| 1. |
|
|
| 2. |
- Matthews, G. F., et al.
(author)
-
Overview of the ITER-like wall project
- 2007
-
In: Physica Scripta. - 0031-8949 .- 1402-4896. ; T128, s. 137-143
-
Journal article (peer-reviewed)abstract
- Work is in progress to completely replace, in 2008/9, the existing JET CFC tiles with a configuration of plasma facing materials consistent with the ITER design. The ITER-like wall (ILW) will be created with a combination of beryllium ( Be), tungsten ( W), W-coated CFC and Be-coated inconel tiles, with the material depending on the local anticipated heat flux and geometry. It is part of an integrated package of JET enhancements whose aim is to develop an understanding of the ITER materials issues and develop the techniques required to operate with inductive and advanced scenarios as close as possible to ITER parameters. Over 4000 tiles will be replaced and the ILW will accommodate additional heating up to at least 50 MW for 10 s. This paper describes the scientific background to the project, the technical objectives, the material configuration selected, the R&D behind the practical realization of the objectives and the generic problems associated with the Be tiles ( power handling capacity and disruption induced eddy currents). One of the objectives is to maintain or improve the existing CFC tile power handling performance which has been achieved in most cases by hiding bolt holes, optimizing tile size and profile and introducing castellations on plasma facing surfaces.
|
|
| 3. |
- Sergienko, G., et al.
(author)
-
Experience with bulk tungsten test-limiters under high heat loads : melting and melt layer propagation
- 2007
-
In: Physica Scripta. - 0031-8949 .- 1402-4896. ; T128, s. 81-86
-
Journal article (peer-reviewed)abstract
- The paper provides an overview of processes and underlying physics governing tungsten melt erosion in the fusion plasma environment. Experiments with three different bulk tungsten test-limiters were performed in TEXTOR: (i) thermally insulated solid plate fixed on a graphite roof-like limiter heated up by the plasma to the melting point, (ii) macro-brush of the ITER-relevant castellated structure and (iii) lamellae structure developed for the JET divertor. The main objectives were to determine the metal surface damage, the formation of the melt layer and its motion in the magnetic field. PHEMOBRID-3D and MEMOS-1.5D numerical codes were used to simulate the experiment with the roof-like test-limiter. Both experiments and simulation showed that the melting of tungsten can lead to a large material redistribution due to thermo-electron emission currents without ejection of molten material to the plasma.
|
|
| 4. |
- Teuten, Emma L, et al.
(author)
-
Transport and release of chemicals from plastics to the environment and to wildlife
- 2009
-
In: PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES. - : The Royal Society. - 0962-8436 .- 1471-2970. ; 364:1526, s. 2027-2045
-
Journal article (peer-reviewed)abstract
- Plastics debris in the marine environment, including resin pellets, fragments and microscopic plastic fragments, contain organic contaminants, including polychlorinated biphenyls ( PCBs), polycyclic aromatic hydrocarbons, petroleum hydrocarbons, organochlorine pesticides (2,2-bis(p-chlorophenyl)-1,1,1-trichloroethane, hexachlorinated hexanes), polybrominated diphenylethers, alkylphenols and bisphenol A, at concentrations from sub ng g(-1) to mg g(-1). Some of these compounds are added during plastics manufacture, while others adsorb from the surrounding seawater. Concentrations of hydrophobic contaminants adsorbed on plastics showed distinct spatial variations reflecting global pollution patterns. Model calculations and experimental observations consistently show that polyethylene accumulates more organic contaminants than other plastics such as polypropylene and polyvinyl chloride. Both a mathematical model using equilibrium partitioning and experimental data have demonstrated the transfer of contaminants from plastic to organisms. A feeding experiment indicated that PCBs could transfer from contaminated plastics to streaked shearwater chicks. Plasticizers, other plastics additives and constitutional monomers also present potential threats in terrestrial environments because they can leach from waste disposal sites into groundwater and/or surface waters. Leaching and degradation of plasticizers and polymers are complex phenomena dependent on environmental conditions in the landfill and the chemical properties of each additive. Bisphenol A concentrations in leachates from municipal waste disposal sites in tropical Asia ranged from sub mu g l(-1) to mg l(-1) and were correlated with the level of economic development.
|
|
