| 1. |
- Al-Amiry, Bariq, 1976-, et al.
(author)
-
Does body mass index affect restoration of femoral offset, leg length and cup positioning after total hip arthroplasty? : a prospective cohort study
- 2019
-
In: BMC Musculoskeletal Disorders. - : BioMed Central (BMC). - 1471-2474. ; 20
-
Journal article (peer-reviewed)abstract
- Background: In obese patients, total hip arthroplasty (THA) can be technically demanding with increased perioperative risks. The aim of this prospective cohort study is to evaluate the effect of body mass index (BMI) on radiological restoration of femoral offset (FO) and leg length as well as acetabular cup positioning.Methods: In this prospective study, patients with unilateral primary osteoarthritis (OA) treated with THA between September 2010 and December 2013 were considered for inclusion. The perioperative plain radiographs were standardised and used to measure the preoperative degree of hip osteoarthritis, postoperative FO, leg length discrepancy (LLD), acetabular component inclination and anteversion.Results: We included 213 patients (74.5% of those considered for inclusion) with a mean BMI of 27.7 (SD 4.5) in the final analysis. The postoperative FO was improper in 55% and the LLD in 15%, while the cup inclination and anteversion were improper in 13 and 23% of patients respectively. A multivariable logistic regression model identified BMI as the only factor that affected LLD. Increased BMI increased the risk of LLD (OR 1.14, 95% CI 1.04 to 1.25). No other factors included in the model affected any of the primary or secondary outcomes.Conclusion: Increased BMI showed a negative effect on restoration of post-THA leg length but not on restoration of FO or positioning of the acetabular cup. Age, gender, OA duration or radiological severity and surgeon’s experience showed no relation to post-THA restoration of FO, leg length or cup positioning.
|
|
| 2. |
- Al-Amiry, Bariq, 1976-
(author)
-
Radiological measurements in total hip arthroplasty
- 2018
-
Doctoral thesis (other academic/artistic)abstract
- Every year, about 1 million patients worldwide and 20000 patients in Sweden undergo total hip arthroplasty (THA). This type of operation is considered a successful, safe and cost-effective procedure to regain mobility and restore hip joint function in patients suffering from severe hip joint disease or trauma. The main goals of the operation are to relief the pain, improve quality of life (QoL) and to restore the biomechanical forces around the hip with appropriate femoral offset (FO), leg length and proper component position and orientation. The radiographic preoperative planning and postoperative evaluation of these parameters require good validity, interobserver reliability and intraobserver reproducibility. Most patients are satisfied after THA, although this treatment still has its complications. About 10 % of THA patients report persistent pain and suboptimal functional outcome and QoL at long-term follow-up. The absolute number of dissatisfied patients is expected to rise given the increase in the annual number of THA performed. Therefore, every effort should be made to investigate factors that possibly influence THA outcome. The data available about the influence of preoperative radiological severity and symptom duration of OA on the outcome of THA are scarce and contradictory. Further studies even needed to evaluate the effect of obesity on post-operative THA radiological measurements
|
|
| 3. |
- Al-Amiry, Bariq Sh. 1976-, et al.
(author)
-
The Influence of Radiological Severity and Symptom Duration of Osteoarthritis on Postoperative Outcome After Total Hip Arthroplasty : A Prospective Cohort Study
- 2018
-
In: The Journal of Arthroplasty. - : CHURCHILL LIVINGSTONE INC MEDICAL PUBLISHERS. - 0883-5403 .- 1532-8406. ; 33:2, s. 436-440
-
Journal article (peer-reviewed)abstract
- Background: We aimed to investigate the influence of preoperative radiological severity and symptom duration of hip osteoarthritis (OA) on the postoperative functional outcome, quality of life, as well as abductor muscle strength after total hip arthroplasty (THA). Methods: In this prospective cohort study, we studied 250 patients. Preoperatively, we evaluated the function with the Western Ontario and McMaster Universities Osteoarthritis (WOMAC) index and quality of life with euroqol-5D (EQ-5D). At 1 year after THA, the same scores and also hip abductor muscle strength were measured in 222 patients. We divided the cohort twice, first according to the radiological OA severity [Kellgren-Lawrence classification (KL)] and then according to the OA symptom duration. We investigated whether the preoperative KL class and symptom duration influenced the 1-year WOMAC (primary outcome measure) or EQ-5D and abductor muscle strength (secondary outcome measures). Results: The crude results showed that KL class and symptom duration had no influence (P = .90 and P = .20, respectively) on the 1-yearWOMAC. Younger age, male gender, and lower body mass index were associated with a better function. Regarding 1-year EQ-5D, the crude results showed that body mass index and KL class had no influence (P = .83 and P = .39, respectively). The adjusted results showed that only age and gender influenced the postoperative EQ-5D. No influence of the tested factors was found on the 1-year abductor muscle strength. Conclusion: Preoperative radiological OA severity and symptom duration had no influence on the outcome of THA and should probably not affect the decision about timing the operative intervention.
|
|
| 4. |
- Barrefelt, Asa, et al.
(author)
-
Fluorescence labeled microbubbles for multimodal imaging
- 2015
-
In: Biochemical and Biophysical Research Communications - BBRC. - : Elsevier BV. - 0006-291X .- 1090-2104. ; 464:3, s. 737-742
-
Journal article (peer-reviewed)abstract
- Air-filled polyvinyl alcohol microbubbles (PVA-MBs) were recently introduced as a contrast agent for ultrasound imaging. In the present study, we explore the possibility of extending their application in multimodal imaging by labeling them with a near infrared (NIR) fluorophore, VivoTag-680. PVA-MBs were injected intravenously into FVB/N female mice and their dynamic biodistribution over 24 h was determined by 3D-fluorescence imaging co-registered with 3D-mu CT imaging, to verify the anatomic location. To further confirm the biodistribution results from in vivo imaging, organs were removed and examined histologically using bright field and fluorescence microscopy. Fluorescence imaging detected PVA-MB accumulation in the lungs within the first 30 min post-injection. Redistribution to a low extent was observed in liver and kidneys at 4 h, and to a high extent mainly in the liver and spleen at 24 h. Histology confirmed PVA-MB localization in lung capillaries and macrophages. In the liver, they were associated with Kupffer cells; in the spleen, they were located mostly within the marginal-zone. Occasional MBs were observed in the kidney glomeruli and interstitium. The potential application of PVA-MBs as a contrast agent was also studied using ultrasound (US) imaging in subcutaneous and orthotopic pancreatic cancer mouse models, to visualize blood flow within the tumor mass. In conclusion, this study showed that PVA-MBs are useful as a contrast agent for multimodal imaging. (C) 2015 Elsevier Inc. All rights reserved.
|
|
| 5. |
|
|
| 6. |
- Gärdin, Anna, et al.
(author)
-
T2 * relaxation time in Achilles tendinosis and controls and its correlation with clinical score
- 2016
-
In: Journal of Magnetic Resonance Imaging. - : Wiley. - 1053-1807 .- 1522-2586. ; 43:6, s. 1417-1422
-
Journal article (peer-reviewed)abstract
- PURPOSE: To investigate if the T2 * of Achilles tendons can discriminate between chronic Achilles tendinosis and healthy controls; to correlate with clinical score; to evaluate its short-term repeatability; and to estimate minimal detectable change.MATERIALS AND METHODS: Twenty patients, with chronic mid-portion Achilles tendinosis, and 10 controls without history of Achilles tendon symptoms, were examined with a 3T MR scanner with a 3D flash ultrashort time to echo sequence with five different echo times. The sequence was run twice to test repeatability. The tendon border was delineated on axial slices at three different levels in the calculated T2 * maps. The clinical severity of Achilles tendinosis was measured by a VISA-A questionnaire.RESULTS: There was a significant difference in mean T2 * between symptomatic and control tendons (P < 0.001). In patients with unilateral symptoms no significant difference in T2 * was found between symptomatic and contralateral asymptomatic tendons (P = 0.19). There was no significant correlation between clinical severity and T2 * (r = -0.28, P = 0.22). The short-term repeatability of T2 * showed a coefficient of variation of 18%, a least significant change of 50%, and the intraclass correlation coefficient had an average consistency of 0.99.CONCLUSION: T2 * may help to differentiate between chronic Achilles tendinosis and healthy controls but was not associated with the clinical score. However, and notably, the reproducibility of the method was low and the number of patients was small.
|
|
| 7. |
- Jakola, Asgeir Store, et al.
(author)
-
Quantitative texture analysis in the prediction of IDH status in low-grade gliomas.
- 2018
-
In: Clinical neurology and neurosurgery. - : Elsevier BV. - 1872-6968 .- 0303-8467. ; 164, s. 114-120
-
Journal article (peer-reviewed)abstract
- Molecular markers provide valuable information about treatment response and prognosis in patients with low-grade gliomas (LGG). In order to make this important information available prior to surgery the aim of this study was to explore if molecular status in LGG can be discriminated by preoperative magnetic resonance imaging (MRI).All patients with histopathologically confirmed LGG with available molecular status who had undergone a preoperative standard clinical MRI protocol using a 3T Siemens Skyra scanner during 2008-2015 were retrospectively identified. Based on Haralick texture parameters and the segmented LGG FLAIR volume we explored if it was possible to predict molecular status.In total 25 patients (nine women, average age 44) fulfilled the inclusion parameters. The textural parameter homogeneity could discriminate between LGG patients with IDH mutation (0.12, IQR 0.10-0.15) and IDH wild type (0.07, IQR 0.06-0.09, p=0.005). None of the other four analyzed texture parameters (energy, entropy, correlation and inertia) were associated with molecular status. Using ROC curves, the area under curve for predicting IDH mutation was 0.905 for homogeneity, 0.840 for tumor volume and 0.940 for the combined parameters of tumor volume and homogeneity. We could not predict molecular status using the four other chosen texture parameters (energy, entropy, correlation and inertia). Further, we could not separate LGG with IDH mutation with or without 1p19q codeletion.In this preliminary study using Haralick texture parameters based on preoperative clinical FLAIR sequence, the homogeneity parameter could separate IDH mutated LGG from IDH wild type LGG. Combined with tumor volume, these diagnostic properties seem promising.
|
|
| 8. |
- Jefferson, Amanda, et al.
(author)
-
Clinical Guidelines for Management of Bone Health in Rett Syndrome Based on Expert Consensus and Available Evidence
- 2016
-
In: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 11:2
-
Journal article (peer-reviewed)abstract
- ObjectivesWe developed clinical guidelines for the management of bone health in Rett syndrome through evidence review and the consensus of an expert panel of clinicians.MethodsAn initial guidelines draft was created which included statements based upon literature review and 11 open-ended questions where literature was lacking. The international expert panel reviewed the draft online using a 2-stage Delphi process to reach consensus agreement. Items describe the clinical assessment of bone health, bone mineral density assessment and technique, and pharmacological and non-pharmacological interventions.ResultsAgreement was reached on 39 statements which were formulated from 41 statements and 11 questions. When assessing bone health in Rett syndrome a comprehensive assessment of fracture history, mutation type, prescribed medication, pubertal development, mobility level, dietary intake and biochemical bone markers is recommended. A baseline densitometry assessment should be performed with accommodations made for size, with the frequency of surveillance determined according to individual risk. Lateral spine x-rays are also suggested. Increasing physical activity and initiating calcium and vitamin D supplementation when low are the first approaches to optimizing bone health in Rett syndrome. If individuals with Rett syndrome meet the ISCD criterion for osteoporosis in children, the use of bisphosphonates is recommended.ConclusionA clinically significant history of fracture in combination with low bone densitometry findings is necessary for a diagnosis of osteoporosis. These evidence and consensus-based guidelines have the potential to improve bone health in those with Rett syndrome, reduce the frequency of fractures, and stimulate further research that aims to ameliorate the impacts of this serious comorbidity.
|
|
| 9. |
- Klintström, Eva, et al.
(author)
-
Clinical dental cone beam computed tomography - a tool for monitoring trabecular bone structure?
- 2015
-
Conference paper (peer-reviewed)abstract
- PurposeThe aim of this in vitro study was to develop a method for quantitative assessment of trabecular bone micro-architecture by using three-dimensional image processing. The imaging data were acquired with cone beam computed tomography (CBCT), traditionally used for facial and temporal bone imaging but also applicable for peripheral skeleton, and with a dedicated high resolution peripheral computed tomograph (HRpQCT), used for in vivo measurements in bone research. The data from micro-computed tomography (µCT) was used as reference. Methods & Materials15 bone samples from the radius, were examined by CBCT and HRpQCT at a resolution of 80 and 82 µm, respectively. After segmentation, the bone structure parameters bone volume (BV/TV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular number (Tb.N), trabecular nodes (Tb.Nd) and trabecular termini (Tb.Tm) were quantified. Calculations were performed on an ordinary PC using a MATLAB developed in house. ResultsCBCT and HRpQCT overestimated BV/TV and Tb.Th approximately three times, compared to µCT. On the other hand Tb.Nd was highly underestimated. All parameters from CBCT were strongly correlated to µCT, with correlation coefficients above 0.91 for all studied parameters (0.92-0.98) except for Tb.Tm with a correlation of 0.83. For HRpQCT the correlations were slightly weaker, varying from 0.78 to 0.95. ConclusionThe strong correlations between bone structure parameters computed from CBCT and µCT suggests that CBCT may be a good alternative to HRpQCT for monitoring trabecular bone microarchitecture in vivo.
|
|
| 10. |
- Klintström, Eva, et al.
(author)
-
Direct estimation of human trabecular bone stiffness using cone beam computed tomography
- 2018
-
In: Oral surgery, oral medicine, oral pathology and oral radiology. - : ELSEVIER SCIENCE INC. - 2212-4403 .- 2212-4411. ; 126:1, s. 72-82
-
Journal article (peer-reviewed)abstract
- Objectives. The aim of this study was to evaluate the possibility of estimating the biomechanical properties of trabecular bone through finite element simulations by using dental cone beam computed tomography data. Study Design. Fourteen human radius specimens were scanned in 3 cone beam computed tomography devices: 3-D Accuitomo 80 (J. Morita MFG., Kyoto, Japan), NewTom 5 G (QR Verona, Verona, Italy), and Verity (Planmed, Helsinki, Finland). The imaging data were segmented by using 2 different methods. Stiffness (Young modulus), shear moduli, and the size and shape of the stiffness tensor were studied. Corresponding evaluations by using micro-CT were regarded as the reference standard. Results. The 3-D Accuitomo 80 (J. Morita MFG., Kyoto, Japan) showed good performance in estimating stiffness and shear moduli but was sensitive to the choice of segmentation method. Newtom 5 G (QR Verona, Verona, Italy) and Verity (Planmed, Helsinki, Finland) yielded good correlations, but they were not as strong as Accuitomo 80 U. Morita MFG., Kyoto, Japan). The cone beam computed tomography devices overestimated both stiffness and shear compared with the micro-CT estimations. Conclusions. Finite element-based calculations of biomechanics from cone beam computed tomography data are feasible, with strong correlations for the Accuitomo 80 scanner a. Morita MFG., Kyoto, Japan) combined with an appropriate segmentation method. Such measurements might be useful for predicting implant survival by in vivo estimations of bone properties.
|
|
