1. |
|
|
2. |
- Kilpeläinen, Tuomas O, et al.
(author)
-
Genome-wide meta-analysis uncovers novel loci influencing circulating leptin levels
- 2016
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 7
-
Journal article (peer-reviewed)abstract
- Leptin is an adipocyte-secreted hormone, the circulating levels of which correlate closely with overall adiposity. Although rare mutations in the leptin (LEP) gene are well known to cause leptin deficiency and severe obesity, no common loci regulating circulating leptin levels have been uncovered. Therefore, we performed a genome-wide association study (GWAS) of circulating leptin levels from 32,161 individuals and followed up loci reaching P<10(-6) in 19,979 additional individuals. We identify five loci robustly associated (P<5 × 10(-8)) with leptin levels in/near LEP, SLC32A1, GCKR, CCNL1 and FTO. Although the association of the FTO obesity locus with leptin levels is abolished by adjustment for BMI, associations of the four other loci are independent of adiposity. The GCKR locus was found associated with multiple metabolic traits in previous GWAS and the CCNL1 locus with birth weight. Knockdown experiments in mouse adipose tissue explants show convincing evidence for adipogenin, a regulator of adipocyte differentiation, as the novel causal gene in the SLC32A1 locus influencing leptin levels. Our findings provide novel insights into the regulation of leptin production by adipose tissue and open new avenues for examining the influence of variation in leptin levels on adiposity and metabolic health.
|
|
3. |
|
|
4. |
|
|
5. |
- Davour, Anna, et al.
(author)
-
Applying image analysis techniques to tomographic images of irradiated nuclear fuel assemblies
- 2016
-
In: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 96, s. 223-229
-
Journal article (peer-reviewed)abstract
- In this paper we present a set of image analysis techniques used for extraction of information from cross-sectional images of nuclear fuel assemblies, achieved from gamma emission tomography measurements. These techniques are based on template matching, an established method for identifying objects with known properties in images.We demonstrate a rod template matching algorithm for identification and counting of the fuel rods present in the image. This technique may be applicable in nuclear safeguards inspections, because of the potential of verifying the presence of all fuel rods, or potentially discovering any that are missing.We also demonstrate the accurate determination of the position of a fuel assembly, or parts of the assembly, within the imaged area. Accurate knowledge of the assembly position enables detailed modelling of the gamma transport through the fuel, which in turn is needed to make tomographic reconstructions quantifying the activity in each fuel rod with high precision.Using the full gamma energy spectrum, details about the location of different gamma-emitting isotopes within the fuel assembly can be extracted. We also demonstrate the capability to determine the position of supporting parts of the nuclear fuel assembly through their attenuating effect on the gamma rays emitted from the fuel. Altogether this enhances the capabilities of non-destructive nuclear fuel characterization.
|
|
6. |
- Favalli, Andrea, et al.
(author)
-
Determining initial enrichment, burnup, and cooling time of pressurized-water-reactor spent fuel assemblies by analyzing passive gamma spectra measured at the Clab interim-fuel storage facility in Sweden
- 2016
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 820, s. 102-111
-
Journal article (peer-reviewed)abstract
- The purpose of the Next Generation Safeguards Initiative (NGSI)–Spent Fuel (SF) project is to strengthen the technical toolkit of safeguards inspectors and/or other interested parties. The NGSI–SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins; (3) estimate the plutonium mass [which is also a function of the variables in (1)]; (4) estimate the decay heat; and (5) determine the reactivity of spent fuel assemblies. Since August 2013, a set of measurement campaigns has been conducted at the Central Interim Storage Facility for Spent Nuclear Fuel (Clab), in collaboration with Swedish Nuclear Fuel and Waste Management Company (SKB). One purpose of the measurement campaigns was to acquire passive gamma spectra with high-purity germanium and lanthanum bromide scintillation detectors from Pressurized Water Reactor and Boiling Water Reactor spent fuel assemblies. The absolute 137Cs count rate and the 154Eu/137Cs, 134Cs/137Cs, 106Ru/137Cs, and 144Ce/137Cs isotopic ratios were extracted; these values were used to construct corresponding model functions (which describe each measured quantity’s behavior over various combinations of burnup, cooling time, and initial enrichment) and then were used to determine those same quantities in each measured spent fuel assembly. The results obtained in comparison with the operator declared values, as well as the methodology developed, are discussed in detail in the paper.
|
|
7. |
- Grogan, B., et al.
(author)
-
NDA Measurement Analysis of Spent Nuclear Fuel Assemblies at the SwedishClab Facility Using the INDEPTH Code
- 2016
-
Conference paper (other academic/artistic)abstract
- A project to research the application of non-destructive assay (NDA) to spent fuel assemblies is underwayamong a team comprised of the European Commission, DG Energy, Directorate Safeguards; the SwedishNuclear Fuel and Waste Management Company; Uppsala University; and US national laboratories (LosAlamos National Laboratory, Lawrence Livermore National Laboratory, and Oak Ride NationalLaboratory). The research goals of this project combine safeguards goals (detection of missing/substitutedfuel pins and verification of operator declarations) and non-safeguards goals (estimation of decay heat andreactivity of each assembly). The final objective of this project is to quantify the capability of severalintegrated NDA instruments being developed to meet the aforementioned safeguards and non-safeguardsgoals using combined signatures of neutron, gamma-ray, and decay heat.In support of these goals, passive gamma and neutron measurements were made on 50 spent fuelassemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel (Clab) using high-purity germanium and Fork detectors. The Oak Ridge National Laboratory (ORNL) Inverse DepletionTheory (INDEPTH) code was used to reconstruct the spent fuel parameters (initial enrichment, burnup,and cooling time) for each assembly. INDEPTH uses a gradient-based search technique—combined withthe ORIGEN code for forward depletion calculations—to find the spent fuel parameters that result inpassive gamma and neutron outputs that best match the measurements. The results of the INDEPTHcalculations are presented and compared to the operator declarations (trusted in this case) in order toassess how accurately these parameters can be determined using current passive gamma and neutronmeasurements. These results will provide a baseline which can be used to assess whether and by howmuch new safeguards instruments being developed for NDA measurements can improve the accuracy ofreconstructed fuel parameter values.
|
|
8. |
- Hellesen, Carl, 1980-, et al.
(author)
-
Nuclear Spent Fuel Parameter Determination using Multivariate Analysis of Fission Product Gamma Spectra
- 2017
-
In: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 110, s. 886-895
-
Journal article (peer-reviewed)abstract
- In this paper, we investigate the application of multivariate data analysis methods to the analysis of gamma spectroscopy measurements of spent nuclear fuel (SNF). Using a simulated irradiation and cooling of nuclear fuel over a wide range of cooling times (CT), total burnup at discharge (BU) and initial enrichments (IE) we investigate the possibilities of using a multivariate data analysis of the gamma ray emission signatures from the fuel to determine these fuel parameters. This is accomplished by training a multivariate analysis method on simulated data and then applying the method to simulated, but perturbed, data.We find that for SNF with CT less than about 20 years, a single gamma spectrum from a high resolution gamma spectrometer, such as a high-purity germanium spectrometer, allows for the determination of the above mentioned fuel parameters.Further, using measured gamma spectra from real SNF from Swedish pressurized light water reactors we were able to confirm the operator declared fuel parameters. In this case, a multivariate analysis trained on simulated data and applied to real data was used.
|
|
9. |
- Jacobsson, Staffan, 1970-, et al.
(author)
-
Outcomes of the JNT 1955 Phase I Viability Study of Gamma Emission Tomography for Spent Fuel Verification
- 2017
-
In: ESARDA Bulletin. - 1977-5296. ; :55, s. 10-28
-
Journal article (peer-reviewed)abstract
- The potential for gamma emission tomography (GET) to detect partial defects within a spent nuclear fuel assembly has been assessed within the IAEA Support Program project JNT 1955, phase I, which was completed and reported to the IAEA in October 2016. Two safeguards verification objectives were identified in the project; (1) independent determination of the number of active pins that are present in a measured assembly, in the absence of a priori information about the assembly; and (2) quantitative assessment of pin-by-pin properties, for example the activity of key isotopes or pin attributes such as cooling time and relative burnup, under the assumption that basic fuel parameters (e.g., assembly type and nominal fuel composition) are known. The efficacy of GET to meet these two verification objectives was evaluated across a range of fuel types, burnups and cooling times, while targeting a total interrogation time of less than 60 minutes.The evaluations were founded on a modelling and analysis framework applied to existing and emerging GET instrument designs. Monte Carlo models of different fuel types were used to produce simulated tomographer responses to large populations of "virtual" fuel assemblies. The simulated instrument response data were then processed using a variety of tomographic-reconstruction and image- processing methods, and scoring metrics were defined and used to evaluate the performance of the methods.This paper describes the analysis framework and metrics used to predict tomographer performance. It also presents the design of a "universal" GET (UGET) instrument intended to support the full range of verification scenarios envisioned by the IAEA. Finally, it gives examples of the expected partial-defect detection capabilities for some fuels and diversion scenarios, and it provides a comparison of predicted performance for the notional UGET design and an optimized variant of an existing IAEA instrument.
|
|
10. |
- Jacobsson Svärd, Staffan, 1970-, et al.
(author)
-
Tomographic determination of spent fuel assembly pin-wise burnup and cooling time for detection of anomalies
- 2015
-
Conference paper (other academic/artistic)abstract
- The IAEA has initiated Member States’ Support Program project JNT A 1955 to assess the partial defect detection capabilities of gamma emission tomography (GET) for spent nuclear fuel assembly verification. The GET technique is based on measurements of the gamma-ray flux distribution around a spent fuel assembly using dedicated, tomographic equipment and subsequent reconstruction of the internal source distribution using tomographic algorithms applied on the recorded data. One of the verification objectives identified for the project is the quantitative measurement of pin-by-pin properties, e.g. burnup and/or cooling time, for the detection of anomalies and/or verification of operator-declared data. For this objective, reconstruction algorithms that return quantitative, isotopic pin-by-pin data are applied.Previously, GET measurements performed on commercial nuclear fuel assemblies in Sweden have proven capable of determining the relative pin-by-pin power distribution with high precision in BWR fuel with short cooling time, based on the measured distribution of the gamma-ray emitting fission product 140Ba/La in the fuel. In the current project, the capabilities of GET to determine additional pin-wise fuel parameters in additional fuel types are being assessed. The evaluations are based on Monte Carlo simulations of the emission of gamma-rays from the fuel and their detection in a tomographic measurement device.This paper describes the algorithms used for reconstructing quantitative pin-wise data and the results that are anticipated with this technique. It is argued that detailed modelling of the gamma-ray attenuation through the highly inhomogeneous mix of strongly-attenuating fuel rods and less-attenuating surrounding water (wet storage) or air (dry storage) is required to yield high precision in the reconstructed data. The burnup distribution assessment would be based on the recording of 662-keV gamma radiation from 137Cs, whereas the assessment of both burnup and cooling time simultaneously requires the GET measurement and pin-wise reconstruction of at least two isotopes, which puts constraints on the measurement equipment used.
|
|