1. |
- Abbondanza, Giuseppe, 1991, et al.
(author)
-
Au-Pd Barcode Nanowires with Tailored Lattice Parameters and Segment Lengths for Catalytic Applications
- 2024
-
In: ACS Applied Nano Materials. - 2574-0970. ; 7:4, s. 3861-3874
-
Journal article (peer-reviewed)abstract
- In this study, we present a systematic investigation of the controlled fabrication of Au-Pd barcode nanowires within nanoporous anodic aluminum oxide (NP-AAO) templates. By using a combination of in situ X-ray diffraction (XRD), focused ion beam scanning electron microscopy (FIB-SEM), and transmission electron microscopy (TEM), we elucidate the influence of template preparation methods on the resulting nanowire properties. The template treatment, involving either pore widening or barrier layer thinning, significantly impacts nanowire growth. Through the analysis of the XRD data, we observe sequential deposition of Au and Pd segments with lattice parameter variations and strain effects. Particularly, the lattice parameters of Au and Pd segments display intricate temporal dependencies, influenced by interfacial effects and strain caused by growth under confinement. FIB-SEM imaging reveals uniform and reproducible nanowire lengths in the template treated with pore widening. Furthermore, TEM analysis confirms the presence of distinct Au and Pd segments, while scanning TEM-energy-dispersive X-ray spectroscopy revealed minor evidence of interdiffusion between the first and the second electrodeposited segments. Our findings emphasize the potential of the electrodeposition process within nanoporous templates for producing barcode nanowires with precise segmental properties. The combination of in situ XRD and electron microscopy offers valuable insights into the growth dynamics and structural characteristics of the fabricated Au-Pd barcode nanowires. This controlled fabrication strategy opens doors to tailoring nanowire properties for diverse applications, particularly in catalysis.
|
|
2. |
- Abbondanza, Giuseppe, et al.
(author)
-
Templated electrodeposition as a scalable and surfactant-free approach to the synthesis of Au nanoparticles with tunable aspect ratios
- 2022
-
In: Nanoscale Advances. - : Royal Society of Chemistry. - 2516-0230. ; 4:11, s. 2452-2467
-
Journal article (peer-reviewed)abstract
- A high-throughput method for the fabrication of ordered arrays of Au nanoparticles is presented. It is based on pulsed electrodeposition into porous anodic alumina templates. In contrast to many synthesis routes, it is cyanide-free, prior separation of the alumina template from the aluminium substrate is not required, and the use of contaminating surfactants/capping agents often found in colloidal synthesis is avoided. The aspect ratio of the nanoparticles can also be tuned by selecting an appropriate electrodeposition time. We show how to fabricate arrays of nanoparticles, both with branched bases and with hemispherical bases. Furthermore, we compare the different morphologies produced with electron microscopies and grazing-incidence synchrotron X-ray diffraction. We find the nanoparticles are polycrystalline in nature and are compressively strained perpendicular to the direction of growth, and expansively strained along the direction of growth. We discuss how this can produce dislocations and twinning defects that could be beneficial for catalysis.
|
|
3. |
- Bermeo, Marie, et al.
(author)
-
Branched-gallium phosphide nanowires seeded by palladium nanoparticles
- 2023
-
In: Nanotechnology. - 0957-4484. ; 34:39
-
Journal article (peer-reviewed)abstract
- Palladium nanoparticles were produced by a chemical reagent-free and versatile method called spark ablation with control over particle size and density. These nanoparticles were used as catalytic seed particles for gallium phosphide nanowire growth by metalorganic vapour-phase epitaxy. Controlled growth of GaP nanowires using significantly small Pd nanoparticles between 10 and 40 nm diameter was achieved by varying several growth parameters. Low V/III ratios below 2.0 promote higher Ga incorporation into the Pd nanoparticles. Moderate growth temperatures under 600 °C avoid kinking and undesirable GaP surface growth. In addition, a second batch of palladium nanoparticles of concentration up to 1000 particles μm−2 was deposited onto the GaP nanowires. Subsequently, three-dimensional nanostructures evolved, with branches growing along the surface of the GaP nanowires. The GaP nanowires revealed a zinc blende structure with multiple twinning and a PdGa phase at the tip of the nanowires and branches.
|
|
4. |
- Dubackic, Marija, et al.
(author)
-
α-Synuclein Interaction with Lipid Bilayer Discs
- 2022
-
In: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 38:33, s. 10216-10224
-
Journal article (peer-reviewed)abstract
- α-Synuclein (aSyn) is a 140 residue long protein present in presynaptic termini of nerve cells. The protein is associated with Parkinson's disease, in which case it has been found to self-Assemble into long amyloid fibrils forming intracellular inclusions that are also rich in lipids. Furthermore, its synaptic function is proposed to involve interaction with lipid membranes, and hence, it is of interest to understand aSyn-lipid membrane interactions in detail. In this paper we report on the interaction of aSyn with model membranes in the form of lipid bilayer discs. Using a combination of cryogenic transmission electron microscopy and small-Angle neutron scattering, we show that circular discs undergo a significant shape transition after the adsorption of aSyn. When aSyn self-Assembles into fibrils, aSyn molecules desorb from the bilayer discs, allowing them to recover to their original shape. Interestingly, the desorption process has an all-or-none character, resulting in a binary coexistence of circular bilayer discs with no adsorbed aSyn and deformed bilayer discs having a maximum amount of adsorbed protein. The observed coexistence is consistent with the recent finding of cooperative aSyn adsorption to anionic lipid bilayers.
|
|
5. |
- Larsson, Alfred, et al.
(author)
-
Electrochemical Fabrication and Characterization of Palladium Nanowires in Nanoporous Alumina Templates
- 2020
-
In: Journal of the Electrochemical Society. - : The Electrochemical Society. - 0013-4651 .- 1945-7111. ; 167:12
-
Journal article (peer-reviewed)abstract
- A method for the electrochemical synthesis of palladium nanowires, using porous alumina templates with diameters of 25 nm and 40 nm, is presented. Through an electrochemical barrier layer thinning step, pulsed electrodeposition can take place directly into the anodized aluminum; without need for extra removal, pore opening, and metal contact coating steps. A digital oscilloscope is used to record and integrate the current, allowing the efficiency of the electrodeposition to be calculated. We discuss how using a large 'off period' allows for the replenishment of the depleted diffusion layer. The nanowires are characterized by using a focused ion beam (FIB) to create cross-sections which can be accessed with a scanning electron microscope (SEM). With grazing-incidence X-ray diffraction (GI-XRD) we find that the nanowires have a slight compressive strain in the direction that they are confined by the pores (0.58 % and 0.51 % for the 25 nm and 40 nm pores respectively). Knowing the strain state of the nanowires inside the template is of importance for the use of templated nanowires in devices. Further characterization is made using high-resolution transmission electron microscopy (HR-TEM) and energy dispersive X-ray spectroscopy (EDS), after removal from the alumina templates.
|
|
6. |
- Menon, Heera, et al.
(author)
-
Fabrication of Single-Crystalline InSb-on-Insulator by Rapid Melt Growth
- 2022
-
In: Physica Status Solidi (A) Applications and Materials Science. - : Wiley. - 1862-6300. ; 219:4
-
Journal article (peer-reviewed)abstract
- InSb has the smallest bandgap and highest electron mobility among III-V semiconductors and is widely used for photodetectors and high-frequency electronic applications. Integration of InSb directly on Si would drastically reduce the fabrication cost and enable new applications, however, it is very challenging due to its 19% lattice mismatch with Si. Herein, the integration of single-crystalline InSb microstructures on insulator-covered Si through rapid melt growth (RMG) is reported and specifically provides details on the fabrication process. The importance of achieving high-quality conformal capping layers at low thermal budget to contain the InSb melt is assessed when the sample is annealed. The importance of ensuring a pristine Si seed area to achieve single-crystalline InSb is illustrated and demonstrated here for the first time.
|
|
7. |
- Mikkelä, Mikko-Heikki, et al.
(author)
-
Bismuth-oxide nanoparticles: study in a beam and as deposited
- 2024
-
In: Physical chemistry chemical physics : PCCP. - 1463-9084. ; 26:13, s. 10369-10381
-
Journal article (peer-reviewed)abstract
- Bi2O3 is a promising material for solid-oxide fuel cells (SOFC) due to the high ionic conductivity of some phases. The largest value is reached for its δ-phase, but it is normally stable at temperatures too high for SOFC operation, while nanostructured oxide is believed to have more suitable stabilization temperature. However, to manufacture such a material with a controlled chemical composition is a challenging task. In this work, we investigated the fabrication of nanostructured Bi2O3 films formed by deposition of free Bi-oxide nanoparticles created in situ. The particle-production method was based on reactive sputtering and vapour aggregation. Depending on the fabrication conditions, the nanoparticles contained either a combination of Bi–metal and Bi-oxide, or only Bi-oxide. Prior to deposition, the free particles were probed in the beam – by synchrotron-based photoelectron spectroscopy (PES), which allowed assessing their composition “on the-fly”. The nanoparticle films obtained after deposition were studied by PES, scanning electron microscopy, transmission electron microscopy, and electron diffraction. The films' chemical composition, grain dimensions, and crystal structure were probed. Our analysis suggests that our method produced Bi-oxide films in more than one polymorph of Bi2O3.
|
|
8. |
- Wallenberg, Reine, et al.
(author)
-
In situ metal-organic chemical vapour deposition growth of III–V semiconductor nanowires in the Lund environmental transmission electron microscope
- 2020
-
In: Semiconductor Science and Technology. - : IOP Publishing. - 0268-1242 .- 1361-6641. ; 35:3
-
Journal article (peer-reviewed)abstract
- A new environmental transmission electron microscope has been installed in Lund in order to investigate the growth of III-V semiconductor nanowires by metal-organic chemical vapour deposition. We report here on the concepts behind the design of the facility and on details of the operation, and we refer to early results to highlight the new information that can be accessed from in situ studies. The installation includes a gas handling system that delivers the precursors to III-V semiconductor growth under controlled conditions. The core microscope is a Hitachi HF-3300S 300 kV TEM with additional pumping that can handle up to 6 Pa of gas injected into the specimen area, or up to 400 Pa if an apertured lid is fitted to the holder. Various custom specimen holders incorporate precursor gas lines, a heating chip or a double tilt mechanism. The polepiece gap has been expanded to accommodate the holders, while the combination of an imaging aberration corrector and a cold field emission gun delivers a point resolution of 86 pm. Single images with atomic level detail are collected by one camera while another camera provides real-time video recording. A scanning unit offers high angle annular dark field and secondary electron images, and compositional microanalysis is performed with energy dispersive spectroscopy. In summary, III-V nanowires have been grown successfully in situ across a range of controlled conditions such as substrate temperature and precursor partial pressures. Atomic resolution images and movies, and spectroscopy data taken during this growth allow detailed measurements of structures, compositions and growth rates – data that are otherwise hard or impossible to obtain from ex situ studies – and further our understanding of the mechanisms of crystal growth.
|
|
9. |
- Zhang, Zhaojun, et al.
(author)
-
Free-Standing Metal Halide Perovskite Nanowire Arrays with Blue-Green Heterostructures
- 2022
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 22:7, s. 2941-2947
-
Journal article (peer-reviewed)abstract
- Vertically aligned metal halide perovskite (MHP) nanowires are promising for various optoelectronic applications, which can be further enhanced by heterostructures. However, present methods to obtain free-standing vertically aligned MHP nanowire arrays and heterostructures lack the scalability needed for applications. We use a low-temperature solution process to prepare free-standing vertically aligned green-emitting CsPbBr3 nanowires from anodized aluminum oxide templates. The length is controlled from 1 to 20 μm by the precursor amount. The nanowires are single-crystalline and exhibit excellent photoluminescence, clear light guiding and high photoconductivity with a responsivity of 1.9 A/W. We demonstrate blue-green heterostructured nanowire arrays by converting the free-standing part of the nanowires to CsPbCl1.1Br1.9 in an anion exchange process. Our results demonstrate a scalable, self-aligned, and lithography-free approach to achieve high quality free-standing MHP nanowires arrays and heterostructures, offering new possibilities for optoelectronic applications.
|
|
10. |
- Zhang, Zhaojun, et al.
(author)
-
Single-Crystalline Perovskite Nanowire Arrays for Stable X-ray Scintillators with Micrometer Spatial Resolution
- 2022
-
In: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 5:1, s. 881-889
-
Journal article (peer-reviewed)abstract
- X-ray scintillation detectors based on metal halide perovskites have shown excellent light yield, but they mostly target applications with spatial resolution at the tens of micrometers level. Here, we use a one-step solution method to grow arrays of 15-μm-long single-crystalline CsPbBr3 nanowires (NWs) in an AAO (anodized aluminum oxide) membrane template, with nanowire diameters ranging from 30 to 360 nm. The CsPbBr3 nanowires in AAO (CsPbBr3 NW/AAO) show increasing X-ray scintillation efficiency with decreasing nanowire diameter, with a maximum photon yield of ∼5 »300 ph/MeV at 30 nm diameter. The CsPbBr3 NW/AAO composites also display high radiation resistance, with a scintillation-intensity decrease of only ∼20-30% after 24 h of X-ray exposure (integrated dose 162 Gyair) and almost no change after ambient storage for 2 months. X-ray images can distinguish line pairs with a spacing of 2 μm for all nanowire diameters, while slanted edge measurements show a spatial resolution of ∼160 lp/mm at modulation transfer function (MTF) = 0.1. The combination of high spatial resolution, radiation stability, and easy fabrication makes these CsPbBr3 NW/AAO scintillators a promising candidate for high-resolution X-ray imaging applications.
|
|