1. |
- Kananizadeh, Negin, et al.
(author)
-
Deposition of titanium dioxide nanoparticles onto engineered rough surfaces with controlled heights and properties
- 2019
-
In: Colloids and Surfaces A. - : ELSEVIER SCIENCE BV. - 0927-7757 .- 1873-4359. ; 571, s. 125-133
-
Journal article (peer-reviewed)abstract
- Understanding the influence of surface roughness on the deposition of nanoparticles is important to a variety of environmental and industrial processes. In this work, slanted columnar thin films (SCTFs) were engineered to serve as an analogue for rough surfaces with controlled height and surface properties. The deposition of titanium dioxide nanoparticles (TiO(2)NPs) onto alumina-or silica-coated SCTFs (Al2O3-Si-SCTF, SiO2-Si-SCTF) with varying heights (50 nm, 100 nm, and 200 nm) was measured using a combined quartz crystal microbalance with dissipation monitoring (QCM-D) and generalized ellipsometry (GE) technique. No TiO2NP deposition was observed on flat, silica-coated QCM-D sensors or rough, 100 nm thick SiO2-Si-SCTF. TiO2NP deposition onto Al2O3-Si-SCTFs in ultra-pure water was significantly higher than on the flat alumina-coated QCM-D sensor, and deposition increased as the roughness height increased. The nanoparticle attachment was sensitive to the local flow field and the interaction energy between nanoparticles and the QCM-D sensor. At a higher ionic strength condition (100 mM NaCl), TiO2NP aggregates with varying sizes formed a rigid layer on top of SCTFs. For the first time, deposition of nanoparticles was measured as a function of roughness height, and the impact of roughness on the properties of the attached nanoparticle layers was revealed. This finding indicates that key parameters describing surface roughness should be explicitly included into models to accurately predict the transport of nanoparticles in the subsurface.
|
|
2. |
- Kananizadeh, Negin, et al.
(author)
-
Visualization of label-free titanium dioxide nanoparticle deposition on surfaces with nanoscale roughness
- 2019
-
In: ENVIRONMENTAL SCIENCE-NANO. - : ROYAL SOC CHEMISTRY. - 2051-8153 .- 2051-8161. ; 6:1, s. 248-260
-
Journal article (peer-reviewed)abstract
- Understanding the transport of engineered nanoparticles (ENPs) and their interaction with environmental surfaces is critical to predicting their fate and environmental implications. Here, we report an innovative technique to visualize and quantify the deposition of titanium dioxide nanoparticles (TiO2NP) on engineered surfaces with nanoscale roughness, i.e., slanted columnar thin films (SCTFs). The attachment of TiO2NP on the surface of SCTFs changed the optical property of SCTFs, which was detected using a generalized ellipsometry (GE)-based instrument, an anisotropy contrast optical microscope (ACOM). An anisotropic effective medium model was applied to quantitatively analyze ACOM images of SCTF surfaces, which provided the mass distribution of TiO2NP. The TiO2NP mass measured by ACOM was in good agreement with the known amount of TiO2NP mass dispersed by controlled piezoelectric plotting. The detection of a few picograms of nanoparticle mass by an individual pixel measuring 7 x 7-micrometer squared was demonstrated. Further, a glass microfluidic channel with SCTF embedded was developed. The areal mass density of attached TiO2NP on SCTF surfaces as they flow through the channel under various flow rates was quantitatively measured in situ. At the end of the experiment, the distribution of the attached TiO2NP on the SCTF surface was visualized. The averaged mass density estimated by integrating the distribution map was in close agreement with the estimation from dynamic measurements and between repeating experiments. The capability of this novel technique to sense, quantify and visualize the mass distribution of TiO2NP provides a valuable approach to investigate the behavior of nanoparticles at the interface of flow and rough surfaces.
|
|