1. |
- Bauer, Torben, et al.
(author)
-
Co-digestion of sewage sludge and wood fly ash
- 2022
-
In: Environmental technology. - : Taylor & Francis. - 0959-3330 .- 1479-487X. ; 43:12, s. 1853-1859
-
Journal article (peer-reviewed)abstract
- This study uses a new approach for the recycling of plant nutrients by co-digesting sewage sludgewith fly ash from a wood combustion. Sewage sludge and fly ash both are enriched with nutrientsof the wastewater resp. wood, which makes these products an enhanced source for recycledfertilizers. The effects of the ash addition to the anaerobic digestion are studied in several labscale experiments including effects on the gas production and microbial activity. Following that,the fertilizing qualities of the digestate are evaluated by plant growth experiments. The resultsshow that the fertilizing qualities of the digested sludge were improved by the ash addition.Next to this, gas production results show that the methane production was not affected by theash addition, while the total gas release was reduced. The sulphur addition by the ashstimulated sulphate reducing bacteria. The sulphate reducing bacteria did not markedly inhibitthe methanogens.
|
|
2. |
- Chaudhary, Ramjee, et al.
(author)
-
Kinetic study of nutrients removal from municipal wastewater by Chlorella vulgaris in photobioreactor supplied with CO2-enriched air
- 2020
-
In: Environmental technology. - : TAYLOR & FRANCIS LTD. - 0959-3330 .- 1479-487X. ; 41:5, s. 617-626
-
Journal article (peer-reviewed)abstract
- The microalgae Chlorella vulgaris ATCC 13482 was used in the present study for municipal wastewater treatment. Batch experiments were performed in bubble column photobioreactors of 7 L working volume maintained at 25 +/- 2 degrees C and 14 h/10 h of photo and dark cycle. The treatment process was enhanced by using CO2-augmented air (5% CO2 v/v) supply into the microalgal culture in comparison to the use of normal air (0.03% CO2 v/v). For a period of 7 days, C. vulgaris effected maximum removals of 74.4% soluble fraction of chemical oxygen demand, 72% ammonia (NH4-N), 60% nitrate (NO3-N) and 81.93% orthophosphate (PO4-P) with use of normal air, whereas 84.6% sCOD, 88% NH4-N, 72% NO3-N and 92.8% PO4-P removals, respectively, with use of 5% CO2/air supply. Using kinetic study data, the specific rates of ammonia and phosphate uptake (q(ammonia) and q(phosphate)) by C. vulgaris at 5% CO2/air supply were found to be 2.41 and 0.85 d(-1), respectively. Using the algal remediation technology, nitrogen-phosphorus-potassium recovery from sewage treatment plant of 37.5 million litres per day wastewater influent capacity was calculated to be similar to 298.5, 55.4 and 83.7 kg d(-1), respectively.
|
|
3. |
- Gidstedt, Simon, et al.
(author)
-
Chemically enhanced primary treatment, microsieving, direct membrane filtration and GAC filtration of municipal wastewater : a pilot-scale study
- 2022
-
In: Environmental Technology (United Kingdom). - : Taylor and Francis Ltd.. - 0959-3330 .- 1479-487X. ; , s. 12
-
Journal article (peer-reviewed)abstract
- Chemically enhanced primary treatment (CEPT) followed by microsieving and direct membrane filtration (DMF) as ultrafiltration, was evaluated on pilot scale at a municipal wastewater treatment plant. In addition, a granular activated carbon (GAC) filter downstream of DMF was evaluated for the removal of organic micropollutants. Up to 80% of the total organic carbon (TOC) and 96% of the total phosphorus were removed by CEPT with microsieving. The additional contribution of subsequent DMF was minor, and only five days of downstream GAC filtration was possible due to fouling of the membrane. Of the 21 organic micropollutants analysed, all were removed (≥ 98%) by the GAC filter until 440 bed volumes, while CEPT with microsieving and DMF removed only a few compounds. Measurements of the oxygen uptake rate indicated that the required aeration for supplementary biological treatment downstream of CEPT with microsieving, both with and without subsequent DMF, was 20−25% of that in the influent wastewater. This study demonstrated the potential of using compact physicochemical processes to treat municipal wastewater, including the removal of organic micropollutants.
|
|
4. |
- Giles, A. B., et al.
(author)
-
Using multispectral drones to predict water quality in a subtropical estuary
- 2022
-
In: Environmental Technology. - : Informa UK Limited. - 0959-3330 .- 1479-487X.
-
Journal article (peer-reviewed)abstract
- Drones are revolutionising earth system observations, and are increasingly used for high resolution monitoring of water quality. The objective of this research was to test whether drone-based multispectral imagery could predict important water quality parameters in an ICOLL (intermittently closed and opened lake or lagoon). Three water quality sampling campaigns were undertaken, measuring temperature, salinity, pH, dissolved oxygen (DO), chlorophyll (CHL), turbidity, total suspended sediments (TSS), coloured dissolved organic matter (CDOM), green algae, crytophyta, diatoms, bluegreen algae and total algal concentrations. DistilM statistical analyses were conducted to reveal the bands accounting for the most variation across all water quality data, then linear correlations between specific band/band ratios and individual water quality parameters were performed. DistilM analyses revealed the NIR band accounted for most variation in March, the Green band in April and the RE band in May, and showed that the most important contributors varied significantly among campaigns and variables. Significant linear correlations with R-2 > 0.4 were obtained for eleven of the water quality parameters tested, with the strongest correlation obtained for CHL and the green band (R-2 = 0.72). The relative importance of predictor bands and observed water quality parameters varied temporally. We conclude that drones with a multispectral sensor can produce useful 'snapshot' prediction maps for a range of water quality parameters, such as chlorophyll, bluegreen algae and dissolved oxygen. However, a single model was insufficient to reproduce the temporal variation of water parameters in dynamic estuarine systems.
|
|
5. |
- Goswami, Rahul Kumar, et al.
(author)
-
Development of economical and sustainable cultivation system for biomass production and simultaneous treatment of municipal wastewater using Tetraselmis indica BDUG001
- 2023
-
In: Environmental technology. - : Taylor & Francis. - 0959-3330 .- 1479-487X.
-
Journal article (peer-reviewed)abstract
- Microalgal-based bioprocess offers several advantages including wastewater reclamations, therefore present study assessed the usability of the combination of untreated municipal sewage wastewater (UTMSWW) and secondary treated municipal sewage wastewater (STSWW) for nutrient removal and recovery by Tetraselmis indica (T. indica) BDUG001. The present study optimized the additional nutrient supplementations (e.g. ASN-III) percentage and day-night cycle, pH and pH with aeration for monitoring high-rate biomass production and nutrient recovery. The study results showed that the combination of 75% UTMSWW + 25% ASN-III supported maximum biomass production (2.65 ± 0.07 g/L). In the optimized day-night cycle (12:12 h), T. indica BDUG001 showed improved biomass production (2.75 ± 0.07 g/L), biomass productivity (165.63 ± 4.42 mg/L/d), and photosynthetic pigments production. Under optimized pH∼ 7.0 with aeration, maximum total nitrate (TN) removal efficiency (87.67 ± 3.08–91.55 ± 1.92%) was observed, while COD and TP removal was maximum at pH ∼ 9.0. The maximum biomass production (2.35 ± 0.07–2.77 ± 0.04 g/L) with biomass productivity (93.75 ± 167.19 ± 2.21 mg/L/d) and lipid content (42.98 ± 1.86–47.85 ± 0.21% DCW) were also at pH 7.0. with aeration. The present study verified the utilization of UTMSWW with the combination of conventional medium, optimized day-night cycle, pH with aeration along with designing low-cost PBR. It was the ideal system for the cultivation of T. indica BDUG001 for the recovery of nutrients from wastewater, production of biofuels and value-added feedstock.
|
|
6. |
- Ibupoto, A.S., et al.
(author)
-
Zno/Carbon nanofibers for efficient adsorption of lead from aqueous solutions
- 2020
-
In: Environmental technology. - : Taylor & Francis. - 0959-3330 .- 1479-487X. ; 41:21, s. 2731-2741
-
Journal article (peer-reviewed)abstract
- Hybrid nanofibers based on ZnO loaded activated carbon nanofibers (ZnO-ACNFs) are proposed here for the elimination of hazardous lead from aqueous solutions. The prepared ZnO nanoscale material was loaded into the polyacrylonitrile nanofibers (PAN NFs) which were later carbonized by using a novel method named as a plate-sandwich method. The Synthesized nanofibrous composite was characterized by SEM, TEM, EDX, FTIR and XRD techniques to analyze its chemical and morphological properties. Moreover, the nanocomposite was efficaciously applied for the lead (Pb2+) ions removal from wastewater and simulated water through continuous filtration and batch filtration. The ZnO-ACNFs membrane showed outstanding results in adsorptive removal, giving adsorption capacity of 92.59 mg/g within the contact time of 45 min. Compared to their counterparts (ZnO and CNFs), the hybrid ZnO-ACNFs showed excellent performance in removing toxic lead.
|
|
7. |
- Milovanovic, Ivan, 1990-, et al.
(author)
-
Synthetic stormwater for laboratory testing of filter materials
- 2023
-
In: Environmental technology. - : Taylor & Francis. - 0959-3330 .- 1479-487X. ; 44:11, s. 1600-1612
-
Journal article (peer-reviewed)abstract
- Synthetic stormwater was tested to determine the ageing effects on dissolved metal concentrations and used in a column experiment to determine efficiency of four different filter materials (milkweed, bark, peat, polypropylene) in removing total and dissolved metals. Synthetic stormwater was created by adding metal salts, oil and collected stormwater sediment to tap water. Two ageing experiments were performed to determine the change of synthetic stormwater quality over time. One experiment lasted for 11 days and another focused on rapid concentration changes one day after preparation. The one-day ageing experiment showed rapid decrease in dissolved concentration of certain metals, specifically Cu. To consider this change, correction coefficients for each metal were developed and used to estimate the average dissolved metal concentration in the synthetic stormwater during the experiment to determine filter treatment efficiency. During the 11-day experiment on metal concentrations, no noticeable quality changes were observed for at least six days after the preparation of synthetic stormwater. Furthermore, a column experiment was run with duplicate filter columns. Inflow and outflow samples were analysed for total and dissolved metals, turbidity, particle size distribution, and pH. High removal of total metal concentrations was noticed in all tested filter media (58-94%). Dissolved metal concentration removal varied among different filter media. In general, columns with bark and peat media were able to treat dissolved metals better than polypropylene and milkweed. The level of treatment of dissolved metals between the different filter media columns were bark > peat > milkweed > polypropylene.
|
|
8. |
- Olsheimer, Dora, et al.
(author)
-
Ex-situ manometric activity test for evaluation of mainstream anammox in Moving Bed Biofilm Reactors
- 2022
-
In: Environmental Technology. - : Informa UK Limited. - 0959-3330 .- 1479-487X. ; 43:13, s. 1980-1987
-
Journal article (peer-reviewed)abstract
- Implementing anammox based processes in the mainstream at municipal wastewater treatment plants is challenging and requires carefully constructed control strategies in order to be successful. A method to measure the specific anammox activity was further developed and implemented in the mainstream anammox pilot plant at Sjölunda Wastewater Treatment Plant. The method was found to be reliable and reproducible. The influence of initial nitrite and ammonium concentrations on the activity as well as temperature dependency were analysed. The continuously monitored manometric batch tests were performed on Moving Bed Biofilm Reactor carriers type K1®. The activity showed a dependency of initial nitrite concentrations below 75 mg N L−1 whereas the activity was independent of initial nitrite concentrations in the interval of 75–125 mg N L−1. Temperature dependency of the specific anammox activity as expressed in activation energy Ea increased at lower temperatures (10–20°C) compared to higher temperatures (20–30°C). Decreasing temperature from 30°C to 10°C resulted in 95–98% loss of the anammox activity.
|
|
9. |
- Pour, Fatemeh Shouli, et al.
(author)
-
Comparison of 2- and 3-Compartment Electrodialytic Remediation Cells for Oil Polluted Soil from Northwest Russia
- 2021
-
In: Environmental technology. - : Taylor & Francis. - 0959-3330 .- 1479-487X. ; 42:25, s. 3900-3906
-
Journal article (peer-reviewed)abstract
- Electrodialytic remediation is a method based on electrokinetics, in which an electric field of low intensity increases the availability of pollutants in solid waste materials. The electric field induces processes that mobilize and transport inorganic and organic pollutants. The transport of ions in the electrodialytic cell is controlled by employing ion-exchange membranes, allowing separation of the electrodes from the solids. In this study, using a two cell design, electrodialytic experiments were conducted to compare remediation of a heavily oil-polluted soil from Arkhangelsk, Russia. The 2-compartment cell has not previously been employed for electrodialytic removal of organic pollutants and was tested along with the traditional 3-compartment design. The influence of experimental variables (current density, remediation time, stirring and light) and settings on the two cell designs was investigated. The highest removal (77%) of total hydrocarbons (THC) was observed in the 3-compartment cell at high current density (0.68 mA/cm2), longer remediation time (28 days), stirring and exposure to daylight. High current density and stirring increased the removal efficiencies in both cell designs. Within the studied experimental domain, the removal efficiencies in the 3-compartment cell (10-77%) were however, higher than those observed in the 2-compartment cell (0-38%).
|
|
10. |
- Quiroga Flores, Roxana, et al.
(author)
-
Adsorption of cadmium by a high-capacity adsorbent composed of silicate-titanate nanotubes embedded in hydrogel chitosan beads
- 2020
-
In: Environmental Technology. - : Informa UK Limited. - 1479-487X .- 0959-3330. ; 41:23, s. 3043-3054
-
Journal article (peer-reviewed)abstract
- In this study, we developed a nanoparticle-based mesoporous composite that consisted of silicate-titanate nanotubes (STNTs) supported in hydrogel chitosan beads (STNTs-Ch beads) and was studied for Cd2+ adsorption. By using Fourier-transform infrared spectroscopy, transmission and scanning electron microscopy coupled to an energy-dispersive X-ray spectrometer, we coulddetermine that the hollow STNTs were highly dispersed in the walls of the hollow beads. The dispersion was attributed to the effect of pH when the composite was prepared and we observed a non-interaction between STNTs and chitosan. The adsorption studies of Cd2+ showed that the kinetic rate (k2) increased 3-fold and that the diffusion rate (Kd) increased 2-fold afterthe embedment. Moreover, the maximum capacity of adsorption of STNTs-Ch beads was 2.3 times higher than that of STNTs alone. The treatment of a synthetic Cd2+ solution and a real leachate in continuous mode showed two phases in which it was observed higher removed fractions of transition metal ions (Cd2+, Co2+, Ni2+, Zn2+ and Cu2+) and the post-transition metal ion Pb2+, in comparison to the removed fractions of alkali and alkali-earth metal ions (Ca2+, K+, Mg2+). The composite was successfully reused four times when adsorbing Cd2+, saving three times the needed amounts of TiO2, SiO2 and chitosan for the production of the material. This composite was produced in a simple way and shows the potential for wastewater treatment.
|
|