1. |
- Su, Zhan, et al.
(author)
-
Common variants at the MHC locus and at chromosome 16q24.1 predispose to Barrett's esophagus.
- 2012
-
In: Nature Genetics. - : Springer Science and Business Media LLC. - 1061-4036 .- 1546-1718. ; 44:10
-
Journal article (peer-reviewed)abstract
- Barrett's esophagus is an increasingly common disease that is strongly associated with reflux of stomach acid and usually a hiatus hernia, and it strongly predisposes to esophageal adenocarcinoma (EAC), a tumor with a very poor prognosis. We report the first genome-wide association study on Barrett's esophagus, comprising 1,852 UK cases and 5,172 UK controls in the discovery stage and 5,986 cases and 12,825 controls in the replication stage. Variants at two loci were associated with disease risk: chromosome 6p21, rs9257809 (Pcombined=4.09×10(-9); odds ratio (OR)=1.21, 95% confidence interval (CI)=1.13-1.28), within the major histocompatibility complex locus, and chromosome 16q24, rs9936833 (Pcombined=2.74×10(-10); OR=1.14, 95% CI=1.10-1.19), for which the closest protein-coding gene is FOXF1, which is implicated in esophageal development and structure. We found evidence that many common variants of small effect contribute to genetic susceptibility to Barrett's esophagus and that SNP alleles predisposing to obesity also increase risk for Barrett's esophagus.
|
|
2. |
- Alvfors, Per, 1954-, et al.
(author)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples : Improvement potential discussed in the context of Well-to-Tank analyses
- 2010
-
Reports (other academic/artistic)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use. Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology. In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study. We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose. From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier.
|
|
3. |
- Alvfors, Per, et al.
(author)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples
- 2010
-
Reports (other academic/artistic)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use.Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology. In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study. We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose. From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier. Three important results from the lignocellulosic ethanol study are: (i) the production systems could be far more complex and intelligently designed than previous studies show, (ii) the potential improvements consist of a large number of combinations of process integration options wich partly depends on specific local conditions, (iii) the environmental performance of individual systems may vary significantly due to systems design and local conditons.From the case study on gasification of solid biomass for the production of biomethane we find that one of the main advantages of this technology is its high efficiency in respect to converting biomass into fuels for transport. For future research we see a need for improvements within the gas up-grading section, including gas cleaning and gas conditioning, to obtain a more efficient process. A major challenge is to remove the tar before the methanation reaction. Three important results from the biomethane study are: (i) it is important not to crack the methane already produced in the syngas, which indicates a need for improved catalysts for selective tar cracking, (ii) there is a need for new gas separation techniques to facilitate the use of air oxidation agent instead of oxygen in the gasifier, and (iii) there is a need for testing the integrated process under realistic conditions, both at atmospheric and pressurized conditions. From the case study on black liquor gasification for the production of DME we find that the process has many advantages compared to other biofuel production options, such as the fact that black liquor is already partially processed and exists in a pumpable, liquid form, and that the process is pressurised and tightly integrated with the pulp mill, which enhances fuel production efficiency. However, to achieve commercial status, some challenges still remain, such as demonstrating that materials and plant equipment meet the high availability required when scaling up to industrial size in the pulp mill, and also proving that the plant can operate according to calculated heat and material balances. Three important results from the DME study are: (i) that modern chemical pulp mills, having a potential surplus of energy, could become important suppliers of renewable fuels for transport, (ii) there is a need to demonstrate that renewable DME/methanol will be proven to function in large scale, and (iii) there is still potential for technology improvements and enhanced energy integration. Although quantitative improvement potentials are given in the three biofuel production cases, it is not obvious how these potentials would affect WTT values, since the biofuel production processes are complex and changing one parameter impacts other parameters. The improvement potentials are therefore discussed qualitatively. From the entire study we have come to agree on the following common conclusions: (i) research and development in Sweden within the three studied 2G biofuel production technologies is extensive, (ii) in general, the processes, within the three cases, work well at pilot and demonstration scale and are now in a phase to be proven in large scale, (iii) there is still room for improvement although some processes have been known for decades, (iv) the biofuel production processes are complex and site specific and process improvements need to be seen and judged from a broad systems perspective (both within the production plant as well as in the entire well-to-tank perspective), and (v) the three studied biofuel production systems are complementary technologies. Futher, the process of conducting this study is worth mentioning as a result itself, i.e. that many different actors within the field have proven their ability and willingness to contribute to a common report, and that the cooperation climate was very positive and bodes well for possible future collaboration within the framework of the f3 center. Finally, judging from the political ambitions it is clear that the demand for renewable fuels will significantly increase during the coming decade. This will most likely result in opportunities for a range of biofuel options. The studied biofuel options all represent 2G biofuels and they can all be part of the solution to meet the increased renewable fuel demand.
|
|
4. |
- Alvors, Per, et al.
(author)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples : Improvement potential discussed in the context of Well-to-Tank analyses
- 2010
-
Reports (other academic/artistic)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use.Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology.In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study.We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose.From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier.Three important results from the lignocellulosic ethanol study are: (i) the production systems could be far more complex and intelligently designed than previous studies show, (ii) the potential improvements consist of a large number of combinations of process integration options wich partly depends on specific local conditions, (iii) the environmental performance of individual systems may vary significantly due to systems design and local conditons.From the case study on gasification of solid biomass for the production of biomethane we find that one of the main advantages of this technology is its high efficiency in respect to converting biomass into fuels for transport. For future research we see a need for improvements within the gas up-grading section, including gas cleaning and gas conditioning, to obtain a more efficient process. A major challenge is to remove the tar before the methanation reaction.Three important results from the biomethane study are: (i) it is important not to crack the methane already produced in the syngas, which indicates a need for improved catalysts for selective tar cracking, (ii) there is a need for new gas separation techniques to facilitate the use of air oxidation agent instead of oxygen in the gasifier, and (iii) there is a need for testing the integrated process under realistic conditions, both at atmospheric and pressurized conditions.From the case study on black liquor gasification for the production of DME we find that the process has many advantages compared to other biofuel production options, such as the fact that black liquor is already partially processed and exists in a pumpable, liquid form, and that the process is pressurised and tightly integrated with the pulp mill, which enhances fuel production efficiency. However, to achieve commercial status, some challenges still remain, such as demonstrating that materials and plant equipment meet the high availability required when scaling up to industrial size in the pulp mill, and also proving that the plant can operate according to calculated heat and material balances. Three important results from the DME study are: (i) that modern chemical pulp mills, having a potential surplus of energy, could become important suppliers of renewable fuels for transport, (ii) there is a need to demonstrate that renewable DME/methanol will be proven to function in large scale, and (iii) there is still potential for technology improvements and enhanced energy integration.Although quantitative improvement potentials are given in the three biofuel production cases, it is not obvious how these potentials would affect WTT values, since the biofuel production processes are complex and changing one parameter impacts other parameters. The improvement potentials are therefore discussed qualitatively. From the entire study we have come to agree on the following common conclusions: (i) research and development in Sweden within the three studied 2G biofuel production technologies is extensive, (ii) in general, the processes, within the three cases, work well at pilot and demonstration scale and are now in a phase to be proven in large scale, (iii) there is still room for improvement although some processes have been known for decades, (iv) the biofuel production processes are complex and site specific and process improvements need to be seen and judged from a broad systems perspective (both within the production plant as well as in the entire well-to-tank perspective), and (v) the three studied biofuel production systems are complementary technologies. Futher, the process of conducting this study is worth mentioning as a result itself, i.e. that many different actors within the field have proven their ability and willingness to contribute to a common report, and that the cooperation climate was very positive and bodes well for possible future collaboration within the framework of the f3 center.Finally, judging from the political ambitions it is clear that the demand for renewable fuels will significantly increase during the coming decade. This will most likely result in opportunities for a range of biofuel options. The studied biofuel options all represent 2G biofuels and they can all be part of the solution to meet the increased renewable fuel demand.
|
|
5. |
- Andersson, Eva Ingeborg Elisabeth, 1956, et al.
(author)
-
TSA II Stenungsund - Investigation of opportunities for implementation of proposed energy efficiency measures
- 2011
-
Reports (other academic/artistic)abstract
- A Total Site Analysis (TSA) study of the chemical cluster in Stenungsund was conducted during 2010. This previous study is hereafter referred to as the TSA I study. The study was conducted by CIT Industriell Energi and the Division of Heat and Power Technology at Chalmers together with the participating cluster companies (AGA Gas AB, Akzo Nobel Sverige AB, Borealis AB, INEOS Sverige AB and Perstorp Oxo AB).In the TSA I study, measures to increase energy efficiency by increased energy collaboration (i.e. increased heat exchange between the cluster plants) were identified. The measures were classified according to ease of implementation based on consultation with plant staff. In this report, conducted within the framework of the second stage of the TSA research project (hereafter referred to as the TSA II project) practical issues associated with implementation of the identified measures are investigated. The investigation is limited to category A measures, considered by plant staff to be relatively easy to implement from a technical perspective. A conceptual design of a possible hot water system for exchanging heat between the different sites is presented. Since the steam systems of the different plants are at present only partly connected, or not at all, the overall reduction in steam use that would results from introduction of a hot water system would lead to steam surplus at certain sites. Therefore introducing a hot water system is only beneficial if new steam lines are also implemented so that it becomes possible to exchange steam between the individual plant sites. The exchange of steam is only possible if steam demand and steam excess are at the same pressure level. To avoid excess steam at low pressure level, demand of low pressure steam must increase. In order to increase the possibility to use more low pressure steam, the opportunities to decrease utility steam pressure in individual process heaters are analyzed. The implementation of energy efficiency measures in the refrigeration systems is also investigated. In practice this can be achieved by changing steam as heating utility to a fluid that can operate below ambient. In addition to the steam saving, the heat transfer fluid can transport energy from the current cooling systems and decrease the amount of compressor work required to operate the existing refrigeration system units.In order to achieve a reduction of purchased fuel for firing in boilers it is necessary to implement both a common site-wide circulating hot water system and a reduction of utility steam pressure used in several process heaters .The results show that if all measures that are considered by plant energy engineers to be feasible by moderate changes are carried out as suggested, fuel usage in boilers could be reduced by 89 MW (corresponding to 200 MSEK/year if fuel gas is valued at 270 SEK/MWh and year-round operation is assumed).A rough estimate of the total investment costs for the implementation of category A measures is 660 MSEK.
|
|
6. |
- Arvidsson, Maria, 1984, et al.
(author)
-
Biomass Gasification-Based Syngas Production for a Conventional Oxo Synthesis Plant-Process Modeling, Integration Opportunities, and Thermodynamic Performance
- 2014
-
In: Energy & Fuels. - : American Chemical Society (ACS). - 1520-5029 .- 0887-0624. ; 28:6, s. 4075-4087
-
Journal article (peer-reviewed)abstract
- This work investigates the energy performance consequences of replacing conventional natural gas-based syngas production with biomass gasification-based production as a supply of feedstock for a conventional oxo synthesis plant. The investigation is conducted for a plant currently processing 175 MW [higher heating value (HHV) basis] of natural gas (NG) annually. Two concepts based on the same gasification technology are considered: (i) replacing the NG feedstock with biomass-derived synthetic NG (bio-SNG); (ii) replacing syngas with biomass-derived syngas. The work is based upon process models established in Aspen Plus in order to obtain mass and energy balances. Heat recovery opportunities by means of production of useful thermal heat and integration of a steam network for combined heat and power production are investigated using pinch analysis tools. Two different ways of harnessing the high-temperature excess heat are investigated: (i) maximization of the power production; (ii) low-pressure (LP) steam (co)production for process heating to reduce or entirely cover the steam demand of the oxo synthesis plant, which is currently produced by firing of purchased fuel gas. The different process alternatives are compared in terms of energy efficiency (eta(en)) and exergy efficiency (eta(ex)). The results show that around 262 MW (HHV basis) of lignocellulosic biomass is required to fully substitute for the NG feedstock with bio-SNG. The biomass input can be reduced to 216 MW (HHV basis) if the required syngas is produced directly from gasified biomass, thus avoiding the intermediate SNG synthesis step. The direct syngas route achieves the highest thermodynamic performance of the biorefinery concepts investigated, especially if LP steam is exported to the oxo synthesis plant (eta(en) = 75% and eta(ex) = 57%, i.e., 9.1 and 7.2 efficiency points higher than for the route via bio-SNG, respectively).
|
|
7. |
- Arvidsson, Maria, 1984, et al.
(author)
-
Integration opportunities for substitute natural gas (SNG) production in an industrial process plant
- 2012
-
In: CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES.
-
Conference paper (peer-reviewed)abstract
- The integration opportunities for SNG production based on thermal gasification of lignocellulosic biomass in one of the production plants currently importing natural gas for further processing to speciality chemicals was studied. To solve material and energy balances, the SNG process was modeled in Aspen Plus. Three opportunities for SNG process heat recovery was studied, i.e., the steam production potential from the SNG process excess heat, the electricity production potential by maximizing the heat recovery in the SNG process without additional fuel firing, and the electricity production potential with increased steam cycle efficiency and additional fuel firing. About 217 MwLHV of woody biomass were required to substitute the site's natural gas demand with SNG. There is a potential to recover heat from the SNG process to completely cover the site's net steam demand or to produce enough electricity to cover the demand of the SNG process. There is also a possibility to fully exploit the heat pockets in the SNG process Grand Composite Curve resulting in an increase of the steam cycle electricity output. This is an abstract of a paper presented at the CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction
|
|
8. |
- Arvidsson, Maria, 1984, et al.
(author)
-
Integration opportunities for Substitute Natural Gas (SNG) production in an industrial process plant
- 2012
-
In: Chemical Engineering Transactions. - 2283-9216 .- 2283-9216. ; 29, s. 331-336
-
Journal article (peer-reviewed)abstract
- This paper investigates opportunities for integration of a Substitute Natural Gas (SNG) process based on thermal gasification of lignocellulosic biomass in an industrial process plant currently importing natural gas (NG) for further processing to speciality chemicals. The assumed SNG process configuration is similar to that selected for the ongoing Gothenburg Biomass Gasification demonstration project (GoBiGas) and is modelled in Aspen Plus. The heat and power integration potentials are investigated using Pinch Analysis tools. Three cases have been investigated: the steam production potential from the SNG process excess heat, the electricity production potential by maximizing the heat recovery in the SNG process without additional fuel firing, and the electricity production potential with increased steam cycle efficiency and additional fuel firing. The results show that 217 MWLHV of woody biomass are required to substitute the site's natural gas demand with SNG (162 MWLHV). The results indicate that excess heat from the SNG process has the potential to completely cover the site's net steam demand (19 MW) or to produce enough electricity to cover the demand of the SNG process (21 MW el). The study also shows that it is possible to fully exploit the heat pockets in the SNG process Grand Composite Curve (GCC) resulting in an increase of the steam cycle electricity output. In this case, there is a potential to cover the site's net steam demand and to produce 30 MWel with an efficiency of 1 MWel/MWadded heat. However, this configuration requires combustion of 36 MWLHV of additional fuel, resulting in a marginal generation efficiency of 0.80 MW el/MWfuel (i.e. comparing the obtained electricity production potentials with and without additional fuel firing).
|
|
9. |
- Axelsson, Erik Marcus Kristian, 1974, et al.
(author)
-
ENPAC, a tool for constructing energy market scenarios
- 2011
-
In: Methods and Models - used in the project Pathways to Sustainable European Energy Systems. - 9789197858526 ; , s. 137-140
-
Book chapter (other academic/artistic)
|
|
10. |
- Berntsson, Thore, 1947, et al.
(author)
-
Application of Process Integration to the Synthesis of Heat and Power Utility Systems Including Combined Heat and Power (CHP) and Industrial Heat Pumps
- 2013
-
In: Woodhead Publishing Series in Energy - Handbook of Process Integration (PI). - : Elsevier. - 9780857095930 ; , s. 168-200
-
Book chapter (other academic/artistic)abstract
- This chapter discusses the main aspects of application of Pinch Analysis to the analysis and synthesis of heat and power utility systems for industrial processes. The chapter first reviews the basic concepts for the use of the Process Grand Composite Curve as a targeting tool. The chapter then discusses the application of this tool for synthesis and design of utility systems of main relevance in industrial practice, such as centralised heating systems, Combined Heat and Power (CHP) production system and industrial heat pumps.
|
|