1. |
- Casper, Robert, et al.
(author)
-
Addressing Today’s challenges in automotive remanufacturing
- 2018
-
In: Journal of Remanufacturing. - : Springer Netherlands. - 2210-4690 .- 2210-464X. ; 8, s. 93-102
-
Journal article (peer-reviewed)abstract
- Automotive remanufacturing companies are nowadays facing a wide range ofchallenges. Typical challenges from the point of view of suppliers, producers and customers.Several process steps are analysed and problem fields are dissected: From the core management,to disassembly and cleaning to machining and testing. The main fields of challengesanalysed in this paper are: the vagueness in respect of fiscal value, environmental regulationsand taxation of core parts, the important need for a continuing qualification of staff andengineers, an efficient core management, the adaption of pricing models and the competence tohandle the growing variety and complexity. The focus of this analysis lies on activities of theindependent after-market (IAM) for remanufactured products.
|
|
2. |
- Casper, Robert, et al.
(author)
-
Electrification in the automotive industry : effects in remanufacturing
- 2021
-
In: Journal of Remanufacturing. - : Springer Science and Business Media LLC. - 2210-4690 .- 2210-464X. ; 11:2, s. 121-136
-
Journal article (peer-reviewed)abstract
- The automotive market is changing. For many years, cars with internal-combustion engines were dominant. Recently, more cars with alternative drive trains have become available, and their market share has increased, a trend that has had an effect on the remanufacturing industry for automotive parts. This paper aims to describe and evaluate the challenges and opportunities in the coming years for the remanufacturing industry as a result of the increasing number and share of electric vehicles. Both theory and empirical data have been used to meet this aim. From theory, the two different drive train concepts of the internal combustion engine and the battery electric vehicle are described, along with the major differences from a remanufacturing standpoint. These differences and effects are described, evaluated, and fully or partly confirmed by industry experts. The results show that future market actors are unset today, less space-consuming machinery parks will be needed, major investments into knowledge and equipment (especially for testing) will be required, and the necessity to handle different kinds of end-of-use/life solutions, especially the recovery for the electric vehicle battery packs, will be a challenge. As future development is still uncertain, the authors recommend that market actors investigate the challenges and opportunities highlighted in this paper and watch future developments carefully.
|
|
3. |
- Lindkvist Haziri, Louise, 1982-, et al.
(author)
-
Supporting design for remanufacturing : A framework for implementing information feedback from remanufacturing to product design
- 2020
-
In: Journal of Remanufacturing. - : Springer. - 2210-464X .- 2210-4690. ; 10, s. 57-76
-
Journal article (peer-reviewed)abstract
- Remanufacturing is an industrial process turning used products into a condition of like new or better. Remanufacturing is also one strategy that salvages the value put into products during manufacturing and thus reduces the environmental impact of products over the life-cycle. However, not many products are designed for remanufacturing, and there is rarely any feedback from remanufacturing to design. Since design for remanufacturing is not applied at most manufacturing companies, there is a need to support companies, for example, by information feedback methods. By implementing feedback transfer from remanufacturing to design and employing design for remanufacturing, the remanufacturing process is more likely to be effective and efficient. The aim of this paper is to present a framework that supports design for remanufacturing by the implementation of structured feedback from remanufacturing to design. The framework aims at strategically outlining and practically implementing information feedback from remanufacturing to design. A case company where the framework has been initialised is also presented.
|
|
4. |
- Vogtlander, Joost G., et al.
(author)
-
Combined analyses of costs, market value and eco-costs in circular business models : eco-efficient value creation in remanufacturing
- 2017
-
In: Journal of Remanufacturing. - : Springer Science and Business Media LLC. - 2210-464X .- 2210-4690. ; 7:1
-
Journal article (peer-reviewed)abstract
- Eco-efficient Value Creation is a method to analyse innovative product and service design together with circular business strategies. The method is based on combined analyses of the costs, market value (perceived customer value) and eco-costs. This provides a prevention-based single indicator for ‘external environmental costs’ in LCA. The remanufacturing of products is an environmental and sustainable approach, in the circular economy, and can deliver lower eco-costs of materials depletion and pollution. From a business point of view, however, remanufacturing seems to be viable in B2B niche markets only. In consumer markets, remanufacturing is less common. The question is how can remanufacturing become a viable business solution for mainstream consumer markets. Traditional ‘green’ marketing approaches are not enough: green has a positive, but also negative connotations, so marketing approaches are complex. By using the Eco-efficient Value Creation method, marketing strategies for the roll-out of remanufacturing in mainstream consumer markets, can be revealed. This approach has led to the development of five aspects, which are key to innovative circular business models, for remanufacturing: (1) buyers differ from the buyers of the ‘new product’ (2) quality must be emphasised in all communications (3) risk must be taken away from the buyer (4) top level service is required to convince the buyer (5) a ‘green’ brand may support the remanufactured product image.
|
|
5. |
- Lind, Sebastian, et al.
(author)
-
Exploring inter-organizational relationships in automotive component remanufacturing
- 2014
-
In: Journal of Remanufacturing. - : Springer. - 2210-4690. ; 4:5
-
Journal article (peer-reviewed)abstract
- One of the industry sectors with the longest history in remanufacturing is the automotive industry. Remanufactured parts include brake calipers, engines, servo pumps and alternators. A big challenge for automotive component remanufacturers is to achieve a steady flow of cores (parts that are used for remanufacturing). This flow could be secured by making agreements with core suppliers, such as an original equipment manufacturer (OEM), a core broker or another actor in the market. The remanufacturer can also choose to collect the cores without closer collaboration with the core suppliers. One crucial aspect in choosing how to collect the cores is that it has to be lucrative.The aim of this paper is to explore how remanufacturers manage their inter-organizational relationships in the closed-loop supply chain. A case study was conducted within the European research project ‘CAN-REMAN’, and empirical data was collected from six participating companies within the project, all European small and medium-sized (SME) remanufacturers of automotive components. These companies were investigated, and their relationships, defined in earlier research with core suppliers, were evaluated.A key finding of the research is that the most problematic parameter with supplier relationships is to receive the ordered quantity of cores from the supplier. This parameter is continually ranked as one of the most important, and the participating companies also claim to have problems with it. A successful relationship and take-back system was pointed out by one of the companies to never be the owner of the actual cores, and only perform the remanufacturing activity (service) for an OEM. This new relationship, called reman-contract, is where the OEM owns the core and the remanufacturer just performs remanufacturing including some sorting and storing. It was found that with this kind of relationship, the ordered quantity of cores was fulfilled to a higher degree, and thus the challenge of achieving a steady flow of cores was met.
|
|
6. |
- A Asif, Farazee M, 1980-, et al.
(author)
-
Performance analysis of the closed loop supply chain
- 2012
-
In: Journal of Remanufacturing. - Germany : Springer Science and Business Media LLC. - 2210-4690. ; 2:4
-
Journal article (peer-reviewed)abstract
- PurposeThe question of resource scarcity and emerging pressure of environmental legislations has brought a new challenge for the manufacturing industry. On the one hand, there is a huge population that demands a large quantity of commodities; on the other hand, these demands have to be met by minimum resources and pollution. Resource conservative manufacturing (ResCoM) is a proposed holistic concept to manage these challenges. The successful implementation of this concept requires cross functional collaboration among relevant fields, and among them, closed loop supply chain is an essential domain. The paper aims to highlight some misconceptions concerning the closed loop supply chain, to discuss different challenges, and in addition, to show how the proposed concept deals with those challenges through analysis of key performance indicators (KPI).MethodsThe work presented in this paper is mainly based on the literature review. The analysis of performance of the closed loop supply chain is done using system dynamics, and the Stella software has been used to do the simulation. Findings The results of the simulation depict that in ResCoM; the performance of the closed loop supply chain is much enhanced in terms of supply, demand, and other uncertainties involved. The results may particularly be interesting for industries involved in remanufacturing, researchers in the field of closed loop supply chain, and other relevant areas. Originality The paper presented a novel research concept called ResCoM which is supported by system dynamics models of the closed loop supply chain to demonstrate the behavior of KPI in the closed loop supply chain.
|
|
7. |
- Sakao, Tomohiko, et al.
(author)
-
Understanding of a Product/Service System Design : a Holistic Approach to Support Design for Remanufacturing
- 2014
-
In: Journal of Remanufacturing. - : Springer. - 2210-4690. ; 4:1
-
Journal article (peer-reviewed)abstract
- A product/service system (PSS) facilitates remanufacturing and thus is the article’ssubject. This article presents a first quantitative analysis, through a descriptive study,of the details of a PSS design case. To do so, an example of PSS design wasconducted using a real offering in the marketplace, and this design episode wasanalyzed through protocol analysis developed further by the authors. The results ofthe analysis include reasonable hypotheses: PSS design begins with needs by andvalue for a customer, addresses primarily life cycle activities for solutions, and endsback with value. In addition, life cycle activities, which accounted for about 30% ofthe episode, were found to be given a central role within PSS design. Furthermore,reasoning about problems, which spent more than 30% of the design, seems to be anew and important type of activity in PSS design as compared to physical productdesign. This article contributes to greater understanding of PSS design process inquantitative terms and thus to developing effective support for PSS design.Knowledge about PSS enables the understanding of remanufacturing with a moreholistic perspective and thus creating an opportunity for better optimization ofremanufacturers’ activities.
|
|
8. |
- Sundin, Erik, 1974-, et al.
(author)
-
Reverse logistics challenges in remanufacturing of automotive mechatronics and electronic systems
- 2013
-
In: Journal of Remanufacturing. - : Springer. - 2210-4690. ; 3:2
-
Journal article (peer-reviewed)abstract
- The remanufacturing industry as a whole and the automotive sector in particular have, over the years, proven to be beneficial to the environment and economically lucrative to the companies involved as well as to their customers. However, remanufacturing is associated with complicating characteristics, not least to mention the process of core acquisition.The automotive industry is one of the earliest adapters of remanufacturing. Parts like engines, brake calipers and servo pumps are common targets for remanufacturing. Modern cars also have several embedded computers, often referred to as electronic control units that communicate, share information and verify each other over a Controller Area Network (CAN) bus. Due to their high value and an increasing trend in the amount of CAN bus mechatronic devices, interest in their remanufacture is growing.Previous research has shown that it is preferable that the remanufacturer is an original equipment manufacturer (OEM), or has a close relation to the OEM, in order to achieve a well-performing remanufacturing business. In the automotive industry, there are many small and medium-sized enterprises (SMEs) that perform remanufacturing; for these enterprises, the challenges to have a profitable business are even harder. This is because the OEMs will not release any information on the communication parameters and therefore will not support the independent remanufacturing business. As a consequence, the independent remanufacturers, often SMEs, have to perform substantial reverse engineering.This paper presents a qualitative research study, based on interviews at SMEs regarding challenges linked to the reverse logistics of SMEs remanufacturing and trading used automotive mechatronic devices, to identify specific challenges concerning the collection phase of automotive mechatronic remanufacturing. Challenges previously identified by researchers are confirmed, additional challenges within the collection phase are recognized, and challenges expected to arise when remanufacturing and trading automotive electronic CAN bus mechatronic devices are identified. The major concern for the involved companies when commencing future challenges is the handling, transportation and storing of cores. Even though the cores today mainly consist of mechanical devices, these challenges are still present; they are expected, however, to become even more crucial when cores contain a higher degree of mechatronic devices.
|
|
9. |
- Vogt Duberg, Johan, 1995-, et al.
(author)
-
Assessing the profitability of remanufacturing initiation: a literature review
- 2024
-
In: Journal of Remanufacturing. - : Springer. - 2210-4690. ; 14:1, s. 69-92
-
Journal article (peer-reviewed)abstract
- Remanufacturing has been modelled extensively from an economic perspective. However, there are relatively few studies focusing on models that consider the implementation difficulties in industry, such as data availability and model transparency. This paper aims to identify how remanufacturing initiations can be economically assessed with models particularly suitable for industry. These models should contribute to disseminating the know-how about initiating remanufacturing to transit industries towards more circular product flows. To fulfil this aim, a systematic literature review was conducted. The search resulted in a total of 964 papers published till August 2021. The results show that assessment models could be categorised into a two-dimensional framework indicating the level of computer support needed to handle the models and the level of data requirements to use the models, both of which are considered essential in the industrial implementation of the models. The review revealed and structured a further need for research on assessing remanufacturing initiation profitability, especially on economic assessment models designed to assist industries without previous remanufacturing knowledge in such an initiation.
|
|
10. |
- Wei, Shuoguo, et al.
(author)
-
Core (product) Acquisition Management for remanufacturing : a review
- 2015
-
In: Journal of Remanufacturing. - : Springer. - 2210-4690. ; :4
-
Research review (peer-reviewed)abstract
- Core acquisition is essential for the success of remanufacturing business. To describe the current status of the quantitative research in Core Acquisition Management and to indicate possible future research directions, a literature review is conducted in this paper about the quantitative modeling in Core Acquisition Management research area. The activities included in Core Acquisition Management are categorized into topics such as acquisition control, forecasting return, return strategies, quality classification and reverse channel design. While most of the studies focus on acquisition control, studies on return strategies and return forecast are relatively limited. Furthermore, this paper analyzes the research papers according to the key assumptions such as, hybrid/non-hybrid remanufacturing systems, acquisition functions, quality classification methods and perfect/imperfect substitutions. In conclusion, studies based on the assumptions of non-hybrid remanufacturing systems and imperfect substitution should gain more attentions, since these situations frequently occur in practice but are less investigated in the existing literature. In addition, empirical validation of the various forms of the acquisition function (relations between acquisition incentives and acquisition volume) should be important for further investigations.
|
|