1. |
- Abadei, Saeed, 1961, et al.
(author)
-
Low frequency characterisation of laser ablation deposited thin Na0.5K0.5NbO3 (NKN) films for microwave application
- 2001
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 263:1, s. 173-179
-
Journal article (peer-reviewed)abstract
- Experimental results on three types of Na0.5K0.5NbO3 (NKN) film capacitor structures are presented. The epitaxial NKN thin films have been deposited on (100) Si (high resistivity), SiO2/Si (low resistivity) and Pt/Si (low resistivity) substrates using laser ablation deposition. Both straight slot and interdigital electrode have been deposited on top of the NKN films. The leakage current and low frequency dielectric properties (I-V, C-V, tanδ-V) of the structures have been measured at 1 MHz as a function of electric field at room temperature. In all three types of capacitor structures the leakage currents in a-b plane are very small, while along c-axis there are extremely large leakage currents. On low resistivity silicon substrates the tunability of the dielectric permittivity is about 12% and loss tangent is low also. On high resistivity (ρ>10 kOhm cm) silicon substrate the tunability at 1 MHz is extremely high, about 10 times, and the losses are also high. On the other hand at microwave frequencies the losses are small (tanδ
|
|
2. |
- Abadei, S., et al.
(author)
-
Microwave properties of tunable capacitors basee on magnetron sputtered ferroelectric Na0.5K0.5NbO3 film on low and high resistivity silicon substrates
- 2001
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 39:1-4, s. 359-366
-
Conference paper (other academic/artistic)abstract
- In this work, small signal DC voltage dependent dielectric permittivity, loss tangent, and tuneability of magnetron sputtered epitaxial Na0.5K0.5NO3 films are studied experimentally. (100)-oriented Na0.5K0.5NbO3 films are deposited onto SiO2-buffered CMOS grade low resistivity (p = 10-20 cm) and high resistivity (p = 15-45 kcm) silicon substrates. Planar capacitors with 2 or 4 m gaps between electrodes have been fabricated on top of ferroelectric films. These devices have been characterized in the frequency range 1.0 MHz to 50 GHz at temperatures 30 - 300K. Na0.5K0.5NbO3/SiO2/Si structures on high resistivity silicon substrate exhibit C-V performances typical for Metal-Insulator- Semiconductor (MIS) capacitors. At low frequencies, f 1.0 GHz, the large tuneability and large losses are associated with the MIS structure, while at higher microwave frequencies the tuneability is mainly associated with the ferroelectric, film. At 1.0 MHz and room temperature, the tuneability of Na0.5K0.5NbO3/SiO2/Si structures more than 90%, reducing to 10-15 % at 50 GHz. The losses decrease with increasing the DC bias and frequency. A Q-factor more than 15 at 50 GHz is observed. The dielectric permittivity of the Na0.5K0.5NbO3 film is in the range 50-150 at frequencies 0.045-50 GHz. On low resistivity substrate the performance of Na0.5K0.5NbO3 films is completely screened by the high losses in silicon, and the tuneability is negligible. © 2001 Taylor and Francis.
|
|
3. |
- Blomqvist, Mats, et al.
(author)
-
Rf sputtered Na0.5K0.5NbO3 films on oxide substrates as optical waveguiding material
- 2003
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 54, s. 631-640
-
Journal article (peer-reviewed)abstract
- Highly crystalline Na0.5K0.5NbO3 (NKN) thin films of 1-2 mum thickness were deposited by rf-magnetron sputtering of a stoichiometric, ceramic target on single crystal LaAlO3 (001) and Al2O3 (01 (1) under bar2) substrates. X-ray diffraction measurements revealed epitaxial quality of NKN/LaAlO3 film structures, whereas NKN films on sapphire substrates were found to be preferentially c -axis oriented. A prism-coupling technique was used to characterize optical and waveguiding properties. A bright-line spectrum at lambda = 632.8 nm, revealed sharp peaks, corresponding to transverse magnetic (TM) and electric (TE) waveguide propagation modes in NKN/LaAlO3 and NKN/Al2O3 thin films. Using a least mean square fit the refractive index for the films and film thickness were calculated. The extraordinary and ordinary refractive indices were determined to n(e) = 2.207 +/- 0.002 and n(o) = 2.261 +/- 0.002, and n(e) = 2.216 +/- 0.002 and n(o) = 2.247 +/- 0.002 at lambda = 632.8 nm for 2.0 mum thick NKN films on LaAlO3 and Al2O3 , respectively. This corresponds to a birefringence Deltan = n(e) - n(o) = -0.054 +/- 0.003 and Deltan = -0.031 +/- 0.003 in the films, where the larger Deltan for the NKN/LaAlO3 structure can be explained by the superior crystalline quality compared to NKN/Al2O3 . Atomic force microscopy images of the film surfaces revealed rms roughnesses of 2.5 nm and 8.0 nm for 1.0-mum thick NKN/LaAlO3 and NKN/Al2O3 films, respectively. We believe surface scattering is one of the main sources of waveguide losses in the thin films.
|
|
4. |
- Cho, C. R., et al.
(author)
-
Ferroelectric Na0.5K0.5NbO3 thin films by pulsed laser deposition
- 2000
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 31:1-4, s. 35-45
-
Journal article (peer-reviewed)abstract
- Highly c-axis oriented single phase Na0.5K0.5NbO3 (NKN) thin films have been deposited onto polycrystalline Pt80Ir20 substrates and SiO2/Si(001) wafers using pulsed laser ablation of stoichiometric ceramic target. Strong self-assembling of NKN films along the [001] direction has been observed. Properties of NKN/Pt thin film structures have been successfully tailored by oxygen pressure control from the ferroelectric state, characterized by the remnant polarization of 12 muC/cm(2), dielectric constant epsilon similar to 520 and tan delta - 0.024 @ 100 kHz, to superparaelectric state with tan delta as low as 0.003 and epsilon = 210 with very small 1.7% dispersion in the frequency domain 0.4-100 kHz and less than 10% Variation in the temperature range 77-415 K. NKN films grown onto SiO2/Si(001) substrates show quadrupled super-lattice structure along c-axis, loss tan delta less than 0.01, and epsilon similar to 110 @ 1 MHz. C-V measure ments for Au/NKN(270nm)/SiO2/Si MFIS-diode structure yield memory window of 3.26 V at the programmable voltage of 8 V.
|
|
5. |
- Cho, C. R., et al.
(author)
-
Na0.5K0.5NbO3 thin films for MFIS_FET type non-volatile memory applications
- 2002
-
In: Integrated Ferroelectrics. - 1058-4587 .- 1607-8489. ; 49, s. 21-30
-
Journal article (peer-reviewed)abstract
- Na0.5K0.5NbO3(NKN) thin films have been prepared on Pt80Ir20, SiO2/Si, and Ta2O5/Si substrates for ferroelectric non-volatile memory applications. Ferroelectric hysteresis loops for Au/NKN/Pt80Ir20 vertical capacitor yielded remnant polarization of 12 muC/cm(2) and coercive field similar to20 kV/cm. Significant flat-band voltage V-FB shifts with buffer layer thickness in Au/NKN/SiO2/Si structures have been attributed to the intermixing between Na and K alkali ions and SiO2 layer. On the other hand, Au/NKN/Ta2O5/Si structure exhibited wide memory window without significant V-FB deviations, low leakage currents, and rather long retention time at zero bias.
|
|
6. |
- Cho, C. R., et al.
(author)
-
Thickness dependent performance of Na0.5K0.5NbO3/sapphire thin film varactors
- 2001
-
In: Integrated Ferroelectrics. - 1058-4587 .- 1607-8489. ; 39:1-4, s. 1353-1360
-
Journal article (peer-reviewed)abstract
- Perfect c-axis oriented Na0.5K0.5NbO3 (NKN) films have been pulsed laser deposited on Al2O3(01 (1) under bar2) single crystals (r-cut sapphire) for voltage tunable microwave device applications. Thickness dependence of dielectric performance of the NKN/sapphire interdigital capacitors (IDCs) has been studied. 40 V bias tunability and dielectric loss tandelta of 4 burr slot IDCs have been found to be 24.6 % and 2.86 % for 1.2 mum thick NKN film, and 6.1 % and 0.83 % for 0.14 mum thick NKN film, respectively. Low leakage currents and high breakdown voltages are observed in these structures.
|
|
7. |
- Gevorgian, Spartak, 1948, et al.
(author)
-
DC field induced antiferroelectric phase transition in bulk, single crystal strontium titanate
- 2001
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 33:1-4, s. 323-329
-
Journal article (peer-reviewed)abstract
- Dielectric hysteresis in bulk, single crystal SrTiO3 (STO) with YBa2Cu3O7. x(YBCO) electrodes is studied experimentally at 77K. In contrast with previously reported experiments [1], [2] the antiferroelectric phase transition is observed at higher temperature (i.e. 77K). The phase transition is observed where the crystal is cooled either with short circuited or with open circuited electrodes. The phase transition does not result in detectable changes in the microwave losses.
|
|
8. |
|
|
9. |
- Gevorgian, Spartak, 1948, et al.
(author)
-
Strain induced ferroelectrosity in epitaxial SrTiO3 films
- 2001
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 33:1-4, s. 311-321
-
Journal article (peer-reviewed)abstract
- Microwave performances of planar capacitors formed on epitaxial SrTiO 3 (STO) films reveal that two-dimensional, in-plane strain in the film lead to a formation of a stable non-cubic, low symmetry ferroelectric phase. The residual polarization vector has two stable states, normal to the film surface, and may be switched under applied DC bias. Due to the charges in surface/interface levels, the films may contain either a single or opposing domains
|
|
10. |
- Grishin, Alexander M., et al.
(author)
-
Epitaxial colossal magnetoresistive/ferroelectric heterostructures on Si
- 2004
-
In: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 67, s. 69-76
-
Journal article (peer-reviewed)abstract
- We report on processing and properties of La-0.67(SrCa)(0.33)MnO3 (LSCMO) films grown by pulsed laser deposition technique on Si(001) substrates buffered with Bi4Ti3O12/CeO2/YSZ heteroepitaxial layers. X-ray diffraction shows cube-on-cube growth of epitaxial Bi4Ti3O12/CeO2/YSZ/Si heterostructure whereas the LSCMO layer grows in the diagonal-on-side manner onto the Bi4Ti3O12 (BTO) template. High resolution TEM images demonstrate sharp interfaces between the buffer layers and LSCMO film as well as rare misfit dislocations on the CeO2/YSZ interface. LSCMO film processing conditions have been optimized to get maximum temperature coefficient of resistivity TCR = 4.4% K-1 and colossal magnetoresistance (CMR) Deltarho/rho similar to 2.9% kOe(-1) @ 294 K. Almost ultimate CMR performance at room temperature has been achieved due to successive improvement of c-axis orientation of layers: full widths at half-maximum (FWHM) = 0.65, 0.58, 0.65, 1.13 and 0.18 degrees in LSCMO/BTO/CeO2/YSZ/Si stack, respectively. Characterization of electrical noise in CMR film yields Noise Equivalent Temperature Difference (NETD) as low as 1.2 muK/rootHz @ 30 Hz and 294 K.
|
|