1. |
|
|
2. |
|
|
3. |
|
|
4. |
- Casellas, Daniel, et al.
(author)
-
A fracture mechanics approach to develop high crash resistant microstructures by press hardening
- 2017
-
In: 6th International Conference Hot Sheet Metal Forming of High-Performance Steel CHS2. - Warrendale, PA : Association for Iron & Steel Technology, AIST. - 9781935117667 ; , s. 101-107
-
Conference paper (peer-reviewed)abstract
- Crashworthiness is a relevant engineering property for car parts. However it is not easy to measure at laboratory scale and complex impact tests have to be carried out to determine it. Crash resistance for high strength steel is commonly evaluated in terms of cracking pattern and energy absorption in crashed specimens. Accordingly, the material resistance to crack propagation, i.e. the fracture toughness, could be used to rank crashworthiness. It has been proved in a previous work by the authors, so the measure of fracture toughness, in the frame of fracture mechanics in small laboratory specimens, would allow determining the best microstructure for crash resistance parts. Press hardening offers the possibility to obtain a wide range of microstructural configurations, with different mechanical properties. So the aim of this work is to evaluate the fracture toughness following the essential work of fracture methodology for ferrite-pearlite, bainite, ferrite-bainite, martensite and martensite-bainite microstructures. Results showed that bainitic microstructures have high fracture toughness, similar to TWIP and CP steels, which allows pointing them as potential candidates for obtaining high crash resistance in parts manufactured by press hardening.
|
|
5. |
- Casellas, Daniel, et al.
(author)
-
Fracture resistance of tailor tempered microstructures obtained by different press hardening conditions
- 2015
-
In: Hot Sheet Metal Forming of High-Performance Steel 5th International Conference. - Auerbach : Verlag Wissenschaftliche Scripten. - 9783957350237 ; , s. 221-229
-
Conference paper (peer-reviewed)abstract
- Tailored tempering can produce different amounts of martensite, upper and lower bainite and ferrite depending on the press hardening conditions are usually obtained. The tensile properties of such microstructures are quite well known, but the intrinsic fracture properties, as fracture toughness, have not yet been characterized. This is mainly related the experimental difficulty to measure fracture toughness in thin sheets. Recently, the authors have proposed to measure it through the application of the Essential Work of Fracture methodology. The knowledge of facture toughness would give valuable information to increase their applicability in automotive components and would also allow a further understanding of fracture and crack propagation mechanisms in B steel hardened at different cooling conditions. Thus the aim of this paper is to determine the fracture toughness in microstructures of a 22MnB5 steels obtained by tailored tempering. Results indicate that the EWF methodology can be applied to measure fracture toughness and the energy for crack initiation in ferrite-pearlite and ferrite-bainite microstructures. Fracture initiation energy is the same in ferrite-pearlite and ferrite-bainite microstructures, which will indicate that ferrite has a clear effect on fracture initiation. Moreover, fractography results reveal the effect of inclusion content on fracture energies
|
|
6. |
- Casellas, Daniel, et al.
(author)
-
Fracture Toughness to Understand Stretch-Flangeability and Edge Cracking Resistance in AHSS
- 2017
-
In: Metallurgical and Materials Transactions. A. - : Springer. - 1073-5623 .- 1543-1940. ; 48A:1, s. 86-94
-
Journal article (peer-reviewed)abstract
- The edge fracture is considered as a high risk for automotive parts, especially for parts made of advanced high strength steels (AHSS). The limited ductility of AHSS makes them more sensitive to the edge damage. The traditional approaches, such as those based on ductility measurements or forming limit diagrams, are unable to predict this type of fractures. Thus, stretch-flangeability has become an important formability parameter in addition to tensile and formability properties. The damage induced in sheared edges in AHSS parts affects stretch-flangeability, because the generated microcracks propagate from the edge. Accordingly, a fracture mechanics approach may be followed to characterize the crack propagation resistance. With this aim, this work addresses the applicability of fracture toughness as a tool to understand crack-related problems, as stretch-flangeability and edge cracking, in different AHSS grades. Fracture toughness was determined by following the essential work of fracture methodology and stretch-flangeability was characterized by means of hole expansions tests. Results show a good correlation between stretch-flangeability and fracture toughness. It allows postulating fracture toughness, measured by the essential work of fracture methodology, as a key material property to rationalize crack propagation phenomena in AHSS.
|
|
7. |
|
|
8. |
- Crescenti, Marc, et al.
(author)
-
The continuous fibre injection process (CFIP): A novel approach to lightweight design of multi-material structural components
- 2024
-
In: Material Forming - ESAFORM 2024. - : Materials Research Forum LLC. ; , s. 1630-1639
-
Conference paper (peer-reviewed)abstract
- The combination of different materials enables to achieve highly efficient structures in terms of lightweight and mechanical performance, as well as in terms of manufacturing costs. However, the weakest points of these structures use to be the joints. For this reason, in the last years, many studies have dealt with joining technologies for dissimilar materials. The Reinforce3D’s Continuous Fibre Injection Process (CFIP) technology delivers a unique method to join dissimilar materials. CFIP is based on injecting continuous fibers, such as carbon fibers, simultaneously with liquid resin into tubular cavities within the part. Then the resin is cured and the final composite part is obtained. This work focuses on the characterization of the mechanical properties of CFIP-made specimens and describes the potential lightweight benefits of the technology. Mechanical tests were performed under tensile and bending conditions following standardized methods. The lightweight potential is addressed by developing a representative case study by implementing finite element and topology optimization methods. The results of this case study were finally compared with a monomaterial equivalent component (aluminium) demonstrating the improvement that CFIP provides in terms of lightweight while keeping the strength.
|
|
9. |
- Frómeta, D., et al.
(author)
-
A new cracking resistance index based on fracture mechanics for high strength sheet metal ranking
- 2021
-
Conference paper (peer-reviewed)abstract
- Driven by current safety and weight reduction policies in the automotive sector, the development of new high strength sheet metal products has experienced unprecedented growth in the last years. With the emergence of these high strength materials, new challenges related to their limited ductility and higher cracking susceptibility have also raised. Accordingly, the development of new fracture criteria accounting for the material's cracking resistance has become unavoidable. In this work, a new cracking resistance index (CRI) based on fracture mechanics is proposed to classify the crack propagation resistance (i.e. the fracture toughness) of high strength metal sheets. The index is based on the fracture energy obtained from tensile tests with sharp-notched specimens. The procedure is very fast and simple, comparable to a conventional tensile test, and it may be used as routine testing for quality control and material selection. The CRI is investigated for several advanced high strength steel (AHSS) sheets of 0.8-1.6 mm thickness with tensile strengths between 800 and 1800 MPa. The results show that the proposed index is suitable to rank high strength steel sheets according to their crack propagation resistance and it can be correlated to the material's crashworthiness and edge cracking resistance.
|
|
10. |
- Frómeta, D., et al.
(author)
-
Assessing edge cracking resistance in AHSS automotive parts by the Essential Work of Fracture methodology
- 2017
-
In: Journal of Physics, Conference Series. - : Institute of Physics (IOP). - 1742-6588 .- 1742-6596. ; 896
-
Journal article (peer-reviewed)abstract
- Lightweight designs and demanding safety requirements in automotive industry areincreasingly promoting the use of Advanced High Strength Steel (AHSS) sheets. Such steelspresent higher strength (above 800 MPa) but lower ductility than conventional steels. Their greatproperties allow the reduction of the thickness of automobile structural components withoutcompromising the safety, but also introduce new challenges to parts manufacturers. Thefabrication of most cold formed components starts from shear cut blanks and, due to the lowerductility of AHSS, edge cracking problems can appear during forming operations, forcing thestop of the production and slowing down the industrial process.Forming Limit Diagrams (FLD) and FEM simulations are very useful tools to predict fractureproblems in zones with high localized strain, but they are not able to predict edge cracking. Ithas been observed that the fracture toughness, measured through the Essential Work of Fracture(EWF) methodology, is a good indicator of the stretch flangeability in AHSS and can help toforesee this type of fractures.In this work, a serial production automotive component has been studied. The componentshowed cracks in some flanged edges when using a dual phase steel. It is shown that theconventional approach to explain formability, based on tensile tests and FLD, fails in theprediction of edge cracking. A new approach, based on fracture mechanics, help to solve theproblem by selecting steel grades with higher fracture toughness, measured by means of EWF.Results confirmed that fracture toughness, in terms of EWF, can be readily used as a materialparameter to rationalize cracking related problems and select AHSS with improved edgecracking resistance.
|
|