1. |
- Auroux, Etienne, et al.
(author)
-
A metal-free and transparent light-emitting device by sequential spray-coating fabrication of all layers including PEDOT:PSS for both electrodes
- 2023
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 13:25, s. 16943-16951
-
Journal article (peer-reviewed)abstract
- The concept of a metal-free and all-organic electroluminescent device is appealing from both sustainability and cost perspectives. Herein, we report the design and fabrication of such a light-emitting electrochemical cell (LEC), comprising a blend of an emissive semiconducting polymer and an ionic liquid as the active material sandwiched between two poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS) conducting-polymer electrodes. In the off-state, this all-organic LEC is highly transparent, and in the on-state, it delivers uniform and fast to turn-on bright surface emission. It is notable that all three device layers were fabricated by material- and cost-efficient spray-coating under ambient air. For the electrodes, we systematically investigated and developed a large number of PEDOT:PSS formulations. We call particular attention to one such p-type doped PEDOT:PSS formulation that was demonstrated to function as the negative cathode, as well as future attempts towards all-organic LECs to carefully consider the effects of electrochemical doping of the electrode in order to achieve optimum device performance.
|
|
2. |
- Huseynova, Gunel, et al.
(author)
-
Chemical doping to control the in-situ formed doping structure in light-emitting electrochemical cells
- 2023
-
In: Scientific Reports. - : Springer Nature. - 2045-2322. ; 13:1
-
Journal article (peer-reviewed)abstract
- The initial operation of a light-emitting electrochemical cell (LEC) constitutes the in-situ formation of a p-n junction doping structure in the active material by electrochemical doping. It has been firmly established that the spatial position of the emissive p-n junction in the interelectrode gap has a profound influence on the LEC performance because of exciton quenching and microcavity effects. Hence, practical strategies for a control of the position of the p-n junction in LEC devices are highly desired. Here, we introduce a "chemical pre-doping" approach for the rational shifting of the p-n junction for improved performance. Specifically, we demonstrate, by combined experiments and simulations, that the addition of a strong chemical reductant termed "reduced benzyl viologen" to a common active-material ink during LEC fabrication results in a filling of deep electron traps and an associated shifting of the emissive p-n junction from the center of the active material towards the positive anode. We finally demonstrate that this chemical pre-doping approach can improve the emission efficiency and stability of a common LEC device.
|
|