1. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
|
|
3. |
- Jin, Ying-Hui, et al.
(author)
-
Chemoprophylaxis, diagnosis, treatments, and discharge management of COVID-19 : An evidence-based clinical practice guideline (updated version)
- 2020
-
In: Military Medical Research. - : Springer Science and Business Media LLC. - 2054-9369. ; 7:1
-
Journal article (peer-reviewed)abstract
- The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the cause of a rapidly spreading illness, coronavirus disease 2019 (COVID-19), affecting more than seventeen million people around the world. Diagnosis and treatment guidelines for clinicians caring for patients are needed. In the early stage, we have issued "A rapid advice guideline for the diagnosis and treatment of 2019 novel coronavirus (2019-nCoV) infected pneumonia (standard version)"; now there are many direct evidences emerged and may change some of previous recommendations and it is ripe for develop an evidence-based guideline. We formed a working group of clinical experts and methodologists. The steering group members proposed 29 questions that are relevant to the management of COVID-19 covering the following areas: chemoprophylaxis, diagnosis, treatments, and discharge management. We searched the literature for direct evidence on the management of COVID-19, and assessed its certainty generated recommendations using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. Recommendations were either strong or weak, or in the form of ungraded consensus-based statement. Finally, we issued 34 statements. Among them, 6 were strong recommendations for, 14 were weak recommendations for, 3 were weak recommendations against and 11 were ungraded consensus-based statement. They covered topics of chemoprophylaxis (including agents and Traditional Chinese Medicine (TCM) agents), diagnosis (including clinical manifestations, reverse transcription-polymerase chain reaction (RT-PCR), respiratory tract specimens, IgM and IgG antibody tests, chest computed tomography, chest x-ray, and CT features of asymptomatic infections), treatments (including lopinavir-ritonavir, umifenovir, favipiravir, interferon, remdesivir, combination of antiviral drugs, hydroxychloroquine/chloroquine, interleukin-6 inhibitors, interleukin-1 inhibitors, glucocorticoid, qingfei paidu decoction, lianhua qingwen granules/capsules, convalescent plasma, lung transplantation, invasive or noninvasive ventilation, and extracorporeal membrane oxygenation (ECMO)), and discharge management (including discharge criteria and management plan in patients whose RT-PCR retesting shows SARS-CoV-2 positive after discharge). We also created two figures of these recommendations for the implementation purpose. We hope these recommendations can help support healthcare workers caring for COVID-19 patients.
|
|
4. |
- Li, Yuchen, et al.
(author)
-
Psychological distress among health professional students during the COVID-19 outbreak
- 2021
-
In: Psychological Medicine. - : Cambridge University Press. - 0033-2917 .- 1469-8978. ; 51:11, s. 1952-1954
-
Journal article (peer-reviewed)abstract
- Background: Due to the drastic surge of COVID-19 patients, many countries are considering or already graduating health professional students early to aid professional resources. We aimed to assess outbreak-related psychological distress and symptoms of acute stress reaction (ASR) in health professional students and to characterize individuals with potential need for interventions.Methods: We conducted a prospective cohort study of 1442 health professional students at Sichuan University, China. At baseline (October 2019), participants were assessed for childhood adversity, stressful life events, internet addiction, and family functioning. Using multivariable logistic regression, we examined associations of the above exposures with subsequent psychological distress and ASR in response to the outbreak.Results: Three hundred and eighty-four (26.63%) participants demonstrated clinically significant psychological distress, while 160 (11.10%) met the criterion for a probable ASR. Individuals who scored high on both childhood adversity and stressful life event experiences during the past year were at increased risks of both distress (ORs 2.00-2.66) and probable ASR (ORs 2.23-3.10), respectively. Moreover, internet addiction was associated with elevated risks of distress (OR 2.05, 95% CI 1.60-2.64) and probable ASR (OR 2.15, 95% CI 1.50-3.10). By contrast, good family functioning was associated with decreased risks of distress (OR 0.43, 95% CI 0.33-0.55) and probable ASR (OR 0.48, 95% CI 0.33-0.69). All associations were independent of baseline psychological distress.Conclusions: Our findings suggest that COVID-19 related psychological distress and high symptoms burden of ASR are common among health professional students. Extended family and professional support should be considered for vulnerable individuals during these unprecedented times.
|
|
5. |
- Chang, Chiao-Nien, et al.
(author)
-
The Design, Structure–Activity, and Kinetic Studies of 3-Benzyl-5-oxa-1,2,3,4-Tetrahydro-2H-chromeno-(3,4-c)pyridin-8-yl Sulfamates as Steroid Sulfatase Inhibitors
- 2022
-
In: Bioorganic chemistry. - : Elsevier BV. - 0045-2068.
-
Journal article (peer-reviewed)abstract
- Steroid sulfatase inhibitors block the local production of estrogenic steroids and are attractive agents for the treatment of estrogen-dependent cancers. Inspiration of coumarin-based inhibitors, we synthesized thirty-two 5-oxa-1,2,3,4-tetrahydro-2H-chromeno-(3,4-c)pyridin-8-yl sulfamates, focusing on the substitution derivatives on the adjacent phenyl ring and evaluated their abilities to block STS from human placenta and MCF-7 cells. SAR analysis revealed that the incorporation of chlorine at either meta and/or para position of the adjacent phenyl ring of the tricyclic skeleton enhanced STS inhibition. Di-substitutions at the adjacent phenyl ring were superior to mono and tri-substitutions. Further kinetic analysis of these compounds revealed that chloride-bearing compounds, such as 19m, 19v, and 19w, had KI of 0.02 to 0.11 nM and kinact/KI ratios of 8.8-17.5 nM-1min-1, a parameter indicated for the efficiency of irreversible inhibition. We also used the docking model to illustrate the difference in STS inhibitory potency of compounds. Finally, the safety and anti-cancer activity of selected compounds 19m, 19v, and 19w were also studied, showing the results of low cytotoxicity on NHDF cell line and being more potent than irosustat on ZR-75-1 cell, which was a hormone-dependent cancer cell line with high STS expression.
|
|
6. |
- Dan, Lilin, et al.
(author)
-
Design of Offset Spatial Modulation OFDM
- 2021
-
In: IEEE Transactions on Communications. - : Institute of Electrical and Electronics Engineers (IEEE). - 0090-6778 .- 1558-0857. ; 69:9, s. 6267-6280
-
Journal article (peer-reviewed)abstract
- In this paper, the idea of offset spatial modulation (OSM) is integrated with orthogonal frequency division multiplexing (OFDM), toward an efficient design to bridge their advantages. Compared to its conventional counterpart as spatial modulation (SM)-OFDM, the proposed OSM-OFDM scheme aims at providing a simplified implementation structure with less number of radio frequency (RF) chains, by introducing an offset between the RF chain and the index of the activated transmit antenna on each subcarrier. Specifically, three types of offset antenna selection (OAS) methods are developed to meet different scene requirements for different number of available RF chains. Furthermore, through theoretical analysis, we quantify the bit error rate upper bounds of OSM-OFDM with different types of OAS methods. Finally, extensive computer simulations demonstrate that OSM-OFDM provides a flexible tradeoff among implementation cost, computation complexity and error performance.
|
|
7. |
- Fang, Ruisen, et al.
(author)
-
Late Ediacaran cavity-dwelling filamentous microorganisms accommodated in a valve-like organism from the uppermost Dengying Formation in eastern Yunnan of South China
- 2022
-
In: Precambrian Research. - : Elsevier. - 0301-9268 .- 1872-7433. ; 379
-
Journal article (peer-reviewed)abstract
- The EdiacaranâCambrian transition, one of the major turning points in Earthâs history, is characterized by an epoch-making change in biosphere. In South China, the late Ediacaran Dengying Formation (ca. 551â538Â Ma) is an important stratigraphic unit yielding trace fossils, tubular skeletal fossils and some complex forms that represent possible bilateral animals. The fossil-bearing Ediacaran strata of eastern Yunnan is hitherto known from the Jiucheng Member containing the Jiangchuan Biota, together with the enigmatic cosmopolitan taxon Shaanxilithes. Here, we present for the first time cavity-dwelling filamentous microorganisms accommodated within a valve-like fossil from the upper Baiyanshao Member of the Dengying Formation at the Sujiawa Section in Huize County, eastern Yunnan of China. SEM scanning and Micro-CT reconstruction indicate that the well-preserved filaments were characterized by mycelial network structures with abundant branching pattern. Preservation of filamentous microorganisms might result from the decay process of soft parts that were originally accommodated and enclosed within the valve-like organism, and subsequently preserved by early diagenetic phosphatization, which obscures their original organic identity and chemical composition. This paper potentially presents the first fossil evidence of a saprophytic relationship between microorganisms as decomposers and a valve-like organism prior to the eve of the Cambrian Explosion of metazoan animals.
|
|
8. |
- Fang, Xing, et al.
(author)
-
Microstructure and mechanical properties of the laser welded air-hardening steel joint
- 2024
-
In: Materials Characterization. - : Elsevier BV. - 1044-5803 .- 1873-4189. ; 213
-
Journal article (peer-reviewed)abstract
- The decrease in mechanical properties of high-strength steel after welding is an important issue affecting the wide application of high-strength steel. Air-hardening steel is a high-strength steel suitable for lower body structural parts such as subframes. Its application process involves welding, hot forming and other processes. The present work investigates the microstructure and mechanical properties of the air-hardening steel laser welded joint that is air-cooled after hot forming in the two-phase zone (800 °C). The microstructure was characterized by electron backscattered diffraction (EBSD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that during hot forming, the welded joint transforms from martensite to ferrite and acicular martensite, and the base metal transforms from ferrite to polygonal martensite and ferrite. The difference in martensite morphology between the welded joint and the base metal is attributed to the nucleation positions of austenite. The structural evolution of the welded joint and the base metal is accompanied with the annihilation and reproduction of dislocations, which results in significant changes in hardness. The hardness value dropped from the highest 430 HV to 271 HV in the welded joint, while increased from the lowest 184 HV to 203 HV in the base metal. After hot forming, the tensile strength of the welded sample is reduced by only 36 MPa, and the total elongation is slightly decreased by about 1.5% compared with the unwelded sample. The welded joint and the base metal have similar plastic deformation capabilities, since the acicular martensite in the welded joint displays good plastic deformation ability, and the dislocation density of the welded joint and the base metal is similar. Overall, the microstructure and dislocation density of the air-hardening steel welded joint after hot forming are similar to those of the base metal, which is responsible for the good mechanical properties of air-hardening steel welded joint.
|
|
9. |
- Hantson, Stijn, et al.
(author)
-
Quantitative assessment of fire and vegetation properties in simulations with fire-enabled vegetation models from the Fire Model Intercomparison Project
- 2020
-
In: Geoscientific Model Development. - : Copernicus GmbH. - 1991-959X .- 1991-9603. ; 13:7, s. 3299-3318
-
Journal article (peer-reviewed)abstract
- Global fire-vegetation models are widely used to assess impacts of environmental change on fire regimes and the carbon cycle and to infer relationships between climate, land use and fire. However, differences in model structure and parameterizations, in both the vegetation and fire components of these models, could influence overall model performance, and to date there has been limited evaluation of how well different models represent various aspects of fire regimes. The Fire Model Intercomparison Project (FireMIP) is coordinating the evaluation of state-of-the-art global fire models, in order to improve projections of fire characteristics and fire impacts on ecosystems and human societies in the context of global environmental change. Here we perform a systematic evaluation of historical simulations made by nine FireMIP models to quantify their ability to reproduce a range of fire and vegetation benchmarks. The FireMIP models simulate a wide range in global annual total burnt area (39-536 Mha) and global annual fire carbon emission (0.91-4.75 Pg C yr-1) for modern conditions (2002-2012), but most of the range in burnt area is within observational uncertainty (345-468 Mha). Benchmarking scores indicate that seven out of nine FireMIP models are able to represent the spatial pattern in burnt area. The models also reproduce the seasonality in burnt area reasonably well but struggle to simulate fire season length and are largely unable to represent interannual variations in burnt area. However, models that represent cropland fires see improved simulation of fire seasonality in the Northern Hemisphere. The three FireMIP models which explicitly simulate individual fires are able to reproduce the spatial pattern in number of fires, but fire sizes are too small in key regions, and this results in an underestimation of burnt area. The correct representation of spatial and seasonal patterns in vegetation appears to correlate with a better representation of burnt area. The two older fire models included in the FireMIP ensemble (LPJ-GUESS-GlobFIRM, MC2) clearly perform less well globally than other models, but it is difficult to distinguish between the remaining ensemble members; some of these models are better at representing certain aspects of the fire regime; none clearly outperforms all other models across the full range of variables assessed.
|
|
10. |
- Hu, Haiman, et al.
(author)
-
Revealing the role and working mechanism of confined ionic liquids in solid polymer composite electrolytes
- 2024
-
In: Journal of Energy Chemistry. - : Elsevier. - 2095-4956 .- 2096-885X. ; 99, s. 110-119
-
Journal article (peer-reviewed)abstract
- The confined ionic liquid (IL) in solid polymer composite electrolytes (SCPEs) can improve the performance of lithium metal batteries. However, the impact/role and working mechanism of confined IL in SCPEs remain ambiguous. Herein, IL was immobilized on SiO2 (SiO2@IL-C) and then used to prepare the confined SCPEs together with LiTFSI and PEO to study the impacts of confined-IL on the properties and performance of electrolytes and reveal the Li+ transport mechanism. The results show that, compared to the IL-unconfined SCPE, the IL-confined ones exhibit better performance of electrolytes and cells, such as higher ionic conductivity, higher tLi+, and wider electrochemical windows, as well as more stable cycle performance, due to the increased dissociation degree of lithium salt and enlarged polymer amorphousness. The finite-element/molecular-dynamics simulations suggest that the IL confined on the SiO2 provided an additional Li+ transport pathway (Li+ → SiO2@IL-C) that can accelerate ion transfer and alleviate lithium dendrites, leading to ultrastable stripping/plating cycling over 1900 h for the Li/SCPEs/Li symmetric cells. This study demonstrates that IL-confinement is an effective strategy for the intelligent approach of high-performance lithium metal batteries.
|
|