1. |
- Amin, Sidra, et al.
(author)
-
MoSx-Co3O4 Nanocomposite for Selective Determination of Ascorbic Acid
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2595-2603
-
Journal article (peer-reviewed)abstract
- Designing a nanocomposite with sensitive and selective determination of ascorbic acid is challenging task. It is possible through the exploitation of attractive features of nanoscience and nanotechnology for the synthesis of nanostructured materials. Herein, we report the decoration of nanoparticle of MoSx on the surface of Co3O4 nanowires by hydrothermal method. The MoSx nanoparticles shared the large surface on the Co3O4 nanowires, thus it supported in the development enzyme free ascorbic acid sensor. Non-enzymatic sensor based on MoSx-Co3O4 composite was found very selective for the determination of ascorbic acid (AA) in phosphate buffer solution of pH 7.4. The MoSx-Co3O4 nanocomposite was used to modify the glassy carbon electrode to measure AA from variety of practical samples. The MoSx-Co3O4 nanocomposite was used to modify the glassy carbon electrode and it has shown the attractive analytical features such as a low working potential +0.3 V, linear range of concentration from 100-7000 mu M, low limit of detection 14 mu M, and low limit of quantification (LOQ) of 42 mu M. The developed sensor is highly selective and stable. Importantly, it was applied successfully for the practical applications such as detection of AA from grapefruit, tomato and lemon juice. The excellent electrochemical properties of fabricated MoSx-Co3O4 nanocomposite can be attributed to the increasing electro active surface area of MoSx. The presented nanocomposite is earth abundant, environment friendly and inexpensive and it holds promising features for the selective and sensitive determination of AA from practical applications. The nanocomposite can be capitalized into the wide range of biomedical applications.
|
|
2. |
- Bhatti, Adeel Liaquat, et al.
(author)
-
An Efficient and Functional Fe3O4/Co3O4 Composite for Oxygen Evolution Reaction
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2675-2680
-
Journal article (peer-reviewed)abstract
- The design of efficient, stable, durable and noble metal free electro catalysts for oxygen evolution reaction (OER) are of immediate need, but very challenging task. In this study, iron induction into cobalt oxide (Co3O4) has resulted composite structure by wet chemical method. The iron impurity has brought an electronic disorder into Fe3O4/cobalt oxide composite thereby efficient oxygen evolution reaction is demonstrated. An addition of iron content into composite resulted the alternation of morphology from Nano rods to clusters of nanoparticles. The successive addition of iron into composite system reduced the onset potential of OER as compared to the pristine cobalt oxide. A Tafel slope of 80 mVdec(-1) indicates the favorable oxygen evolution reaction kinetics on the sample 4. An over-potential of 370 mV is required to reach a 10 mAcm(-2) current density which is acceptable for a nonprecious catalyst. The catalyst is highly durable and stable for 30 hours. Electrochemical impedance spectroscopy further provided a deeper insight on charge transfer resistance and sample 4 has low charge transfer resistance that supported the OER polarization curves. The sample 4 has more electrochemical active surface area of 393.5 cm(2). These obtained results are exciting and highlighting the importance of composite structure and leave a huge space for the future investigations on composite materials for energy related applications.
|
|
3. |
- Bhatti, Muhammad Ali, et al.
(author)
-
TiO2/ZnO Nanocomposite Material for Efficient Degradation of Methylene Blue
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2511-2519
-
Journal article (peer-reviewed)abstract
- In this research work, we have produced a composite material consisting titanium dioxide (TiO2) and zinc oxide (ZnO) nanostructures via precipitation method. Scanning electron microscopy (SEM) study has shown the mixture of nanostructures consisting nanorods and nano flower. Energy dispersive spectroscopy (EDS) study has confirmed the presence of Ti, Zn and O as main elements in the composite. X-ray diffraction (XID) study has revealed that the successful presence of TiO2 and ZnO in the composite. The composite material exhibits small optical energy band gap which led to reduction of the charge recombination rate of electron-hole pairs. The band gap for the composite TiO2/ZnO samples namely 1, 2, 3 and 4 is 3.18, 3.00, 2.97 and 2.83 eV respectively. Small optical bandgap gives less relaxation time for the recombination of electron and hole pairs, thus favorable photodegradation is found. The degradation efficiency for the TiO2/ZnO samples for methylene blue in order of 55.03%, 75.7%, 85.14% and 90.08% is found for the samples 1, 2, 3 and 4 respectively. The proposed study of titanium dioxide addition into ZnO is facile and inexpensive for the development of efficient photocatalysts. This can be capitalized at large scale for the energy and environmental applications.
|
|
4. |
- Khokhar, Shams Parveen, et al.
(author)
-
An Efficient Nickel Sulfide@NiO Nanocomposite Catalyst with High Density of Active Sites for the Hydrogen Evolution Reaction in Alkaline Media
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2520-2528
-
Journal article (peer-reviewed)abstract
- Efficient hydrogen evolution reaction (HER) catalysts based on the earth-abundant materials are highly vital to design practical and environmentally friendly water splitting devices. In this study, we present an optimized strategy for the development of active catalysts for hydrogen evolution reaction HER. The composite catalysts are prepared with the nanosurface of NiO for the deposition of NiS by hydrothermal method. In alkaline electrolyte, the NIS/NiO nanocomposite has shown excellent catalytic HER properties at the low onset potential and small Tafel slope of 72 mV dec(-1). A current density of 10 mA/cm(2) is achieved by the nanocomposite obtained with 0.4 gram of NiO as nanosurface for the deposition of NiS (sample 4) at the cost of 429 mV versus RHE. The sample 4 carries more active sites that allow it to act as excellent HER catalyst. Based on this study, we conclude that increasing the nickel oxide content into composite sample facilitates the HER process. Additionally, a long term HER stability for 10 hours and good durability is also demonstrated by the sample 4. Our findings reveal that the optimization of nickel oxide content in the preparation of catalyst leads to the excellent HER activity for the design of practical water splitting devices and other related applications.
|
|
5. |
- Mugheri, Abdul Qayoom, et al.
(author)
-
A Low Charge Transfer Resistance CuO Composite for Efficient Oxygen Evolution Reaction in Alkaline Media
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2613-2620
-
Journal article (peer-reviewed)abstract
- An efficient, simple, environment-friendly and inexpensive cupric oxide (CuO) electrocatalyst for oxygen evolution reaction (OER) is demonstrated. CuO is chemically deposited on the porous carbon material obtained from the dehydration of common sugar. The morphology of CuO on the porous carbon material is plate-like and monoclinic crystalline phase is confirmed by powder X-ray diffraction. The OER activity of CuO nanostructures is investigated in 1 M KOH aqueous solution. To date, the proposed electrocatalyst has the lowest possible potential of 1.49 V versus RHE (reversible hydrogen electrode) to achieve a current density of 20 mA/cm(2) among the. CuO based electrocatalysts and has Tafel slope of 115 mV dec(-1). The electrocatalyst exhibits an excellent long-term stability for 6 hours along with significant durability. The enhanced catalytic active centers of CuO on the carbon material are due to the porous structure of carbon as well as strong coupling between CuO-C. The functionalization of metal oxides or other related nanostructured materials on porous carbon obtained from common sugar provides an opportunity for the development of efficient energy conversion and energy storage systems.
|
|
6. |
- Mugheri, Abdul Qayoom, et al.
(author)
-
Chemically Coupled Cobalt Oxide Nanosheets Decorated onto the Surface of Multiwall Carbon Nanotubes for Favorable Oxygen Evolution Reaction
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2660-2667
-
Journal article (peer-reviewed)abstract
- Cobalt oxide has been widely investigated among potential transition metal oxides for the electrochemical energy conversion, storage, and water splitting. However, they have inherently low electronic conductivity and high corrosive nature in alkaline media. Herein, we propose a promising and facile approach to improve the conductivity and charge transport of cobalt oxide Co3O4 through chemical coupling with well-dispersed multiwall carbon nanotubes (MWCNTs) during hydrothermal treatment. The morphology of prepared composite material consisting of nanosheets which are anchored on the MWCNTs as confirmed by scanning electron microscopy (SEM). A cubic crystalline system is exhibited by the cobalt oxide as confirmed by the X-ray diffraction study. The Co, O, and C are the only elements present in the composite material. FTIR study has indicated the successful coupling of cobalt oxide with MWCNTs. The chemically coupled cobalt oxide onto the surface of MWCNTs composite is found highly active towards oxygen evolution reaction (OER) with a low onset potential 1.44 V versus RHE, low overpotential 262 mV at 10 mAcm(-2) and small Tafel slope 81 mV dec(-1). For continuous operation of 40 hours during durability test, no decay in activity was recorded. Electrochemical impedance study further revealed a low charge transfer resistance of 70.64 Ohms for the composite material during the electrochemical reaction and which strongly favored OER kinetics. This work provides a simple, low cost, and smartly designing electrocatalysts via hydrothermal reaction for the catalysis and energy storage applications.
|
|
7. |
- Shah, Aqeel Ahmed, et al.
(author)
-
Tin as an Effective Doping Agent into ZnO for the Improved Photodegradation of Rhodamine B
- 2021
-
In: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2529-2537
-
Journal article (peer-reviewed)abstract
- We have fabricated ZnO nano rods by hydrothermal method and successively doped them with tin (Sn) using different concentrations of 25, 50, 75 and 100 mg of tin chloride. XRD of the fabricated structures showed that ZnO possess hexagonal wurtzite phase. Scanning electron microscopy (SEM) was used to explore the morphology and it shows nanorod like morphology for all samples and no considerable change in the structural features were found. The dimension of nanorod is 200 to 300 nm. The doped materials were then investigated for their photo catalytic degradation of environmental pollutant Rhodamine B. The performance of doped ZnO is compared with the pristine ZnO. Scanning electron microscopy (SEM) was used to explore the morphology and it shows nanorod like morphology for all samples and no considerable change in the structural features were found. The dimension of nanorod is 200 to 300 nm. XRD of the fabricated structures showed that ZnO possess hexagonal wurtzite phase. Photo catalytic activity of rhodamine B was investigated under UV light and a maximum degradation efficiency of 85% was obtained. The optical property reveals the reduction in band gap of upto 17.14% for 100 mg Sn doped ZnO. The degradation is followed by the pseudo order kinetics. The produced results are unique in terms of facile synthesis of Sn doped ZnO and excellent photo degradation efficiency, therefore these materials can be used for other environmental applications.
|
|
8. |
- Yadav, Sangeeta, et al.
(author)
-
Bimetallic Hollow Nanostructures for Colorimetric Detection of Picomolar Level of Mercury.
- 2020
-
In: Journal of Nanoscience and Nanotechnology. - : Ingenta. - 1533-4880 .- 1533-4899. ; 20:2, s. 991-998
-
Journal article (peer-reviewed)abstract
- In this paper, we report the use of bimetallic hollow nanostructures (BHNS), consisting of gold and silver metals, for colorimetric detection of mercury. The sodium dodecyl sulphate (SDS)-capped BHNS were prepared by galvanic etching of silver nanoparticles (AgNPs) using gold chloride resulting in a partially hollow AgNPs with the gold layer at its surface. These BHNS were interacted with an aqueous solution of mercury ions (Hg2+) in the concentration range of 10 pM-10 mM. Interestingly, at higher concentration range (10 μM-10 mM), a noticeable change in the solution color was observed with a prominent decrease in the absorption intensity and blue-shift in the peak plasmonic wavelength. This could be attributed to (i) complexation reaction between the anionic BHNS (due to the negatively charged SDS capping) and cationic Hg2+ and (ii) oxidative etching of silver from BHNS causing its depletion and resulting into Ag-Hg amalgam and/or aggregation of the nanostructures. In contrast, at lower concentration range (i.e., 10 pM-10 nM), an increase in the absorption intensity was observed, which was possibly due to the oxidative etching of silver from BHNS without aggregation of the nanostructures. The low amount of Hg2+ was not sufficient enough to interact with SDS capping layer present on the BHNS surface, unlike the higher concentrations of mercury and therefore, did not cause any aggregation. The developed colorimetric sensor showed high sensitivity and selectivity towards Hg2+ detection with a limit of detection of 10 pM and good linearity (R² = 0.97) in the concentration range of 10 pM-10 nM.
|
|