1. |
- Sugai, H., et al.
(author)
-
Updated Design of the CMB Polarization Experiment Satellite LiteBIRD
- 2020
-
In: Journal of Low Temperature Physics. - : Springer Science and Business Media LLC. - 0022-2291 .- 1573-7357. ; 199:3-4, s. 1107-1117
-
Journal article (peer-reviewed)abstract
- Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite cosmic microwave background (CMB) polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the CMB by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34 and 448 GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5 K for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for 3 years. An international collaboration between Japan, the USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science, JAXA, selected LiteBIRD as the strategic large mission No. 2.
|
|
2. |
|
|
3. |
|
|
4. |
- Shitvov, A., et al.
(author)
-
Broadband coated lens solutions for FIR-mm-wave instruments
- 2022
-
In: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Journal article (peer-reviewed)abstract
- This paper presents recent results of ongoing European Space Agency funded program of work aimed at developing large dielectric lenses suitable for future satellite missions, with a particular focus on requirements for CMB polarimetry. Two lens solutions are being investigated: (i) polymer lenses with broadband multi-layer antireflection coatings; (ii) silicon lenses with surface-structured anti-reflection coating represented by directly machined pyramidal features. For each solution, base materials with and without coatings have been optically characterized over a range of temperatures down to ~10 K. Full lens solutions are under manufacture and will be tested in a bespoke large cryo-optical facility.
|
|
5. |
- Alfirevic, Andrej, et al.
(author)
-
Serratus anterior and pectoralis plane blocks for robotically assisted mitral valve repair : a randomised clinical trial
- 2023
-
In: British Journal of Anaesthesia. - 0007-0912. ; 130:6, s. 786-794
-
Journal article (peer-reviewed)abstract
- Background: Minimally invasive cardiac surgery provokes substantial pain and therefore analgesic consumption. The effect of fascial plane blocks on analgesic efficacy and overall patient satisfaction remains unclear. We therefore tested the primary hypothesis that fascial plane blocks improve overall benefit analgesia score (OBAS) during the initial 3 days after robotically assisted mitral valve repair. Secondarily, we tested the hypotheses that blocks reduce opioid consumption and improve respiratory mechanics. Methods: Adults scheduled for robotically assisted mitral valve repairs were randomised to combined pectoralis II and serratus anterior plane blocks or to routine analgesia. The blocks were ultrasound-guided and used a mixture of plain and liposomal bupivacaine. OBAS was measured daily on postoperative Days 1–3 and were analysed with linear mixed effects modelling. Opioid consumption was assessed with a simple linear regression model and respiratory mechanics with a linear mixed model. Results: As planned, we enrolled 194 patients, with 98 assigned to blocks and 96 to routine analgesic management. There was neither time-by-treatment interaction (P=0.67) nor treatment effect on total OBAS over postoperative Days 1–3 with a median difference of 0.08 (95% confidence interval [CI]: –0.50 to 0.67; P=0.69) and an estimated ratio of geometric means of 0.98 (95% CI: 0.85–1.13; P=0.75). There was no evidence of a treatment effect on cumulative opioid consumption or respiratory mechanics. Average pain scores on each postoperative day were similarly low in both groups. Conclusions: Serratus anterior and pectoralis plane blocks did not improve postoperative analgesia, cumulative opioid consumption, or respiratory mechanics during the initial 3 days after robotically assisted mitral valve repair. Clinical trial registration: NCT03743194.
|
|
6. |
|
|
7. |
- Franceschet, C., et al.
(author)
-
The optical bread-board models of the LiteBIRD Medium and High Frequency Telescope
- 2022
-
In: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Journal article (peer-reviewed)abstract
- In this paper we discuss the modeling, development and testing of the optical bread-board models of the Medium and High Frequency Telescope (MHFT) onboard the LiteBIRD satellite. The future JAXA mission LiteBIRD will search for the signature of primordial gravitational waves through the measurement of the "B-modes"of the cosmic microwave background polarization. MHFT will observe the polarized microwave sky between 89 and 448 GHz by means of two refractive telescopes. The accurate knowledge of their optical properties is fundamental to assess the impact of systematic effects (e.g. beam deformation, side lobes and intensity to polarization leakage) on the future observations. To gain early experience with our test approach, and to provide hints of possible criticalities in the design and characterization of a MHFT-like refractive system, we developed two optical bread-board models. The BB1, a single dielectric lens coupled to a fully characterized W-band corrugated horn, allows us to assess the accuracy and potential limitations of different measurement methods and to verify the reliability of optical simulators in predicting refractive elements and systems, as compared to the precision required by LiteBIRD. The BB2, a 1a.,2-scaled version of the Medium Frequency Telescope, focuses on the modelling and issues of dual-lens coupling, while providing a test-bed to finalize the MHFT optical calibration plan for its higher levels of integration.
|
|
8. |
|
|
9. |
- Gudmundsson, Jón E., et al.
(author)
-
The Simons Observatory : modeling optical systematics in the Large Aperture Telescope
- 2021
-
In: Applied Optics. - 1559-128X .- 2155-3165. ; 60:4, s. 823-837
-
Journal article (peer-reviewed)abstract
- We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope, allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors and the cold optics that are now being built. We describe nonsequential ray tracing used to inform the design of the cold optics, including absorbers internal to each optics tube. We discuss ray tracing simulations of the telescope structure that allow us to determine geometries that minimize detector loading and mitigate spurious near-field effects that have not been resolved by the internal baffling. We also describe physical optics simulations, performed over a range of frequencies and field locations, that produce estimates of monochromatic far-field beam patterns, which in turn are used to gauge general optical performance. Finally, we describe simulations that shed light on beam sidelobes from panel gap diffraction.
|
|