1. |
- Abdesselam, A., et al.
(author)
-
Engineering for the ATLAS SemiConductor Tracker (SCT) end-cap
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3
-
Journal article (peer-reviewed)abstract
- The ATLAS SemiConductor Tracker (SCT) is a silicon-strip tracking detector which forms part of the ATLAS inner detector. The SCT is designed to track charged particles produced in proton-proton collisions at the Large Hadron Collider (LHC) at CERN at an energy of 14 TeV. The tracker is made up of a central barrel and two identical end-caps. The barrel contains 2112 silicon modules, while each end-cap contains 988 modules. The overall tracking performance depends not only on the intrinsic measurement precision of the modules but also on the characteristics of the whole assembly, in particular, the stability and the total material budget. This paper describes the engineering design and construction of the SCT end-caps, which are required to support mechanically the silicon modules, supply services to them and provide a suitable environment within the inner detector. Critical engineering choices are highlighted and innovative solutions are presented - these will be of interest to other builders of large-scale tracking detectors. The SCT end-caps will be fully connected at the start of 2008. Further commissioning will continue, to be ready for proton-proton collision data in 2008.
|
|
2. |
- Aaron, F. D., et al.
(author)
-
Multi-leptons with high transverse momentum at HERA
- 2009
-
In: Journal of High Energy Physics. - : Springer Science and Business Media LLC. - 1029-8479. ; :10
-
Journal article (peer-reviewed)abstract
- Events with at least two high transverse momentum leptons (electrons or muons) are studied using the H1 and ZEUS detectors at HERA with an integrated luminosity of 0.94 fb(-1). The observed numbers of events are in general agreement with the Standard Model predictions. Seven di- and tri-lepton events are observed in e(+)p collision data with a scalar sum of the lepton transverse momenta above 100 GeV while 1.94 +/- 0.17 events are expected. Such events are not observed in e(-)p collisions for which 1.19 +/- 0.12 are predicted. Total visible and differential di-electron and di-muon photoproduction cross sections are extracted in a restricted phase space dominated by photon-photon collisions.
|
|
3. |
- Abdesselam, A., et al.
(author)
-
The ATLAS semiconductor tracker end-cap module
- 2007
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 575:3, s. 353-389
-
Journal article (peer-reviewed)abstract
- The challenges for the tracking detector systems at the LHC are unprecedented in terms of the number of channels, the required read-out speed and the expected radiation levels. The ATLAS Semiconductor Tracker. (SCT) end-caps have a total of about 3 million electronics channels each reading out every 25 ns into its own on-chip 3.3 mu s buffer. The highest anticipated dose after 10 years operation is 1.4x10(14) cm(-2) in units of 1 MeV neutron equivalent (assuming the damage factors scale with the non-ionising energy loss). The forward tracker has 1976 double-sided modules, mostly of area similar to 70 cm(2), each having 2 x 768 strips read out by six ASICs per side. The requirement to achieve an average perpendicular radiation length of 1.5% X-0, while coping with up to 7 W dissipation per module (after irradiation), leads to stringent constraints on the thermal design. The additional requirement of 1500e(-) equivalent noise charge (ENC) rising to only 1800e(-) ENC after irradiation, provides stringent design constraints on both the high-density Cu/Polyimide flex read-out circuit and the ABCD3TA read-out ASICs. Finally, the accuracy of module assembly must not compromise the 16 mu m (r phi) resolution perpendicular to the strip directions or 580 mu m radial resolution coming from the 40 mrad front-back stereo angle. A total of 2210 modules were built to the tight tolerances and specifications required for the SCT. This was 234 more than the 1976 required and represents a yield of 93%. The component flow was at times tight, but the module production rate of 40-50 per week was maintained despite this. The distributed production was not found to be a major logistical problem and it allowed additional flexibility to take advantage of where the effort was available, including any spare capacity, for building the end-cap modules. The collaboration that produced the ATLAS SCT end-cap modules kept in close contact at all times so that the effects of shortages or stoppages at different sites could be rapidly resolved.
|
|
4. |
- Abdesselam, A., et al.
(author)
-
The barrel modules of the ATLAS semiconductor tracker
- 2006
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 568:2, s. 642-671
-
Journal article (peer-reviewed)abstract
- This paper describes the silicon microstrip modules in the barrel section of the SemiConductor Tracker (SCT) of the ATLAS experiment at the CERN Large Hadron Collider (LHC). The module requirements, components and assembly techniques are given, as well as first results of the module performance on the fully assembled barrels that make up the detector being installed in the ATLAS experiment.
|
|
5. |
- Kröll, T., et al.
(author)
-
Transfer Reactions on Neutron-rich Nuclei at REX-ISOLDE
- 2009
-
In: AIP Conference Proceedings. - 1551-7616 .- 0094-243X. ; 1165, s. 363-368 461
-
Conference paper (peer-reviewed)abstract
- We report on one- and two-neutron transfer reactions to study the single-particle properties of nuclei at the border of the "island of inversion". The (d,p)- and (t,p)-reactions in inverse kinematics on the neutron-rich isotope Mg-30, delivered as radioactive beam by the REX-ISOLDE facility, have been investigated. The outgoing protons have been detected and identified by a newly built array of Si detectors. The gamma-decay of excited states has been detected in coincidence by the MINIBALL array. First results for Mg-31 and from the search for the second, spherical, 0(+) state in Mg-32 are presented.
|
|
6. |
- Alwall, J., et al.
(author)
-
A standard format for Les Houches Event Files
- 2007
-
In: Computer Physics Communications. - : Elsevier BV. - 0010-4655. ; 176:4, s. 300-304
-
Journal article (peer-reviewed)abstract
- A standard file format is proposed to store process and event information, primarily output from partoti-level event generators for further use by general-purpose ones. The information content is identical with what was already defined by the Les Houches Accord five years ago, but then in terms of Fortran commonblocks. This information is embedded in a minimal XML-style structure, for clarity and to simplify parsing.
|
|
7. |
- Buttar, C.M., et al.
(author)
-
The Underlying Event
- 2005
-
In: HERA and the LHC: A Workshop on the implications of HERA for LHC physics.
-
Conference paper (other academic/artistic)
|
|
8. |
- Buttar, C, et al.
(author)
-
Introduction to multi-jet final states and energy flows
- 2006
-
In: CERN Reports. - 0007-8328. ; CERN-2005-014, s. 183-191
-
Conference paper (other academic/artistic)abstract
- We summarize the activities of Working Group 2 of the HERA/LHC Workshop dealing with multi-jet final states and energy flows. Among the more specific topics considered were underlying event and minimum bias, rapidity gaps and survival probabilities, multi-jet topologies and multi-scale QCD, and parton shower–matrix element matching.
|
|