1. |
- Abe, K., et al.
(author)
-
J-PARC Neutrino Beamline Upgrade Technical Design Report
- 2019
-
Reports (peer-reviewed)abstract
- In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to 2×1022 protons-on-target in the next decade, aiming at an initial observation of CP violation with 3σ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described.
|
|
2. |
- Carmona-Gutierrez, D., et al.
(author)
-
Guidelines and recommendations on yeast cell death nomenclature
- 2018
-
In: Microbial Cell. - : Shared Science Publishers OG. - 2311-2638. ; 5:1, s. 4-31
-
Research review (peer-reviewed)abstract
- Elucidating the biology of yeast in its full complexity has major implications for science, medicine and industry. One of the most critical processes determining yeast life and physiology is cellular demise. However, the investigation of yeast cell death is a relatively young field, and a widely accepted set of concepts and terms is still missing. Here, we propose unified criteria for the definition of accidental, regulated, and programmed forms of cell death in yeast based on a series of morphological and biochemical criteria. Specifically, we provide consensus guidelines on the differential definition of terms including apoptosis, regulated necrosis, and autophagic cell death, as we refer to additional cell death routines that are relevant for the biology of (at least some species of) yeast. As this area of investigation advances rapidly, changes and extensions to this set of recommendations will be implemented in the years to come. Nonetheless, we strongly encourage the authors, reviewers and editors of scientific articles to adopt these collective standards in order to establish an accurate framework for yeast cell death research and, ultimately, to accelerate the progress of this vibrant field of research.
|
|
3. |
- Antonova, M., et al.
(author)
-
Baby MIND : a magnetized segmented neutrino detector for the WAGASCI experiment
- 2017
-
In: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 12
-
Journal article (peer-reviewed)abstract
- T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. Anear detector complex (ND280) is located 280m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.
|
|
4. |
- Antonova, M., et al.
(author)
-
Synchronization of the distributed readout frontend electronics of the Baby MIND detector
- 2017
-
In: 2017 XXVI International Scientific Conference Electronics (ET). - : IEEE. - 9781538617533
-
Conference paper (peer-reviewed)abstract
- Baby MIND is a new downstream muon range detector for the WGASCI experiment. This article discusses the distributed readout system and its timing requirements. The paper presents the design of the synchronization subsystem and the results of its test.
|
|
5. |
|
|
6. |
- Antonova, M., et al.
(author)
-
Baby MIND : a magnetized segmented neutrino detector for the WAGASCI experiment
- 2017
-
In: Journal of Instrumentation. - : Institute of Physics (IOP). - 1748-0221. ; 12:07, s. 1-6
-
Journal article (peer-reviewed)abstract
- T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280 m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280’s measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.
|
|
7. |
- Antonova, M., et al.
(author)
-
Proposal for characterization of muon spectrometers for neutrino beam lines with the Baby MIND
- 2015
-
Reports (other academic/artistic)abstract
- Neutrino detectors based on state-of-the-art plastic scintillators read out with solid state photo-sensors, as well as new magnetization schemes, have been developed in the framework of AIDA. Meaningful size prototypes are under construction. In the framework of the CERN neutrino platform, we propose to test a Totally Active Scintillator Detector (TASD) and a prototype of a Magnetized Iron Neutrino Detector (MIND), called Baby MIND in the H8 beam line in 2016-2018. The design of the detectors and the purpose and plans for the beam tests are presented. An opportunity to use the Baby MIND detector in a real neutrino beam at JPARC for the measurement of the cross-section ratio between Water and scintillator (WAGASCI experiment) is described.
|
|
8. |
- Bonamy, AKE, et al.
(author)
-
Wide variation in severe neonatal morbidity among very preterm infants in European regions
- 2019
-
In: Archives of disease in childhood. Fetal and neonatal edition. - : BMJ. - 1468-2052 .- 1359-2998. ; 104:1, s. F36-F45
-
Journal article (peer-reviewed)abstract
- To investigate the variation in severe neonatal morbidity among very preterm (VPT) infants across European regions and whether morbidity rates are higher in regions with low compared with high mortality rates.DesignArea-based cohort study of all births before 32 weeks of gestational age.Setting16 regions in 11 European countries in 2011/2012.PatientsSurvivors to discharge from neonatal care (n=6422).Main outcome measuresSevere neonatal morbidity was defined as intraventricular haemorrhage grades III and IV, cystic periventricular leukomalacia, surgical necrotizing enterocolitis and retinopathy of prematurity grades ≥3. A secondary outcome included severe bronchopulmonary dysplasia (BPD), data available in 14 regions. Common definitions for neonatal morbidities were established before data abstraction from medical records. Regional severe neonatal morbidity rates were correlated with regional in-hospital mortality rates for live births after adjustment on maternal and neonatal characteristics.Results10.6% of survivors had a severe neonatal morbidity without severe BPD (regional range 6.4%–23.5%) and 13.8% including severe BPD (regional range 10.0%–23.5%). Adjusted inhospital mortality was 13.7% (regional range 8.4%–18.8%). Differences between regions remained significant after consideration of maternal and neonatal characteristics (P<0.001) and severe neonatal morbidity rates were not correlated with mortality rates (P=0.50).ConclusionSevere neonatal morbidity rates for VPT survivors varied widely across European regions and were independent of mortality rates.
|
|
9. |
|
|
10. |
- Testa, D., et al.
(author)
-
LTCC magnetic sensors at EPFL and TCV: Lessons learnt for ITER
- 2019
-
In: Fusion Engineering and Design. - : Elsevier BV. - 0920-3796. ; 146, s. 1553-1558
-
Journal article (peer-reviewed)abstract
- Innovative 3D high-frequency magnetic sensors have been designed and manufactured in-house for installation on the Tokamak a Configuration Variable (TCV), and are currently routinely operational. These sensors combine the Low Temperature Co-fired Ceramic (LTCC) and the thick-film technologies, and are in various aspects similar to the majority of the inductive magnetic sensors currently being procured for ITER (290 out of 505 are LTCC-1D). The TCV LTCC-3D magnetic sensors provide measurements in the frequency range up to 1MHz of the perturbations to the toroidal (quasi-parallel: delta B-TOR(similar to)delta B-PAR), vertical (quasi-poloidal: delta B-V(ER)similar to delta B-PO(L)), and radial (delta B-RAD) magnetic field components, the latter being generally different from the component normal to the Last Closed Flux-Surface (delta B-NOR). The LTCC-3D delta B-RAD measurements improve significantly on the corresponding data with the saddle loops, which are mounted onto the wall and have a bandwidth of (similar to)3 kHz (due to the wall penetration time). The LTCC-3D delta B-TOR measurements (not previously available in TCV) provide evidence that certain MHD modes have a finite delta B-P(AR) at the LCFS, as recently calculated for pressure-driven instabilities. The LTCC-3D delta B-PO(L) measurements allow to cross-check the data obtained with the Mirnov coils, and led to the identification of large EM noise pick-up for the Mirnov DAQ. The LTCC-3D data for delta B-POL agree with those obtained with the Mirnov sensors in the frequency range where the respective data acquisition overlap, routinely up to 125kHz, and up to 250kHz in some discharges, when the EM noise pick-up on the Mirnov DAQ is removed. Finally, we look at what lessons can be learnt from our work for the forthcoming procurement, installation and operation of the LTCC-1D sensors in ITER.
|
|