author)
-
Advancements in Micro-LED Performance through Nanomaterials and Nanostructures: A Review
- 2024
-
In: Nanomaterials. - 2079-4991. ; 14:11
-
Research review (peer-reviewed)abstract
- Micro-light-emitting diodes (μLEDs), with their advantages of high response speed, long lifespan, high brightness, and reliability, are widely regarded as the core of next-generation display technology. However, due to issues such as high manufacturing costs and low external quantum efficiency (EQE), μLEDs have not yet been truly commercialized. Additionally, the color conversion efficiency (CCE) of quantum dot (QD)-μLEDs is also a major obstacle to its practical application in the display industry. In this review, we systematically summarize the recent applications of nanomaterials and nanostructures in μLEDs and discuss the practical effects of these methods on enhancing the luminous efficiency of μLEDs and the color conversion efficiency of QD-μLEDs. Finally, the challenges and future prospects for the commercialization of μLEDs are proposed.
|
|
6. |
- Fang, Aoqi, et al.
(author)
-
High Color Conversion Efficiency Realized in Graphene-Connected Nanorod Micro-LEDs Using Hybrid Ag Nanoparticles and Quantum Dots
- 2024
-
In: Advanced Optical Materials. - 2195-1071. ; 12:19
-
Journal article (peer-reviewed)abstract
- In this paper, a uniform nanorod (NR) array is etched onto the surface of Micro-Light-Emitting-Diodes (µLEDs) and mix Ag nanoparticles (NPs) with QDs to fill the gaps between the nanorods. Simultaneously, the study utilizes graphene to connect individual nanorods and enhance current spreading. The nanorod array's structure significantly reduces the distance between the QDs and the quantum well (QW), reducing energy loss from the excitation light source through a non-radiative energy transfer (NRET) mechanism. Additionally, the Ag NPs function as localized surface plasmons (LSPs), further enhancing the CCE of QDs via the absorption resonance. In this study, the effects of two types of Ag NPs are compared with different absorption resonance peaks on device performance. The results demonstrate that Ag NPs with absorption resonance peaks matching the emission wavelength of QDs play a more crucial role in the system. This configuration achieves a CCE of 77.78% for µLEDs with nanorod arrays, operating at a current of 10 mA. Compared to the conventional µLED structure with QDs only on the surface, the proposed method improves the CCE of µLEDs by an impressive 86.5%. This outcome underscores the significant contribution of the NR structure and LSPs in enhancing the CCE of QD-µLEDs.
|
|
7. |
- Fang, Aoqi, et al.
(author)
-
Localized surface plasmon-enhanced nanorod micro-LEDs with Ag nanoparticles embedded in insulating and planarizing spin-on glass
- 2024
-
In: Applied Physics Letters. - 0003-6951 .- 1077-3118. ; 125:2
-
Journal article (peer-reviewed)abstract
- To enhance the emission of GaN-based Micro-LEDs (μLEDs), we etched uniform nanorods (NRs) on the μLED surface and filled the nanorod gaps with spin-on glass (SOG) containing mixed Ag nanoparticles (NPs). The nanorod structure creates a conducive environment for close interaction between Ag NPs and quantum wells (QWs), facilitating the coupling of Ag NPs as localized surface plasmons (LSPs) with the QWs to enhance light emission. The SOG acts as an insulating layer between Ag NPs and NRs, preventing electron leakage, while also serving as a planarization material for the nanorod structure. This configuration allows for the fabrication of a planar Indium Tin Oxide layer without short-circuiting the nanorod structure. Compared to traditional planar Micro-LEDs, NR-μLEDs with SOG-encased Ag NPs exhibit a 50% increase in electroluminescence (EL) intensity and a 56% increase in photoluminescence (PL) intensity. This work paves the way for broader applications of LSP in μLEDs.
|
|
8. |
- Fenstermacher, M.E., et al.
(author)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Journal article (peer-reviewed)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
9. |
- Ablikim, M., et al.
(author)
-
Amplitude analysis of D0 → K -π+π+π-
- 2017
-
In: Physical Review D. - 2470-0010 .- 2470-0029. ; 95:7
-
Journal article (peer-reviewed)abstract
- We present an amplitude analysis of the decay D0 → K -π+π+π- based on a data sample of 2.93 fb−1 acquired by the BESIII detector at the ψ(3770) resonance. With a nearly background free sample of about 16000 events, we investigate the substructure of the decay and determine the relative fractions and the phases among the different intermediate processes. Our amplitude model includes the two-body decays D0 → ¯K*0ρ0, D0 → K−a+1(1260) and D0 → K−1(1270)π+, the three-body decays D0 →¯K*0π+π− and D0 → K−π+ρ0, as well as the four-body nonresonant decay D0 → K−π+π+π−. The dominant intermediate process is D0 → K−a+1(1260), accounting for a fit fraction of 54.6%.
|
|
10. |
- Ablikim, M., et al.
(author)
-
Amplitude analysis of the chi(c1) -> eta pi(+)pi(-) decays
- 2017
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 95:3
-
Journal article (peer-reviewed)abstract
- Using 448.0 x 10(6) psi(3686) events collected with the BESIII detector, an amplitude analysis is performed for psi(3686) -> gamma chi(c1), chi(c1) ->eta pi(+)pi(-) decays. The most dominant two- body structure observed is a(0)(980)(+/-) pi(-/+); a(0)(980)(+/-) -> eta pi(+/-.) line shape is modeled using a dispersion relation, and a significant nonzero a(0) (980) coupling to the eta'pi channel is measured. We observe chi(c1) -> a(2)(1700)pi production for the first time, with a significance larger than 17 sigma. The production of mesons with exotic quantum numbers, J(PC) = 1(-+), is investigated, and upper limits for the branching fractions chi(c1) -> pi(1)(1400)(+/-)pi(-/+) , chi(c1) -> pi(1)(1600)(+/-)pi(-/+) and chi(c1) -> pi 1(2015)(+/-)pi(-/+) with subsequent pi(1)(X)(+/-) -> eta pi(+/-) decay, are determined.
|
|