| 1. |
- Bolmstedt, Jon, et al.
(author)
-
A benchmark study of controlled emptying of equalization basins
- 2005
-
In: Water Science and Technology. - 0273-1223. ; 52:12, s. 113-121
-
Journal article (peer-reviewed)abstract
- Storm tanks, or equalization basins, have been used for many years in sewer or wastewater treatment systems to reduce the amount of combined sewer overflows. In this paper, a systematic control of an equalization basin is used not only to dampen or reduce the hydraulic load, but also to systematically improve the effluent quality in a nitrogen removal plant. It is demonstrated that the effluent ammonia concentration is the key component. The Benchmark Simulation Model 1, implemented in MATLAB/Simulink, has been used to perform the evaluations. It has been extended with systematic rainfall generations. Intuitively, it is apparent that the equalization basin should be emptied before a rainfall. This requires a prediction capacity. It is shown that the choice of prediction time is by no means trivial and it is not true that a long prediction horizon is a,ways advantageous.
|
|
| 2. |
|
|
| 3. |
- Bolmstedt, Jon
(author)
-
Controlling the Influent Load to Wastewater Treatment Plants
- 2004
-
Licentiate thesis (other academic/artistic)abstract
- The need for control of the influent load to a wastewater treatment plant (WWTP) is becoming more important. One reason for this is that there are a number of things that cannot be achieved with plant-focused control. For instance it is hard to avoid sludge loss as a result of poor settling or reducing a too high influent flow rate by in-plant control actions. It is also difficult to reduce the effects of a toxin in the influent, if the entire influent is to be biologically treated. Optimisation of the various parts of the collection system, with respect to locally defined objectives, may be counter-productive as it may increase the effluent loads when taking the whole system into account. This is typically the case as optimisation of the control of the sewer net with respect to combined sewer overflows (CSOs) leads to an increased flow to the WWTP. Equalization basins are used to control the flow rate or the load in the sewer net as well as at the WWTPs. The focus has recently been shifted from only reducing the amount of CSOs to reduce the effluent load from the sewer and the WWTP. To minimize the total load from the system the methods previously used to optimise the individual sub-systems must be used together and information from various parts of the system should be available system wide. Due to the cost associated with the construction of equalization basins, the current approach is to increase storage volume by constructing and controlling gates in the sewer net. The potential of system wide control is difficult to estimate, which is exemplified by a discussion on some existing implementations. In this thesis an equalization basin is modelled and used with an existing model of a WWTP. This system is operated with some commonly applied control strategies of equalization basins to estimate the result of control during ideal conditions. Without control of the basin, the possible benefit of construction, or providing an equal amount of storage capacity in the sewer net, is evaluated.
|
|
| 4. |
|
|
| 5. |
|
|
