1. |
- Abdollahi Sani, Negar, et al.
(author)
-
A ferroelectric polymer introduces addressability in electrophoretic display cells
- 2019
-
In: FLEXIBLE AND PRINTED ELECTRONICS. - : IOP PUBLISHING LTD. - 2058-8585. ; 4:3
-
Journal article (peer-reviewed)abstract
- During the last decades, tremendous efforts have been carried out to develop flexible electronics for a vast array of applications. Among all different applications investigated in this area, flexible displays have gained significant attention, being a vital part of large-area devices, portable systems and electronic labels etc electrophoretic (EP) ink displays have outstanding properties such as a superior optical switch contrast and low power consumption, besides being compatible with flexible electronics. However, the EP ink technology requires an active matrix-addressing scheme to enable exclusive addressing of individual pixels. EP ink pixels cannot be incorporated in low cost and easily manufactured passive matrix circuits due to the lack of threshold voltage and nonlinearity, necessities to provide addressability. Here, we suggest a simple method to introduce nonlinearity and threshold voltage in EP ink display cells in order to make them passively addressable. Our method exploits the nonlinearity of an organic ferroelectric capacitor that introduces passive addressability in display cells. The organic ferroelectric material poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) is here chosen because of its simple manufacturing protocol and good polarizability. We demonstrate that a nonlinear EP cell with bistable states can be produced by depositing a P(VDF-TrFE) film on the bottom electrode of the display cell. The P(VDF-TrFE) capacitor and the EP ink cell are separately characterized in order to match the surface charge at their respective interfaces and to achieve and optimize bistable operation of display pixels.
|
|
2. |
- Abdollahi Sani, Negar, et al.
(author)
-
All-printed diode operating at 1.6 GHz
- 2014
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 111:33, s. 11943-11948
-
Journal article (peer-reviewed)abstract
- Printed electronics are considered for wireless electronic tags and sensors within the future Internet-of-things (IoT) concept. As a consequence of the low charge carrier mobility of present printable organic and inorganic semiconductors, the operational frequency of printed rectifiers is not high enough to enable direct communication and powering between mobile phones and printed e-tags. Here, we report an all-printed diode operating up to 1.6 GHz. The device, based on two stacked layers of Si and NbSi2 particles, is manufactured on a flexible substrate at low temperature and in ambient atmosphere. The high charge carrier mobility of the Si microparticles allows device operation to occur in the charge injection-limited regime. The asymmetry of the oxide layers in the resulting device stack leads to rectification of tunneling current. Printed diodes were combined with antennas and electrochromic displays to form an all-printed e-tag. The harvested signal from a Global System for Mobile Communications mobile phone was used to update the display. Our findings demonstrate a new communication pathway for printed electronics within IoT applications.
|
|
3. |
- Abdollahi Sani, Negar, et al.
(author)
-
Flexible lamination-fabricated ultra-high frequency diodes based on self-supporting semiconducting composite film of silicon micro-particles and nano-fibrillated cellulose
- 2016
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 6
-
Journal article (peer-reviewed)abstract
- Low cost and flexible devices such as wearable electronics, e-labels and distributed sensors will make the future "internet of things" viable. To power and communicate with such systems, high frequency rectifiers are crucial components. We present a simple method to manufacture flexible diodes, operating at GHz frequencies, based on self-adhesive composite films of silicon micro-particles (Si-ÎŒPs) and glycerol dispersed in nanofibrillated cellulose (NFC). NFC, Si-ÎŒPs and glycerol are mixed in a water suspension, forming a self-supporting nanocellulose-silicon composite film after drying. This film is cut and laminated between a flexible pre-patterned Al bottom electrode and a conductive Ni-coated carbon tape top contact. A Schottky junction is established between the Al electrode and the Si-ÎŒPs. The resulting flexible diodes show current levels on the order of mA for an area of 2 mm2, a current rectification ratio up to 4 Ã 103 between 1 and 2 V bias and a cut-off frequency of 1.8 GHz. Energy harvesting experiments have been demonstrated using resistors as the load at 900 MHz and 1.8 GHz. The diode stack can be delaminated away from the Al electrode and then later on be transferred and reconfigured to another substrate. This provides us with reconfigurable GHz-operating diode circuits.
|
|
4. |
- Belaineh, Dagmawi, et al.
(author)
-
Controlling the Organization of PEDOT:PSS on Cellulose Structures
- 2019
-
In: ACS APPLIED POLYMER MATERIALS. - : AMER CHEMICAL SOC. - 2637-6105. ; 1:9, s. 2342-2351
-
Journal article (peer-reviewed)abstract
- Composites of biopolymers and conducting polymers are emerging as promising candidates for a green technological future and are actively being explored in various applications, such as in energy storage, bioelectronics, and thermoelectrics. While the device characteristics of these composites have been actively investigated, there is limited knowledge concerning the fundamental intracomponent interactions and the modes of molecular structuring. Here, by use of cellulose and poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), it is shown that the chemical and structural makeup of the surfaces of the composite components are critical factors that determine the materials organization at relevant dimensions. AFM, TEM, and GIVVAXS measurements show that when mixed with cellulose nanofibrils, PEDOT:PSS organizes into continuous nanosized beadlike structures with an average diameter of 13 nm on the nanofibrils. In contrast, when PEDOT:PSS is blended with molecular cellulose, a phase-segregated conducting network morphology is reached, with a distinctly relatively lower electric conductivity. These results provide insight into the mechanisms of PEDOT:PSS crystallization and may have significant implications for the design of conducting biopolymer composites for a vast array of applications.
|
|
5. |
- Belaineh Yilma, Dagmawi, et al.
(author)
-
Printable carbon-based supercapacitors reinforced with cellulose and conductive polymers
- 2022
-
In: Journal of Energy Storage. - : Elsevier Ltd. - 2352-152X .- 2352-1538. ; 50
-
Journal article (peer-reviewed)abstract
- Sustainable electrical energy storage is one of the most important scientific endeavors of this century. Battery and supercapacitor technologies are here crucial, but typically the current state of the art suffers from either lack of large-scale production possibilities, sustainability or insufficient performance and hence cannot match growing demands in society. Paper and cellulosic materials are mature scalable templates for industrial roll-to-roll production. Organic materials, such as conducting polymers, and carbon derivatives are materials that can be synthesized or derived from abundant sources. Here, we report the combination of cellulose, PEDOT:PSS and carbon derivatives for bulk supercapacitor electrodes adapted for printed electronics. Cellulose provides a mesoscopic mesh for the organization of the active ingredients. Furthermore, the PEDOT:PSS in combination with carbon provides superior device characteristics when comparing to the previously standard combination of activated carbon and carbon black. PEDOT:PSS acts as a mixed ion-electron conducting glue, which physically binds activated carbon particles together, while at the same time facilitating swift transport of both electrons and ions. A surprisingly small amount (10%) of PEDOT:PSS is needed to achieve an optimal performance. This work shows that cellulose added to PEDOT:PSS-carbon enables high-performing, mechanically stable, printed supercapacitor electrodes using a combination of printing methods.
|
|
6. |
- Bertilsson, L, et al.
(author)
-
Adsorption of dimethyl methylphosphonate on self-assembled alkanethiolate monolayers
- 1998
-
In: JOURNAL OF PHYSICAL CHEMISTRY B. - : AMER CHEMICAL SOC. - 1089-5647 .- 1520-6106 .- 1520-5207. ; 102:7, s. 1260-1269
-
Journal article (peer-reviewed)abstract
- The adsorption of dimethyl methylphosphonate (DMMP), a model molecule for sarin, on three different organic interfaces, prepared by solution self-assembly of alkanethiols on gold, was followed by a surface acoustic wave mass sensor and infrared reflection-absorption spectroscopy at room temperature. The surfaces, characterized by the following tail groups (-OH, -CH3, -COOH), show both quantitative and qualitative differences concerning the interaction with DMMP, the acid surface giving rise to the strongest adsorption. Results obtained in UHV, at low temperatures using infrared spectroscopy and temperature-programmed desorption, support this observation and give complementary information about the nature of the interaction. The hydrogen-bond-accepting properties of the P=O part of DMMP and its impact on the design of sensing interfaces based on hydrogen bonding, as well as the use of self-assembled monolayers to study molecular interactions, are discussed.
|
|
7. |
- Bertilsson, Lars, et al.
(author)
-
Interaction of dimethyl methylphosphonate with alkanethiolate monolayers studied by temperature-programmed desorption and infrared spectroscopy
- 1997
-
In: JOURNAL OF PHYSICAL CHEMISTRY B. - : AMER CHEMICAL SOC. - 1089-5647 .- 1520-6106 .- 1520-5207. ; 101:31, s. 6021-6027
-
Journal article (peer-reviewed)abstract
- The adsorption of dimethyl methylphosphonate (DMMP) on well-defined organic surfaces consisting of self-assembled monolayers (SAMs) of omega-substituted alkanethiolates on gold has been studied. Three different surfaces were examined: one terminated with -OH groups (Au/S-(CH2)(16)-OH), one with -CH3 (Au/S-(CH2)(15)-CH3), and one mixed surface with approximately equal amounts of -OH and -CH3 terminated thiols. Detailed information about the nature and strength of the interaction was gathered by infrared reflection-absorption spectroscopy and temperature-programmed desorption under ultrahigh-vacuum conditions. It is found that the outermost functional groups of the thiol monolayer have a pronounced impact on the interaction with DMMP at low coverage. The -OH surface, allowing for hydrogen bonds with the P=O part of the DMMP molecule, increases the strength of interaction by approximately 3.8 kJ/mol as compared to the -CH3 surface. A preadsorbed layer of D2O leads to stronger interaction on all surfaces. This is explained by additional hydrogen bond formation between free O-D at the ice-vacuum interface and DMMP.
|
|
8. |
- Blaudeck, Thomas, et al.
(author)
-
Simplified Large-Area Manufacturing of Organic Electrochemical Transistors Combining Printing and a Self-Aligning Laser Ablation Step
- 2012
-
In: Advanced Functional Materials. - : Wiley-VCH Verlag Berlin. - 1616-301X .- 1616-3028. ; 22:14, s. 2939-2948
-
Journal article (peer-reviewed)abstract
- A hybrid manufacturing approach for organic electrochemical transistors (OECTs) on flexible substrates is reported. The technology is based on conventional and digital printing (screen and inkjet printing), laser processing, and post-press technologies. A careful selection of the conductive, dielectric, and semiconductor materials with respect to their optical properties enables a self-aligning pattern formation which results in a significant reduction of the usual registration problems during manufacturing. For the prototype OECTs, based on this technology, on/off ratios up to 600 and switching times of 100 milliseconds at gate voltages in the range of 1 V were obtained.
|
|
9. |
- Brooke, Robert, et al.
(author)
-
Controlling the electrochromic properties of conductive polymers using UV-light
- 2018
-
In: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 6:17, s. 4663-4670
-
Journal article (peer-reviewed)abstract
- The phenomenon of electrochromism in conductive polymers is well known and has been exploited in many scientific reports. Using a newly developed patterning technique for conductive polymers, we manufactured high-resolution electrochromic devices from the complementary polymers PEDOT and polypyrrole. The technique, which combines UV-light exposure with vapor phase polymerization, has previously only been demonstrated with the conductive polymer PEDOT. We further demonstrated how the same technique can be used to control the optical properties and the electrochromic contrast in these polymers. Oxidant exposure to UV-light prior to vapor phase polymerization showed a reduction in polymer electrochromic contrast allowing high-resolution (100 mu m) patterns to completely disappear while applying a voltage bias due to their optical similarity in one redox state and dissimilarity in the other. This unique electrochromic property enabled us to construct devices displaying images that appear and disappear with the change in applied voltage. Finally, a modification of the electrochromic device architecture permitted a dual image electrochromic device incorporating patterned PEDOT and patterned polypyrrole on the same electrode, allowing the switching between two different images.
|
|
10. |
- Brooke, Robert, 1989-, et al.
(author)
-
Greyscale and paper electrochromic polymer displays by UV patterning
- 2019
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 11:2
-
Journal article (peer-reviewed)abstract
- Electrochromic devices have important implications as smart windows for energy efficient buildings, internet of things devices, and in low-cost advertising applications. While inorganics have so far dominated the market, organic conductive polymers possess certain advantages such as high throughput and low temperature processing, faster switching, and superior optical memory. Here, we present organic electrochromic devices that can switch between two high-resolution images, based on UV-patterning and vapor phase polymerization of poly(3,4- ethylenedioxythiophene) films. We demonstrate that this technique can provide switchable greyscale images through the spatial control of a UV-light dose. The color space was able to be further altered via optimization of the oxidant concentration. Finally, we utilized a UV-patterning technique to produce functional paper with electrochromic patterns deposited on porous paper, allowing for environmentally friendly electrochromic displays.
|
|