1. |
- Andersson, Gabriella, et al.
(author)
-
Anisotropy Tuning in Tetragonal FeCo Alloys
- 2010
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 10:9, s. 6186-6189
-
Journal article (peer-reviewed)abstract
- We review our previous work on magnetocrystalline anisotropy tuning of superlattices based on tetragonally distorted FeCo-alloys. In addition we present new experimental results on the effect of changing the composition of the FeCo alloy. The discussion is based on the separation of the magnetocrystalline anisotropy into contributions from the interfaces and strain, as well as from the composition.
|
|
2. |
- Anttu, Nicklas, et al.
(author)
-
Coupling of Light into Nanowire Arrays and Subsequent Absorption
- 2010
-
In: Journal of Nanoscience And Nanotechnology. - : American Scientific Publishers. - 1533-4899 .- 1533-4880. ; 10:11, s. 7183-7187
-
Conference paper (peer-reviewed)abstract
- We present a theoretical study of the absorption of light in periodic arrays of InP nanowires. The absorption in the array depends strongly on the diameter and the length of the nanowires, as well as the period of the array. Nanowires of a length of just 2 Am are able, after an appropriate choice for the other parameters, to absorb more than 90% of the incident energy of TE and TM polarized light, with photon energies almost all the way down to the band gap energy and an incidence angle up to 50 degree. This high total absorption arises from a good coupling of the incident light into the nanowire array at the top interface between air and the array and absorption inside the array before the light reaches the interface between the nanowires and the substrate. We find that for a given photon energy there exists a critical nanowire diameter above which a dramatic increase in the absorption occurs. The critical diameter decreases for increasing photon energies, and is directly related to the dispersion of waveguiding modes in single isolated nanowires. A characterization showed that the absorption characteristics of the nanowire arrays are very promising for photovoltaic applications.
|
|
3. |
- Bora, Tanujjal, et al.
(author)
-
Applications of nanotechnology in wastewater treatment-A review
- 2014
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 14:1, s. 613-626
-
Journal article (peer-reviewed)abstract
- Water on Earth is a precious and finite resource, which is endlessly recycled in the water cycle. Water, whose physical, chemical, or biological properties have been altered due to the addition of contaminants such as organic/inorganic materials, pathogens, heavy metals or other toxins making it unsafe for the ecosystem, can be termed as wastewater. Various schemes have been adopted by industries across the world to treat wastewater prior to its release to the ecosystem, and several new concepts and technologies are fast replacing the traditional methods. This article briefly reviews the recent advances and application of nanotechnology for wastewater treatment. Nanomaterials typically have high reactivity and a high degree of functionalization, large specific surface area, size-dependent properties etc., which makes them suitable for applications in wastewater treatment and for water purification. In this article, the application of various nanomaterials such as metal nanoparticles, metal oxides, carbon compounds, zeolite, filtration membranes, etc., in the field of wastewater treatment is discussed.
|
|
4. |
- Carvalho, Alexandra T.G., et al.
(author)
-
Electronic and optical properties of chlorinated silicon nanoparticles
- 2013
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 13:2, s. 1039-1042
-
Journal article (peer-reviewed)abstract
- First-principles calculations are used to investigate the structure, electronic and optical properties of silicon nanocystals with chlorine-passivated surface. The nanocrystals considered were approximately spherical, with diameters between 1.5 and 3.0 nm. We show that the nanocrystals with chlorinated surface have a smaller bandgap, lower optical absorption threshold, and greater ionization energy and electron affinity than hydrogenated silicon nanocrystals of the same size
|
|
5. |
- Carvalho, Alexandra T.G., et al.
(author)
-
Increased electronic coupling in silicon nanocrystal networks doped with F4-TCNQ
- 2013
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 13:2, s. 1035-1038
-
Journal article (peer-reviewed)abstract
- The modification of the electronic structure of silicon nanocrystals using an organic dopant, 2,3,5,6- tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4-TCNQ), is investigated using first-principles calculations. It is shown that physisorbed F4-TCNQ molecules have the effect of oxidizing the nanocrystal, attracting the charge density towards the F 4-TCNQ-nanocrystal interface, and decreasing the excitation energy of the system. In periodic F4-TCNQ/nanocrystal superlattices, F 4-TCNQ is suggested to enhance exciton separation, and in the presence of free holes, to serve as a bridge for electron/hole transfer between adjacent nanocrystals.
|
|
6. |
- Coelho, Margarida, et al.
(author)
-
Nanotechnology in automotive industry : research strategy and trends for the future – small objects, big impacts
- 2012
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 12:8, s. 6621-6630
-
Journal article (peer-reviewed)abstract
- The goal of this paper is to emphasize and present briefly the nanotechnology science and its potential impact on the automotive industry in order to improve the production of recent models with an optimization of the safety performance and a reduction in the environmental impacts. Nanomaterials can be applied in car bodies as light weight constructions without compromising the stiffness and crashwortiness, which means less material and less fuel consumption. This paper outlines the progress of nanotechnology applications into the safety features of more recent vehicle models and fuel efficiency, but also emphasis the importance of sustainable development on the application of these technologies and life cycle analysis of the considered materials, in order to meet the society trends and customers demands to improve ecology, safety and comfort.
|
|
7. |
- Ding, Zong-Ling, et al.
(author)
-
Effect of Electrodes on Geometric and Transport Properties of the Graphene-Based Nanomolecular Devices
- 2011
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 11:12, s. 10778-10781
-
Journal article (peer-reviewed)abstract
- Graphene-based nanomolecular devices are formed by connecting one of the prototype molecular materials of graphene nanoribbons to two Au electrodes. The geometric structure and electronic properties are calculated by using density functional theory. Basing on the optimized structure and the electronic distributions, we obtain the transport properties of the devices by using the Green's functional method. It is found that that the geometry structures of the molecule and the transport properties are sensitive to the distance between source and drain electrodes. With increasing the distances, the curvature radius of the atomic plane is increased, and the deformation energy is decreased. The current versus voltage curves have almost same threshold voltage with different distances between the electrodes. The transmission probability, the density of states and the external bias voltage play important role in determining the transport properties of the molecular devices.
|
|
8. |
- Fan, Liangdong, 1985-, et al.
(author)
-
Study of Ceria-Carbonate Nanocomposite Electrolytes for Low-Temperature Solid Oxide Fuel Cells
- 2012
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 12:6, s. 4941-4945
-
Journal article (peer-reviewed)abstract
- Composite and nanocomposite samarium doped ceria-carbonates powders were prepared by solidstatereaction, citric acid-nitrate combustion and modified nanocomposite approaches and used aselectrolytes for low temperature solid oxide fuel cells. X-ray Diffraction, Scanning Electron Microscope,low-temperature Nitrogen Adsorption/desorption Experiments, Electrochemical ImpedanceSpectroscopy and fuel cell performance test were employed in characterization of these materials.All powders are nano-size particles with slight aggregation and carbonates are amorphous incomposites. Nanocomposite electrolyte exhibits much lower impedance resistance and higher ionicconductivity than those of the other electrolytes at lower temperature. Fuel cell using the electrolyteprepared by modified nanocomposite approach exhibits the best performance in the whole operationtemperature range and achieves a maximum power density of 839 mW cm−2 at 600 C withH2 as fuel. The excellent physical and electrochemical performances of nanocomposite electrolytemake it a promising candidate for low-temperature solid oxide fuel cells.
|
|
9. |
|
|
10. |
- Ferraz, Natalia, et al.
(author)
-
Role of Alumina Nanoporosity in Acute Cell Response
- 2011
-
In: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 11:8, s. 6698-6704
-
Journal article (peer-reviewed)abstract
- This work studied the effect of nanoporous alumina in acute cellular response in an in vivo model. Nanoporous alumina membranes, with pore size diameters of 20 and 200 nm, were fabricated by anodic oxidation of aluminium. The membranes were thereafter characterized in terms of pore size distribution and chemical composition. To evaluate acute inflammatory response, the membranes were implanted in the peritoneal cavity of mice. Cell recruitment to the implant site was determined by fluorescence activated cell sorting (FACS) analysis. Cell adhesion to material surfaces was studied in terms of cell number, type, and morphology using scanning electron microscopy (SEM) and immunocytochemical staining followed by fluorescence microscopy. The fabricated nanoporous alumina membranes were found to have narrow pore size distribution. The in vivo study showed that 200 nm alumina membranes induced stronger inflammatory response than 20 nm membranes. This was reflected by the number of implant-associated phagocytes and the number of cells recruited to the implantation site. Since both pore-size membranes possess similar chemical composition, we believe that the observed difference in cell recruitment and adhesion is an effect of the material nanotopography. Our results suggest that nanotopography can be used to subtly control the recruitment and adherence of phagocytic cells during the acute inflammatory response to alumina membranes.
|
|