1. |
- Tran, Ngoc Hieu, et al.
(author)
-
Genetic profiling of Vietnamese population from large-scale genomic analysis of non-invasive prenatal testing data
- 2020
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 10:1
-
Journal article (peer-reviewed)abstract
- The under-representation of several ethnic groups in existing genetic databases and studies have undermined our understanding of the genetic variations and associated traits or diseases in many populations. Cost and technology limitations remain the challenges in performing large-scale genome sequencing projects in many developing countries, including Vietnam. As one of the most rapidly adopted genetic tests, non-invasive prenatal testing (NIPT) data offers an alternative untapped resource for genetic studies. Here we performed a large-scale genomic analysis of 2683 pregnant Vietnamese women using their NIPT data and identified a comprehensive set of 8,054,515 single-nucleotide polymorphisms, among which 8.2% were new to the Vietnamese population. Our study also revealed 24,487 disease-associated genetic variants and their allele frequency distribution, especially 5 pathogenic variants for prevalent genetic disorders in Vietnam. We also observed major discrepancies in the allele frequency distribution of disease-associated genetic variants between the Vietnamese and other populations, thus highlighting a need for genome-wide association studies dedicated to the Vietnamese population. The resulted database of Vietnamese genetic variants, their allele frequency distribution, and their associated diseases presents a valuable resource for future genetic studies.
|
|
2. |
- Duy, Nguyen Van, et al.
(author)
-
Design and fabrication of effective gradient temperature sensor array based on bilayer SnO2/Pt for gas classification
- 2022
-
In: Sensors and actuators. B, Chemical. - : Elsevier. - 0925-4005 .- 1873-3077. ; 351
-
Journal article (peer-reviewed)abstract
- Classification of different gases is important, and it is possible to use different gas sensors for this purpose. Electronic noses, for example, combine separated gas sensors into an array for detecting different gases. However, the use of separated sensors in an array suffers from being bulky, high-energy consumption and complex fabrication processes. Generally, gas sensing properties, including gas selectivity, of semiconductor gas sensors are strongly dependent on their working temperature. It is therefore feasible to use a single device composed of identical sensors arranged in a temperature gradient for classification of multiple gases. Herein, we introduce a design for simple fabrication of gas sensor array based on bilayer Pt/SnO2 for real-time monitoring and classification of multiple gases. The study includes design simulation of the sensor array to find an effective gradient temperature, fabrication of the sensors and test of their performance. The array, composed of five sensors, was fabricated on a glass substrate without the need of backside etching to reduce heat loss. A SnO2 thin film sensitized with Pt on top deposited by sputtering was used as sensing material. The sensor array was tested against different gases including ethanol, methanol, isopropanol, acetone, ammonia, and hydrogen. Radar plots and principal component analysis were used to visualize the distinction of the tested gases and to enable effective classification.
|
|
3. |
- Nguyen, Xuan Thai, et al.
(author)
-
Gas sensor array based on tin oxide nano structure for volatile organic compounds detection
- 2020
-
In: Vietnam Journal of Science and Technology. - : Vietnam Academy of Science and Technology. - 2525-2518. ; 58:2, s. 189-196
-
Journal article (peer-reviewed)abstract
- The detection of volatile organic compounds (VOCs) is essential in practicalapplication in breath analysis. Thus, gas sensors based on metal oxide have been fabricated, butthey lacked selectivity. One approach to resolve this task is to use an array of highly sensitiveand selective sensors as an electronic nose. Here a gas sensor array based on Tin oxide nanostructurewith temperature modulation techniques was presented. A Platinum micro-heater isaccompanied with the array gas sensor. The gas sensor array was composed of five singlesensors, and that single sensor is located at different site from the micro heater and works atdifferent temperatures. The gas sensing properties of the gas array sensors were investigatedwith VOC gases such as Ethanol, Methanol, Iso-propanol, and Acetone as well as NH3, H2, andH2S. We also confirm the good selectivity of the array sensor for Ethanol, Methanol, Isopropanol,Acetone, NH3, H2, and H2S by using radar graphic method.
|
|
4. |
- Son, Dang Ngoc, et al.
(author)
-
A novel design and fabrication of self-heated In2O3 nanowire gas sensor on for ethanol detection
- 2022
-
In: Sensors and Actuators A-Physical. - : Elsevier. - 0924-4247 .- 1873-3069. ; 345
-
Journal article (peer-reviewed)abstract
- Many attempts have been made on the design and fabrication of low-power consumption gas sensor for application on the Internet of Things and portable devices. The performance of gas sensors includes sensitivity, selectivity, and power consumption, which are strongly dependent on the configuration of the device such as the gap size between two electrodes, the sensing material, and operation principle. Here, self-heated In2O3 nanowire-based gas sensors were designed and fabricated by on-chip growth technique via thermal evaporation to work at room temperature. The effect of electrode gap (10-40 mu m) on the power consumption and gas sensing performance of the In2O3 nanowire sensors was studied. With the large gap of 40 mu m, the sensor exhibited excellent sensing characteristics of low power consumption (1.06 mW) with ability to detect ethanol gas down to 20 ppm effectively. We also examined the role of nanowire conductivity in the performance of the self-heated sensor in the detection of reducing gas. The sensor demonstrated rapid response and recovery times of less than a minute, exceptional stability, and remarkable recovery.
|
|
5. |
- Thai, Nguyen Xuan, et al.
(author)
-
Prototype edge-grown nanowire sensor array for the real-time monitoring and classification of multiple gases
- 2020
-
In: JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES. - : VIETNAM NATL UNIV. - 2468-2284 .- 2468-2179. ; 5:3, s. 409-416
-
Journal article (peer-reviewed)abstract
- The monitoring and classification of different gases using a single resistive semiconductor sensor are challenging because of the similar response characteristics. An array of separated sensors can be used as an electronic nose, but such arrays have a bulky structure and complex fabrication processes. Herein, we easily fabricated a gas-sensor array based on edge-grown SnO2 nanowires for the real-time monitoring and classification of multiple gases. The array comprised four sensors and was designed on a glass substrate. SnO2 nanowires were grown on-chip from the edge of electrodes, made contact together, and acted as sensing elements. This method was advantageous over the post-synthesis technique because the SnO2 nanowires were directly grown from the edge of the electrodes rather than on the surface. Accordingly, damage to the electrode was avoided by alloying Sn with Pt at a high growth temperature. The sensing characteristics of the sensor array were further examined for different gases, including methanol, isopropanol, ethanol, ammonia, hydrogen sulphide and hydrogen. Radar plots were used to improve the selective detection of different gases and enable effective classification. (C) 2020 The Authors. Publishing services by Elsevier B.V. on behalf of Vietnam National University, Hanoi.
|
|
6. |
- Thai, Nguyen Xuan, et al.
(author)
-
Realization of a portable H2S sensing instrument based on SnO2 nanowires
- 2020
-
In: Journal of Science: Advanced Materials and Devices. - : Elsevier BV. - 2468-2284 .- 2468-2179. ; 5:1, s. 40-47
-
Journal article (peer-reviewed)abstract
- Monitoring of toxic gas in air is important because air pollution, especially in developing countries, has rapidly become severe. The high cost of installation and maintenance of a stationary analysis system by using methods such as gas chromatography limits its applications. Low-power, portable devices with relatively low-cost gas sensors are effective for mapping pollution levels in real-time in urban areas and in other living environmentts. Herein, the realization of a portable H2S sensing instrument based on SnO2 nanowires is reported. The sensor chip was prepared by the on-chip growth of SnO2 nanowires directly from the edges of Pt electrodes. The electronic system and software for signal acquisition, data processing, data storage, and output of the instrument were developed. A prototype for zero series of the instrument was also realized. The instrument is capable of monitoring H2S gas in air at ppm level and in biogas production with satisfation.
|
|
7. |
- Dung, Nguyen Van, et al.
(author)
-
Exploring novel hybrid soft computing models for landslide susceptibility mapping in Son La hydropower reservoir basin
- 2021
-
In: Geomatics, Natural Hazards and Risk. - : Taylor & Francis. - 1947-5705 .- 1947-5713. ; 12:1, s. 1688-1714
-
Journal article (peer-reviewed)abstract
- In this study, two novel hybrid models namely Bagging-based Rough Set (BRS) and AdaBoost-based Rough Set (ABRS) were used to generate landslide susceptibility maps of Son La hydropower reservoir basin, Vietnam. In total, 186 past landslide events and twelve landslides affecting factors (slope degree, slope aspect, elevation, curvature, focal flow, river density, rainfall, aquifer, weathering crust, lithology, fault density and road density) were considered in the modeling study. The landslide data was split into training (70%) and testing (30%) for the model's development and validation. One R feature selection method was used to select and prioritize the landslide affecting factors based on their importance in model prediction. Performance of the hybrid developed models was evaluated and also compared with single rough set (RS) and support vector machine (SVM) models using various standard statistical measures including area under the curve (AUC)-receiver operating characteristics (ROC) curve. The results show that the developed hybrid model BRS (AUC = 0.845) is the most accurate model in comparison to other models (ABRS, SVM and RS) in predicting landslide susceptibility. Therefore, the BRS model can be used as an effective tool in the development of an accurate landslide susceptibility map of the hilly area.
|
|
8. |
- Duoc, Vo Thanh, et al.
(author)
-
Room temperature highly toxic NO2 gas sensors based on rootstock/scion nanowires of SnO2/ZnO, ZnO/SnO2, SnO2/SnO2 and, ZnO/ZnO
- 2021
-
In: Sensors and actuators. B, Chemical. - : Elsevier. - 0925-4005 .- 1873-3077. ; 348
-
Journal article (peer-reviewed)abstract
- Grafted structures between SnO2 and ZnO nanowires were realized in a two-step process of growth. First, the rootstocks of SnO2 or ZnO nanowires were synthesized by thermal evaporation technique. Second, a thin Au layer was sputter deposited on the sample and synthesis of nanowire scions of ZnO or SnO2, respectively, on the rootstocks was realized by thermal evaporation technique again. In both growth steps, SnO2 powder or a mixture of ZnO and carbon powders was use as source materials for the synthesis. Different rootstock/scion combinations of SnO2/ZnO, ZnO/SnO2 nanowires (called heterostructures) and ZnO/ZnO, SnO2/SnO2 nanowires (called homostructures) were synthesised. The fabricated grafted nanowires were examined by field-emission scanning electron microscope and their compositions were analyzed by energy dispersive spectroscopy and X-ray diffraction analysis. The test results indicate that this type of nanostructure material is very promising for NO2 gas sensing at ppt level at room temperature. Among the fabricated structures the SnO2/ZnO nanowires showed the best sensing performance with the high sensitivity and fast response and recovery time. We also discussed the gas sensing mechanism of the fabricated sensors based on the band diagram.
|
|
9. |
- Nguyen, Tan N., et al.
(author)
-
Physical Layer Security in AF-Based Cooperative SWIPT Sensor Networks
- 2023
-
In: IEEE Sensors Journal. - : Institute of Electrical and Electronics Engineers (IEEE). - 1530-437X. ; 23:1, s. 689-705
-
Journal article (peer-reviewed)abstract
- Physical layer security (PLS) with radio frequency (RF) energy harvesting (EH) in wireless sensor networks has received significant interest as a technology for secure information transmission and prolonging the network lifetime, as well as improving energy efficiency. This article investigates PLS for a simultaneous wireless information and power transfer (SWIPT) cooperative network, which consists of multiple sensor sources, one EH relay (R), and one destination (D) in the presence of one eavesdropper (E). Furthermore, a low-complexity, suboptimal, yet efficient sensor source selection scheme is proposed. Specifically, one sensor source is chosen to transmit information to the relay and destination such that it obtains the best channel from sensor sources to the relay. Then, by considering two relaying strategies, termed the direct link plus static power splitting-based relaying (SPSR) and direct link plus optimal dynamic power splitting-based relaying (ODPSR), the performance analysis in terms of intercept probability (IP) and outage probability (OP) is carried out for each one. Notably, the eavesdropper and destination utilize maximal ratio combining (MRC) to incorporate the received signals from the selected sensor source and the relay, which poses new challenges in obtaining the analytical expressions. In this context, we derive analytical expressions for the OP (for SPSR and ODPSR) at the destination and the IP (for SPSR) at the eavesdropper by adopting the series representation of the modified Bessel function. Finally, Monte Carlo simulations are conducted to validate the theoretical analysis and the proposed schemes' effectiveness. Simulation results show the superiority of our scheme compared to the benchmarks.
|
|
10. |
- Tran, Quoc Cuong, et al.
(author)
-
Novel Ensemble Landslide Predictive Models Based on the Hyperpipes Algorithm : A Case Study in the Nam Dam Commune, Vietnam
- 2020
-
In: Applied Sciences. - Switzerland : MDPI. - 2076-3417. ; 10:11
-
Journal article (peer-reviewed)abstract
- Development of landslide predictive models with strong prediction power has become a major focus of many researchers. This study describes the first application of the Hyperpipes (HP) algorithm for the development of the five novel ensemble models that combine the HP algorithm and the AdaBoost (AB), Bagging (B), Dagging, Decorate, and Real AdaBoost (RAB) ensemble techniques for mapping the spatial variability of landslide susceptibility in the Nam Dan commune, Ha Giang province, Vietnam. Information on 76 historical landslides and ten geo-environmental factors (slope degree, slope aspect, elevation, topographic wetness index, curvature, weathering crust, geology, river density, fault density, and distance from roads) were used for the construction of the training and validation datasets that are the prerequisites for building and testing the proposed models. Using different performance metrics (i.e., the area under the receiver operating characteristic curve (AUC), negative predictive value, positive predictive value, accuracy, sensitivity, specificity, root mean square error, and Kappa), we verified the proficiency of all five ensemble learning techniques in increasing the fitness and predictive powers of the base HP model. Based on the AUC values derived from the models, the ensemble ABHP model that yielded an AUC value of 0.922 was identified as the most efficient model for mapping the landslide susceptibility in the Nam Dan commune, followed by RABHP (AUC = 0.919), BHP (AUC = 0.909), Dagging-HP (AUC = 0.897), Decorate-HP (AUC = 0.865), and the single HP model (AUC = 0.856), respectively. The novel ensemble models proposed for the Nam Dan commune and the resultant susceptibility maps can aid land-use planners in the development of efficient mitigation strategies in response to destructive landslides.
|
|