1. |
- Abbondanza, Giuseppe, 1991, et al.
(author)
-
Au-Pd Barcode Nanowires with Tailored Lattice Parameters and Segment Lengths for Catalytic Applications
- 2024
-
In: ACS Applied Nano Materials. - 2574-0970. ; 7:4, s. 3861-3874
-
Journal article (peer-reviewed)abstract
- In this study, we present a systematic investigation of the controlled fabrication of Au-Pd barcode nanowires within nanoporous anodic aluminum oxide (NP-AAO) templates. By using a combination of in situ X-ray diffraction (XRD), focused ion beam scanning electron microscopy (FIB-SEM), and transmission electron microscopy (TEM), we elucidate the influence of template preparation methods on the resulting nanowire properties. The template treatment, involving either pore widening or barrier layer thinning, significantly impacts nanowire growth. Through the analysis of the XRD data, we observe sequential deposition of Au and Pd segments with lattice parameter variations and strain effects. Particularly, the lattice parameters of Au and Pd segments display intricate temporal dependencies, influenced by interfacial effects and strain caused by growth under confinement. FIB-SEM imaging reveals uniform and reproducible nanowire lengths in the template treated with pore widening. Furthermore, TEM analysis confirms the presence of distinct Au and Pd segments, while scanning TEM-energy-dispersive X-ray spectroscopy revealed minor evidence of interdiffusion between the first and the second electrodeposited segments. Our findings emphasize the potential of the electrodeposition process within nanoporous templates for producing barcode nanowires with precise segmental properties. The combination of in situ XRD and electron microscopy offers valuable insights into the growth dynamics and structural characteristics of the fabricated Au-Pd barcode nanowires. This controlled fabrication strategy opens doors to tailoring nanowire properties for diverse applications, particularly in catalysis.
|
|
2. |
- Abbondanza, Giuseppe, et al.
(author)
-
Quantitative powder diffraction using a (2 + 3) surface diffractometer and an area detector
- 2021
-
In: Journal of Applied Crystallography. - 1600-5767. ; 54:4, s. 1140-1152
-
Journal article (peer-reviewed)abstract
- X-ray diffractometers primarily designed for surface X-ray diffraction are often used to measure the diffraction from powders, textured materials and fiber-texture samples in 2θ scans. Unlike in high-energy powder diffraction, only a fraction of the powder rings is typically measured, and the data consist of many detector images across the 2θ range. Such diffractometers typically scan in directions not possible on a conventional laboratory diffractometer, which gives enhanced control of the scattering vector relative to the sample orientation. There are, however, very few examples where the measured intensity is directly used, such as for profile/Rietveld refinement, as is common with other powder diffraction data. Although the underlying physics is known, converting the data is time consuming and the appropriate corrections are dispersed across several publications, often not with powder diffraction in mind. This paper presents the angle calculations and correction factors required to calculate meaningful intensities for 2θ scans with a (2 + 3)-type diffractometer and an area detector. Some of the limitations with respect to texture, refraction and instrumental resolution are also discussed, as is the kind of information that one can hope to obtain.
|
|
3. |
- Abbondanza, Giuseppe, et al.
(author)
-
Templated electrodeposition as a scalable and surfactant-free approach to the synthesis of Au nanoparticles with tunable aspect ratios
- 2022
-
In: Nanoscale Advances. - : Royal Society of Chemistry. - 2516-0230. ; 4:11, s. 2452-2467
-
Journal article (peer-reviewed)abstract
- A high-throughput method for the fabrication of ordered arrays of Au nanoparticles is presented. It is based on pulsed electrodeposition into porous anodic alumina templates. In contrast to many synthesis routes, it is cyanide-free, prior separation of the alumina template from the aluminium substrate is not required, and the use of contaminating surfactants/capping agents often found in colloidal synthesis is avoided. The aspect ratio of the nanoparticles can also be tuned by selecting an appropriate electrodeposition time. We show how to fabricate arrays of nanoparticles, both with branched bases and with hemispherical bases. Furthermore, we compare the different morphologies produced with electron microscopies and grazing-incidence synchrotron X-ray diffraction. We find the nanoparticles are polycrystalline in nature and are compressively strained perpendicular to the direction of growth, and expansively strained along the direction of growth. We discuss how this can produce dislocations and twinning defects that could be beneficial for catalysis.
|
|
4. |
- Arthur Hvidtfeldt, Ulla, et al.
(author)
-
Long-term exposure to fine particle elemental components and lung cancer incidence in the ELAPSE pooled cohort
- 2021
-
In: Environmental Research. - : Elsevier BV. - 0013-9351 .- 1096-0953. ; 193
-
Journal article (peer-reviewed)abstract
- Background: An association between long-term exposure to fine particulate matter (PM2.5) and lung cancer has been established in previous studies. PM2.5 is a complex mixture of chemical components from various sources and little is known about whether certain components contribute specifically to the associated lung cancer risk. The present study builds on recent findings from the Effects of Low-level Air Pollution: A Study in Europe (ELAPSE) collaboration and addresses the potential association between specific elemental components of PM2.5 and lung cancer incidence.Methods: We pooled seven cohorts from across Europe and assigned exposure estimates for eight components of PM2.5 representing non-tail pipe emissions (copper (Cu), iron (Fe), and zinc (Zn)), long-range transport (sulfur (S)), oil burning/industry emissions (nickel (Ni), vanadium (V)), crustal material (silicon (Si)), and biomass burning (potassium (K)) to cohort participants' baseline residential address based on 100 m by 100 m grids from newly developed hybrid models combining air pollution monitoring, land use data, satellite observations, and dispersion model estimates. We applied stratified Cox proportional hazards models, adjusting for potential confounders (age, sex, calendar year, marital status, smoking, body mass index, employment status, and neighborhood-level socio-economic status).Results: The pooled study population comprised 306,550 individuals with 3916 incident lung cancer events during 5,541,672 person-years of follow-up. We observed a positive association between exposure to all eight components and lung cancer incidence, with adjusted HRs of 1.10 (95% CI 1.05, 1.16) per 50 ng/m(3) PM2.5 K, 1.09 (95% CI 1.02, 1.15) per 1 ng/m3 PM2.5 Ni, 1.22 (95% CI 1.11, 1.35) per 200 ng/m(3) PM2.5 S, and 1.07 (95% CI 1.02, 1.12) per 200 ng/m(3) PM2.5 V. Effect estimates were largely unaffected by adjustment for nitrogen dioxide (NO2). After adjustment for PM2.5 mass, effect estimates of K, Ni, S, and V were slightly attenuated, whereas effect estimates of Cu, Si, Fe, and Zn became null or negative.Conclusions: Our results point towards an increased risk of lung cancer in connection with sources of combustion particles from oil and biomass burning and secondary inorganic aerosols rather than non-exhaust traffic emissions. Specific limit values or guidelines targeting these specific PM2.5 components may prove helpful in future lung cancer prevention strategies.
|
|
5. |
- Barbaud, Annick, et al.
(author)
-
Allergies and COVID-19 vaccines : An ENDA/EAACI Position paper
- 2022
-
In: Allergy. European Journal of Allergy and Clinical Immunology. - : John Wiley & Sons. - 0105-4538 .- 1398-9995. ; 77:8, s. 2292-2312
-
Journal article (peer-reviewed)abstract
- Background Anaphylaxis, which is rare, has been reported after COVID-19 vaccination, but its management is not standardized.Method Members of the European Network for Drug Allergy and the European Academy of Allergy and Clinical Immunology interested in drug allergy participated in an online questionnaire on pre-vaccination screening and management of allergic reactions to COVID-19 vaccines, and literature was analysed.Results No death due to anaphylaxis to COVID-19 vaccines has been confirmed in scientific literature. Potential allergens, polyethylene glycol (PEG), polysorbate and tromethamine are excipients. The authors propose allergy evaluation of persons with the following histories: 1-anaphylaxis to injectable drug or vaccine containing PEG or derivatives; 2-anaphylaxis to oral/topical PEG containing products; 3-recurrent anaphylaxis of unknown cause; 4-suspected or confirmed allergy to any mRNA vaccine; and 5-confirmed allergy to PEG or derivatives. We recommend a prick-to-prick skin test with the left-over solution in the suspected vaccine vial to avoid waste. Prick test panel should include PEG 4000 or 3500, PEG 2000 and polysorbate 80. The value of in vitro test is arguable.Conclusions These recommendations will lead to a better knowledge of the management and mechanisms involved in anaphylaxis to COVID-19 vaccines and enable more people with history of allergy to be vaccinated.
|
|
6. |
|
|
7. |
- Cannone, Carla, et al.
(author)
-
Addressing Challenges in Long-Term Strategic Energy Planning in LMICs : Learning Pathways in an Energy Planning Ecosystem
- 2023
-
In: Energies. - : MDPI AG. - 1996-1073. ; 16:21
-
Journal article (peer-reviewed)abstract
- This paper presents an innovative approach to addressing critical global challenges in long-term energy planning for low- and middle-income countries (LMICs). The paper proposes and tests an international enabling environment, a delivery ecosystem, and a community of practice. These components are integrated into workflows that yield four self-sustaining capacity-development outcomes. Planning long-term energy strategies in LMICs is particularly challenging due to limited national agency and poor international coordination. While outsourcing energy planning to foreign experts may appear to be a viable solution, it can lead to a reduction in government agency (the ability of a government to make its own informed analysis and decisions). Additionally, studies commissioned by external experts may have conflicting terms of reference, and a lack of familiarity with local conditions can result in misrepresentations of on-the-ground realities. It is argued here that enhancing national agency and analytical capacity can improve coordination and lead to more robust planning across line ministries and technical assistance (TA) providers. Moreover, the prevailing consulting model hampers the release and accessibility of underlying analytics, making it difficult to retrieve, reuse, and reconstruct consultant outputs. The absence of interoperability among outputs from various consultants hinders the ability to combine and audit the insights they provide. To overcome these challenges, five strategic principles for energy planning in LMICs have been introduced and developed in collaboration with 21 international and research organizations, including the AfDB, IEA, IRENA, IAEA, UNDP, UNECA, the World Bank, and WRI. These principles prioritize national ownership, coherence and inclusivity, capacity, robustness, transparency and accessibility. In this enabling environment, a unique delivery ecosystem consisting of knowledge products and activities is established. The paper focuses on two key knowledge products as examples of this ecosystem: the open-source energy modeling system (OSeMOSYS) and the power system flexibility tool (IRENA FlexTool). These ecosystem elements are designed to meet user-friendliness, retrievability, reusability, reconstructability, repeatability, interoperability, and audibility (U4RIA) goals. To ensure the sustainability of this ecosystem, OpTIMUS is introduced—a community of practice dedicated to maintaining, supporting, expanding, and nurturing the elements within the ecosystem. Among other ecosystem elements, training and research initiatives are introduced, namely the Energy Modelling Platform for Africa, Latin America and the Caribbean, and Asia-Pacific as well as the ICTP Joint Summer School on Modelling Tools for Sustainable Development. Once deployed via workflows, the preliminary outcomes of these capacity-development learning pathways show promise. Further investigation is necessary to evaluate their long-term impacts, scalability, replication, and deployment costs.
|
|
8. |
- Donini, Lorenzo M., et al.
(author)
-
Critical appraisal of definitions and diagnostic criteria for sarcopenic obesity based on a systematic review
- 2020
-
In: Clinical Nutrition. - : Elsevier BV. - 0261-5614 .- 1532-1983. ; 39:8, s. 2368-2388
-
Research review (peer-reviewed)abstract
- Background: Sarcopenic obesity is a clinical and functional condition characterized by the coexistence of excess fat mass and sarcopenia. Currently, different definitions of sarcopenic obesity exist and its diagnostic criteria and cut-offs are not universally established. Therefore, the prevalence and sensitivity of this condition for any disease risk prediction is affected significantly. Aim: This work was conducted under the auspices of the European Society for Clinical Nutrition and Metabolism (ESPEN) and the European Association for the Study of Obesity (EASO). An international expert panel performed a systematic review as an initial step to analyze and summarize the available scientific literature on the definitions and the diagnostic criteria for sarcopenic obesity proposed and/or applied in human studies to date.Methods: The present systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The search was conducted in April 2018 in three databases (PubMed, Scopus, Web of Science). Human studies conducted in both sexes, irrespective of ethnicity, and published from 2007 to 2018 were included; cohorts of individuals with obesity and acute or chronic conditions and treatments reported to negatively influence skeletal muscle mass and function independently of obesity were excluded from final analyses. The quality of the studies was evaluated using the Newcastle-Ottawa Scale (NOS) adapted for cross sectional studies.Results: The electronic search retrieved 2335 papers of which 75 met the eligibility criteria. A marked heterogeneity in definitions and approaches to diagnose sarcopenic obesity was observed. This was mainly due to differences in the definitions of obesity and sarcopenia, in the methodologies used to assess body composition and physical function, and in the reference values for the variables that have been used (different cut-offs, interquartile analysis, diverse statistical stratification methods). This variability may be attributable, at least in part, to the availability of the methodologies in the different settings, to the variability in specialties and backgrounds of the researcher, and to the different settings (general population, clinical settings, etc.) where studies were performed.Conclusion: The results of the current work support the need for consensus proposals on: 1) definition of sarcopenic obesity; 2) diagnostic criteria both at the level of potential gold-standards and acceptable surrogates with wide clinical applicability, and with related cut-off values; 3) methodologies to be used in actions 1 and 2. First steps should be aimed at reaching consensus on plausible proposals that would need subsequent validation based on homogeneous studies and databases, possibly based on analyses of existing cohorts, to help define the prevalence of the condition, its clinical and functional relevance as well as most effective prevention and treatment strategies.
|
|
9. |
- Galovic, Marian, et al.
(author)
-
Seizures and Epilepsy After Stroke: Epidemiology, Biomarkers and Management.
- 2021
-
In: Drugs & aging. - : Springer Science and Business Media LLC. - 1179-1969 .- 1170-229X. ; 38, s. 285-299
-
Research review (peer-reviewed)abstract
- Stroke is the leading cause of seizures and epilepsy in older adults. Patients who have larger and more severe strokes involving the cortex, are younger, and have acute symptomatic seizures and intracerebral haemorrhage are at highest risk of developing post-stroke epilepsy. Prognostic models, including the SeLECT and CAVE scores, help gauge the risk of epileptogenesis. Early electroencephalogram and blood-based biomarkers can provide information additional to the clinical risk factors of post-stroke epilepsy. The management of acute versus remote symptomatic seizures after stroke is markedly different. The choice of an ideal antiseizure medication should not only rely on efficacy but also consider adverse effects, altered pharmacodynamics in older adults, and the influence on the underlying vascular co-morbidity. Drug-drug interactions, particularly those between antiseizure medications and anticoagulants or antiplatelets, also influence treatment decisions. In this review, we describe the epidemiology, risk factors, biomarkers, and management of seizures after an ischaemic or haemorrhagic stroke. We discuss the special considerations required for the treatment of post-stroke epilepsy due to the age, co-morbidities, co-medication, and vulnerability of stroke survivors.
|
|
10. |
- Graco-Roza, Caio, et al.
(author)
-
Distance decay 2.0 – A global synthesis of taxonomic and functional turnover in ecological communities
- 2022
-
In: Global Ecology and Biogeography. - : Wiley. - 1466-822X .- 1466-8238. ; 31:7, s. 1399-1421
-
Journal article (peer-reviewed)abstract
- Aim: Understanding the variation in community composition and species abundances (i.e., beta-diversity) is at the heart of community ecology. A common approach to examine beta-diversity is to evaluate directional variation in community composition by measuring the decay in the similarity among pairs of communities along spatial or environmental distance. We provide the first global synthesis of taxonomic and functional distance decay along spatial and environmental distance by analysing 148 datasets comprising different types of organisms and environments.Location: Global.Time period: 1990 to present.Major taxa studied: From diatoms to mammals.Method: We measured the strength of the decay using ranked Mantel tests (Mantel r) and the rate of distance decay as the slope of an exponential fit using generalized linear models. We used null models to test whether functional similarity decays faster or slower than expected given the taxonomic decay along the spatial and environmental distance. We also unveiled the factors driving the rate of decay across the datasets, including latitude, spatial extent, realm and organismal features.Results: Taxonomic distance decay was stronger than functional distance decay along both spatial and environmental distance. Functional distance decay was random given the taxonomic distance decay. The rate of taxonomic and functional spatial distance decay was fastest in the datasets from mid-latitudes. Overall, datasets covering larger spatial extents showed a lower rate of decay along spatial distance but a higher rate of decay along environmental distance. Marine ecosystems had the slowest rate of decay along environmental distances.Main conclusions: In general, taxonomic distance decay is a useful tool for biogeographical research because it reflects dispersal-related factors in addition to species responses to climatic and environmental variables. Moreover, functional distance decay might be a cost-effective option for investigating community changes in heterogeneous environments.
|
|