1. |
- Bogan, Michael J., et al.
(author)
-
Aerosol Imaging with a Soft X-Ray Free Electron Laser
- 2010
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 44:3, s. I-VI
-
Journal article (peer-reviewed)abstract
- Lasers have long played a critical role in the advancement of aerosol science. A new regime of ultrafast laser technology has recently be realized, the world's first soft x-ray free electron laser. The Free electron LASer in Hamburg, FLASH, user facility produces a steady source of 10 femtosecond pulses of 7–32 nm x-rays with 1012 photons per pulse. The high brightness, short wavelength, and high repetition rate (> 500 pulses per second) of this laser offers unique capabilities for aerosol characterization. Here we use FLASH to perform the highest resolution imaging of single PM2.5 aerosol particles in flight to date. We resolve to 35 nm the morphology of fibrous and aggregated spherical carbonaceous nanoparticles that existed for less than two milliseconds in vacuum. Our result opens the possibility for high spatial- and time-resolved single particle aerosol dynamics studies, filling a critical technological need in aerosol science.
|
|
2. |
- Högberg, Sofie, et al.
(author)
-
Respiratory deposition of fibers in the non-inertial regime : development and application of a semi-analytical model
- 2010
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 44:10, s. 847-860
-
Journal article (peer-reviewed)abstract
- A semi-analytical model describing the motion of fibrous particles ranging from nano- to micro scale was developed, and some important differences in respiratory tract transport and deposition between fibrous particles of various sizes and shapes were elucidated. The aim of this work was to gain information regarding health risks associated with inhalation exposure to small fibers such as carbon nanotubes. The model, however, is general in the sense that it can be applied to arbitrary flows and geometries at small fiber Stokes and Reynolds numbers. Deposition due to gravitational settling, Brownian motion and interception was considered, and results were presented for steady, laminar, fully developed parabolic flow in straight airways. Regarding particle size, our model shows that decrease in particle size leads to reduced efficiency of sedimentation but increased intensity of Brownian diffusion, as expected. We studied the effects due to particle shape alone by varying the aspect ratios and diameters of the microfibers simultaneously, such that the effect of particle mass does not come into play. Our model suggests that deposition both due to gravitational settling and Brownian diffusion decreases with increased fiber aspect ratio. Regarding the combined effect of fiber size and shape, our results suggest that for particles with elongated shape the probability of reaching the vulnerable gas-exchange region in the deep lung is highest for particles with diameters in the size range 10-100 nm and lengths of several micrometers. Note that the popular multi-walled carbon nanotubes fall into this size-range
|
|
3. |
- Isaxon, Christina, et al.
(author)
-
A Novel System for Source Characterization and Controlled Human Exposure to Nanoparticle Aggregates Generated During Gas–Metal Arc Welding
- 2013
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 1521-7388 .- 0278-6826. ; 47:1, s. 52-59
-
Journal article (peer-reviewed)abstract
- Abstract in Undetermined The aim of this study was to achieve a method to perform detailed characterization and human exposure studies of nanosized and nanostructured aerosol particles. The source chosen was mild steel, active gas, arc welding fume. The setup consisted of a generation chamber, where welding can be performed, connected to an airtight stainless steel 22 m(3) exposure chamber. Instrumentation, consisting of a tapered element oscillating microbalance, a scanning mobility particle sizer, and a sampler for electron microscopy and particle-induced X-ray emission analysis was connected to the stainless steel chamber. The feasibility of the system for human exposure studies was evaluated by exposing 31 human volunteers, in groups of three, to a test aerosol containing 1 mg/m(3) welding fumes and to conditioned, filtered air. The results show that an aerosol that accurately represents dilute welding fume exposures that occur in workplaces can be produced in a controlled manner, and that the experimental setup can be used for 6 h, double-blind, exposures of human subjects. Particle mass concentration levels could be varied from <5 mu g/m(3) to more than 1000 mu g/m(3). Fumes from metal active gas welding showed a unimodal size distribution with a mean mobility diameter of 160 nm, transmission electron microscopy showed aggregates with a clearly nanosized structure.
|
|
4. |
- Leck, Caroline, et al.
(author)
-
New Particle Formation of Marine Biological Origin
- 2010
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 44:7, s. 570-577
-
Journal article (peer-reviewed)abstract
- Large increases in concentration of particles smaller than 20 nm diameter are relatively common over the central Arctic Ocean in summer and have occasionally been observed over lower latitude oceans. These events often do not readily fit theoretical models of homogeneous nucleation from known precursor gases. It is shown that aggregates and gels of marine biological origin are often common over remote oceans and have a partially granular structure. Previous work in the central Arctic Ocean in summer has shown evidence of release of particles of the order of 40 nm diameter in the presence of evaporating fogs. It is suggested here that under some circumstances disintegration of the primary particles may be more complete, releasing particles smaller than 5 nm that would then be mistaken for recently nucleated particles. Examination of particles present during an apparent nucleation event at Cape Grim, Tasmania supports this interpretation. Correlation coefficients of concentrations of particles of different sizes during the period before apparent nucleation events suggests a distinct difference between vigorous true nucleation events and those over the central Arctic Ocean in summer where little subsequent growth is observed.
|
|
5. |
- Malik, Azhar, et al.
(author)
-
A Potential Soot Mass Determination Method from Resistivity Measurement of Thermophoretically Deposited Soot
- 2011
-
In: AEROSOL SCIENCE AND TECHNOLOGY. - : Taylor and Francis. - 0278-6826 .- 1521-7388. ; 45:2, s. 284-294
-
Journal article (peer-reviewed)abstract
- Miniaturized detection systems for nanometer-sized airborne particles are in demand, for example in applications for onboard diagnostics downstream particulate filters in modern diesel engines. A soot sensor based on resistivity measurements was developed and characterized. This involved generation of soot particles using a quenched co-flow diffusion flame; depositing the particles onto a sensor substrate using thermophoresis and particle detection using a finger electrode structure, patterned on thermally oxidized silicon substrate. The generated soot particles were characterized using techniques including Scanning Mobility Particle Sizer for mobility size distributions, Differential Mobility Analyzer-Aerosol Particle Mass analyzer for the mass-mobility relationship, and Transmission Electron Microscopy for morphology. The generated particles were similar to particles from diesel engines in concentration, mobility size distribution, and mass fractal dimension. The primary particle size, effective density and organic mass fraction were slightly lower than values reported for diesel engines. The response measured with the sensors was largely dependent on particle mass concentration, but increased with increasing soot aggregate mobility size. Detection down to cumulative mass as small as 20-30 mu g has been demonstrated. The detection limit can be improved by using a more sensitive resistance meter, modified deposition cell, larger flow rates of soot aerosol and modifying the sensor surface.
|
|
6. |
- Meuller, Bengt, et al.
(author)
-
Review of Spark Discharge Generators for Production of Nanoparticle Aerosols
- 2012
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 1521-7388 .- 0278-6826. ; 46:11, s. 1256-1270
-
Research review (peer-reviewed)abstract
- In the growing field of nanotechnology there is an increasing need to develop production methods for nanoparticles, especially methods that provide control and reproducibility. The spark discharge generator (SDG) is a versatile device for the production of nanoparticle aerosols. It can produce aerosol nanoparticles in the entire nanometer range (1-100 nm), and beyond. Depending on requirements, and the system used, these nanoparticles can be completely contamination free and composed of one or more materials. This provides a unique opportunity to create new materials on the nanoscale. Already in use in semiconductor, materials, health and environmental research, the SDG shows promise for yet more applications. If needed, particle production by the SDG could be scaled up using parallel generators facilitating continuous high-volume production of aerosol nanoparticles. Still, there is a surprisingly low knowledge of fundamental processes in the SDG. In this article we present a thorough review of the most common and relevant SDGs and the theory of their operation. Some possible improvements are also discussed.
|
|
7. |
|
|
8. |
- Rissler, Jenny, et al.
(author)
-
Effective Density Characterization of Soot Agglomerates from Various Sources and Comparison to Aggregation Theory
- 2013
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 1521-7388 .- 0278-6826. ; 47:7, s. 792-805
-
Journal article (peer-reviewed)abstract
- Soot particle (black carbon) morphology is of dual interest, both from a health perspective and due to the influence of soot on the global climate. In this study, the mass-mobility relationships, and thus effective densities, of soot agglomerates from three types of soot emitting sources were determined in situ by combining a differential mobility analyzer (DMA) and an aerosol particle mass analyzer (APM). High-resolution transmission electron microscopy was also used. The soot sources were diesel engines, diffusion flame soot generators, and tapered candles, operated under varying conditions. The soot microstructure was found to be similar for all sources and settings tested, with a distance between the graphene layers of 3.7-3.8 angstrom. The particle specific surface area was found to vary from 100 to 260m(2)/g. The particle mass-mobility relationship could be described by a power law function with an average exponent of 2.3 (+/- 0.1) for sources with a volatile mass fraction <10% and primary particle sizes of 11-29nm. The diesel exhaust from a heavy duty engine at idling had a substantially higher volatile mass fraction and a higher mass-mobility exponent of 2.6. The mass-mobility exponent was essentially independent of the number of primary particles in the range covered (N-pp = 10-1000). Despite the similar exponents, the effective density varied substantially from source to source. Two parameters were found to alter the effective density: primary particle size and coating mass fraction. A correlation was found between primary particle size and mass-mobility relationship/effective density and an empirical expression relating these parameters is presented. The effects on the DMA-APM results of doubly charged particles and DMA agglomerate alignment were investigated and quantified. Finally, the dataset was compared to three theoretical approaches describing agglomerate particles' mass-mobility relationship. Copyright 2013 American Association for Aerosol Research
|
|
9. |
- Shi, Bingbing, 1983, et al.
(author)
-
Intermediate air filters for general ventilation applications: An experimental evaluation of various filtration efficiency expressions
- 2013
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 47:5, s. 488-498
-
Journal article (peer-reviewed)abstract
- Neither the European standard nor the US standard for classification of intermediate class filters comprises testing of filter performance with respect to ultrafine particles (UFPs) or particles of the most penetrating size (MPPS). This could turn out to be a major lack in classification standards since UFPs have been pointed out as a serious health hazard. In this study, fractional efficiencies of eight new full-scale bag filters and twenty-three new filter medium samples were determined. The influence of air velocity and aerosol type was investigated, and correlations between efficiencies for UFPs (EFUFPs), MPPS-sized particles (EFMPPS) and 0.4 μm-sized particles (EF0.4μm) were established. The tested bag filters were challenged by four aerosol types: a neutralized atomized oil aerosol, the same oil aerosol but non-neutralized, a non-neutralized thermally generated oil smoke, and a “natural” indoor aerosol. The tests were carried out at different air velocities through the filter medium, ranging between 0.08 m/s and 0.22 m/s. The relationships that were observed between EFUFPs, EFMPPS, and EF0.4μm appeared to be linear within the observed filtration efficiency ranges. These relationships were similar regardless of the test aerosol type used, but somewhat different for glass fiber filters than for charged synthetic filters. Generally, EFMPPS was 10–20% lower than EF0.4μm. The influence of air velocity variations on the size resolved efficiency was determined. The glass fiber filters showed practically the same fractional efficiencies regardless of whether the test aerosol was neutralized or not. However, the charged synthetic filters showed substantially lower efficiencies when tested with the non-neutralized aerosol compared to the case when the aerosol was neutralized.
|
|
10. |
- Weiland, Fredrik, et al.
(author)
-
Online Characterization of Syngas Particulates Using Aerosol Mass Spectrometry in Entrained-Flow Biomass Gasification
- 2014
-
In: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 48:11, s. 1145-1155
-
Journal article (peer-reviewed)abstract
- Entrained flow gasification is a promising technique where biomass is converted to a synthesis gas (syngas) under fuel rich conditions. In contrast to combustion, where the fuel is converted to heat, CO2 and H2O, the syngas from gasification is rich in energetic gases such as CO and H2. These compounds (CO and H2) represent the building blocks for further catalytic synthesis to chemicals or biofuels. Impurities in the syngas, such as particulates, need to be reduced to different levels depending on the syngas application. The objective of this work was to evaluate the amount of particulates; the particle size distribution and the particle composition from entrained flow gasification of pine stem wood at different operating conditions of the gasifier. For this purpose online time resolved measurements were performed with a Soot Particle Aerosol Mass Spectrometer (SP-AMS) and a Scanning Mobility Particle Sizer (SMPS). The main advantage of SP-AMS compared to other techniques is that the particle composition (soot, PAH, organics and ash forming elements) can be obtained with high time resolution and thus studied as a direct effect of the gasifier operating conditions. The results suggest that syngas particulates were essentially composed of soot at these tested process temperatures in the reactor (1200–1400 °C). Furthermore, the AMS analysis showed a clear correlation between the amounts of polycyclic aromatic hydrocarbons (PAH) and soot in the raw syngas. Minimization of soot and PAH yields from entrained flow gasification of wood proved to be possible by further increasing the O2 addition.
|
|