1. |
- Bykov, Maxim, et al.
(author)
-
High-Pressure Synthesis of a Nitrogen-Rich Inclusion Compound ReN8·xN2 with Conjugated Polymeric Nitrogen Chains
- 2018
-
In: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 57:29, s. 9048-9053
-
Journal article (peer-reviewed)abstract
- A nitrogen-rich compound, ReN(8)xN(2), was synthesized by a direct reaction between rhenium and nitrogen at high pressure and high temperature in a laser-heated diamond anvil cell. Single-crystal X-ray diffraction revealed that the crystal structure, which is based on the ReN8 framework, has rectangular-shaped channels that accommodate nitrogen molecules. Thus, despite a very high synthesis pressure, exceeding 100GPa, ReN(8)xN(2) is an inclusion compound. The amount of trapped nitrogen (x) depends on the synthesis conditions. The polydiazenediyl chains [-N=N-] that constitute the framework have not been previously observed in any compound. Abinitio calculations on ReN(8)xN(2) provide strong support for the experimental results and conclusions.
|
|
2. |
- Bykov, Maxim, et al.
(author)
-
High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re-2(N-2)(N)(2) stable at ambient conditions
- 2019
-
In: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Journal article (peer-reviewed)abstract
- High-pressure synthesis in diamond anvil cells can yield unique compounds with advanced properties, but often they are either unrecoverable at ambient conditions or produced in quantity insufficient for properties characterization. Here we report the synthesis of metallic, ultraincompressible (K-0 = 428(10) GPa), and very hard (nanoindentation hardness 36.7(8) GPa) rhenium nitride pernitride Re-2(N-2)(N)(2). Unlike known transition metals pernitrides Re-2(N-2)(N)(2) contains both pernitride N-2(4-) and discrete N3- anions, which explains its exceptional properties. Re-2(N-2)(N)(2) can be obtained via a reaction between rhenium and nitrogen in a diamond anvil cell at pressures from 40 to 90 GPa and is recoverable at ambient conditions. We develop a route to scale up its synthesis through a reaction between rhenium and ammonium azide, NH4N3, in a large-volume press at 33 GPa. Although metallic bonding is typically seen incompatible with intrinsic hardness, Re-2(N-2)(N)(2) turned to be at a threshold for superhard materials.
|
|
3. |
- Greenberg, Eran, et al.
(author)
-
Pressure-Induced Site-Selective Mott Insulator-Metal Transition in Fe2O3
- 2018
-
In: Physical Review X. - : AMER PHYSICAL SOC. - 2160-3308. ; 8:3
-
Journal article (peer-reviewed)abstract
- We provide experimental and theoretical evidence for a pressure-induced Mott insulator-metal transition in Fe2O3 characterized by site-selective delocalization of the electrons. Density functional plus dynamical mean field theory (DFT + DMFT) calculations, along with Mossbauer spectroscopy, x-ray diffraction, and electrical transport measurements on Fe2O3 up to 100 GPa, reveal this site-selective Mott transition between 50 and 68 GPa, such that the metallization can be described by ((FE3+HS)-F-VI)(2)O-3 [R (3) over barc structure]-amp;gt;(50) (GPa) (Fe-VIII(3+HS) Fe-VI(M))O-3 [P2(1)/n structure]-amp;gt;(68 Gpa)(Fe-VI(M))(2)O-3[Aba2/PPv structure]. Within the P2(1)/n crystal structure, characterized by two distinct coordination sites (VI and VIII), we observe equal abundances of ferric ions (Fe3+) and ions having delocalized electrons (Fe-M), and only at higher pressures is a fully metallic high-pressure structure obtained, all at room temperature. Thereby, the transition is characterized by delocalization/metallization of the 3d electrons on half the Fe sites, with a site-dependent collapse of local moments. Above approximately 50 GPa, Fe2O3 is a strongly correlated metal with reduced electron mobility (large band renormalizations) of m*/m similar to 4 and 6 near the Fermi level. Importantly, upon decompression, we observe a site-selective (metallic) to conventional Mott insulator phase transition (Fe-VIII(3+HS) Fe-VI(M))O-3 -amp;gt;(50) (GPa)(Fe-VIII(3+HS) Fe-VI(3+HS))O-3 within the same P2(1)/n structure, indicating a decoupling of the electronic and lattice degrees of freedom. Our results offer a model for understanding insulator-metal transitions in correlated electron materials, showing that the interplay of electronic correlations and crystal structure may result in rather complex behavior of the electronic and magnetic states of such compounds.
|
|
4. |
- Jönsson, Johan, et al.
(author)
-
Inverse pressure-induced Mott transition in TiPO4
- 2019
-
In: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 99:24
-
Journal article (peer-reviewed)abstract
- TiPO4 shows interesting structural and magnetic properties as temperature and pressure are varied, such as a spin-Peierls phase transition and the development of incommensurate modulations of the lattice. Recently, high-pressure experiments for TiPO4 reported two structural phases appearing at high pressures, the so-called phases IV and V [M. Bykov et al., Angew. Chem. Int. Ed. 55, 15053 (2016).]. The latter was shown to include the first example of fivefold O-coordinated P atoms in an inorganic phosphate compound. In this work, we characterize the electronic structure and other physical properties of these phases by means of ab initio calculations and investigate the structural transition. We find that the appearance of phases IV and V coincides with a collapse of the Mott insulating gap and quenching of magnetism in phase III as pressure is applied. Remarkably, our calculations show that in the high-pressure phase V, these features reappear, leading to an antiferromagnetic Mott insulating phase, with robust local moments.
|
|
5. |
- Kudryavtsev, Daniil, et al.
(author)
-
Raman and IR Spectroscopy Studies on Propane at Pressures of Up to 40 GPa
- 2017
-
In: Journal of Physical Chemistry A. - : AMER CHEMICAL SOC. - 1089-5639 .- 1520-5215. ; 121:32, s. 6004-6011
-
Journal article (peer-reviewed)abstract
- Raman and IR spectroscopy studies on propane were performed at pressures of up to 40 GPa at ambient temperatures using the diamond anvil cell technique. Propane undergoes three phase transitions at 6.4(5), 14.5(5), and 26.5(5) GPa in Raman spectroscopy and at 7.0(5), 14.0(5), and 27.0(5) GPa in IR spectroscopy. The phase transitions were identified using the Raman and IR splitting modes and the appearance or disappearance of peaks, which clearly corresponded to the changes in the frequencies of the modes as the pressure changed. Our results demonstrate the complex high-pressure behavior of solid propane.
|
|
6. |
- Kudryavtsev, Daniil, et al.
(author)
-
Raman high-pressure study of butane isomers up to 40 GPa
- 2018
-
In: AIP Advances. - : American Institute of Physics (AIP). - 2158-3226. ; 8:11
-
Journal article (peer-reviewed)abstract
- Raman spectroscopy studies on n and i-butane were performed at pressures of up to 40 GPa at ambient temperatures using the DAC technique. Normal butane undergoes two phase transitions at 1.9(5) GPa and 2.9(5) GPa and isobutane at 2.7(5) GPa and 3.5(5) GPa. These phase transitions were identified based on observations of the splitting Raman modes and the appearance or disappearance of particular Raman peaks. Our results demonstrate the complex, high-pressure behavior of butane isomers.
|
|
7. |
- Laniel, Dominique, et al.
(author)
-
High Pressure Investigation of the S-N-2 System up to the Megabar Range: Synthesis and Characterization of the SN2 Solid
- 2019
-
In: Inorganic Chemistry. - : AMER CHEMICAL SOC. - 0020-1669 .- 1520-510X. ; 58:14, s. 9195-9204
-
Journal article (peer-reviewed)abstract
- Sulfur and nitrogen represent one of the most studied inorganic binary systems at ambient pressure on account of their large wealth of metastable exotic ring-like compounds. Under high pressure conditions, however, their behavior is unknown. Here, sulfur and nitrogen were compressed in a diamond anvil cell up to about 120 GPa and laser-heated at regular pressure intervals in an attempt to stabilize novel sulfur nitrogen compounds. Above 64 GPa, an orthorhombic (space group Pnnm) SN2 compound was synthesized and characterized by single-crystal and powder X-ray diffraction as well as Raman spectroscopy. It is shown to adopt a CaCl2-type structure hence it is isostructural, isomassic, and isoelectronic to CaCl2-type SiO2 comprised of SN6 octahedra. Complementary theoretical calculations were performed to provide further insight into the physicochemical properties of SN2, notably its equation of state, the bonding type between its constitutive elements, and its electronic density of states. This new solid is shown to be metastable down to about 20 GPa, after which it spontaneously decomposes into S and N-2. This investigation shows that despite the many metastable S N compounds existing at ambient conditions, none of them are formed by pressure.
|
|
8. |
- Pakhomova, Anna, et al.
(author)
-
Penta- and hexa-coordinated beryllium and phosphorus in high-pressure modifications of CaBe2P2O8
- 2019
-
In: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Journal article (peer-reviewed)abstract
- Beryllium oxides have been extensively studied due to their unique chemical properties and important technological applications. Typically, in inorganic compounds beryllium is tetrahedrally coordinated by oxygen atoms. Herein based on results of in situ single crystal X-ray diffraction studies and ab initio calculations we report on the high-pressure behavior of CaBe2P2O8, to the best of our knowledge the first compound showing a step-wise transition of Be coordination from tetrahedral (4) to octahedral (6) through trigonal bipyramidal (5). It is remarkable that the same transformation route is observed for phosphorus. Our theoretical analysis suggests that the sequence of structural transitions of CaBe2P2O8 is associated with the electronic transformation from predominantly molecular orbitals at low pressure to the state with overlapping electronic clouds of anions orbitals.
|
|
9. |
- Raza, Zamaan, et al.
(author)
-
First-principles calculations of properties of orthorhombic iron carbide Fe7C3 at the Earths core conditions
- 2015
-
In: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 91:21
-
Journal article (peer-reviewed)abstract
- A recently discovered phase of orthorhombic iron carbide o-Fe7C3 [Prescher et al., Nat. Geosci. 8, 220 (2015)] is assessed as a potentially important phase for interpretation of the properties of the Earths core. In this paper, we carry out first-principles calculations on o-Fe7C3, finding properties to be in broad agreement with recent experiments, including a high Poissons ratio (0.38). Our enthalpy calculations suggest that o-Fe7C3 is more stable than Eckstrom-Adcock hexagonal iron carbide (h-Fe7C3) below approximately 100 GPa. However, at 150 GPa, the two phases are essentially degenerate in terms of Gibbs free energy, and further increasing the pressure towards Earths core conditions stabilizes h-Fe7C3 with respect to the orthorhombic phase. Increasing the temperature tends to stabilize the hexagonal phase at 360 GPa, but this trend may change beyond the limit of the quasiharmonic approximation.
|
|
10. |
- Serovaiskii, Aleksandr, et al.
(author)
-
Fate of Hydrocarbons in Iron-Bearing Mineral Environments during Subduction
- 2019
-
In: Minerals. - : MDPI. - 2075-163X. ; 9:11
-
Journal article (peer-reviewed)abstract
- Subducted sediments play a key role in the evolution of the continental crust and upper mantle. As part of the deep carbon cycle, hydrocarbons are accumulated in sediments of subduction zones and could eventually be transported with the slab below the crust, thus affecting processes in the deep Earth's interior. However, the behavior of hydrocarbons during subduction is poorly understood. We experimentally investigated the chemical interaction of model hydrocarbon mixtures or natural oil with ferrous iron-bearing silicates and oxides (representing possible rock-forming materials) at pressure-temperature conditions of the Earth's lower crust and upper mantle (up to 2000(+/- 100) K and 10(+/- 0.2) GPa), and characterized the run products using Raman and Mossbauer spectroscopies and X-ray diffraction. Our results demonstrate that complex hydrocarbons are stable on their own at thermobaric conditions corresponding to depths exceeding 50 km. We also found that chemical reactions between hydrocarbons and ferrous iron-bearing rocks during slab subduction lead to the formation of iron hydride and iron carbide. Iron hydride with relatively low melting temperature may form a liquid with negative buoyancy that could transport reduced iron and hydrogen to greater depths.
|
|