| 1. |
- Ding Yuan, Chen, 1991, et al.
(author)
-
Impact of in situ NH3 pre-treatment of LPCVD SiN passivation on GaN HEMT performance
- 2022
-
In: Semiconductor Science and Technology. - : IOP Publishing. - 1361-6641 .- 0268-1242. ; 37:3
-
Journal article (peer-reviewed)abstract
- The impact on the performance of GaN high electron mobility transistors (HEMTs) of in situ ammonia (NH3) pre-treatment prior to the deposition of silicon nitride (SiN) passivation with low-pressure chemical vapor deposition (LPCVD ) is investigated. Three different NH3 pre-treatment durations (0, 3, and 10 min) were compared in terms of interface properties and device performance. A reduction of oxygen (O) at the interface between SiN and epi-structure is detected by scanning transmission electron microscopy (STEM )-electron energy loss spectroscopy (EELS) measurements in the sample subjected to 10 min of pre-treatment. The samples subjected to NH3 pre-treatment show a reduced surface-related current dispersion of 9% (compared to 16% for the untreated sample), which is attributed to the reduction of O at the SiN/epi interface. Furthermore, NH3 pre-treatment for 10 min significantly improves the current dispersion uniformity from 14.5% to 1.9%. The reduced trapping effects result in a high output power of 3.4 W mm(-1) at 3 GHz (compared to 2.6 W mm(-1) for the untreated sample). These results demonstrate that the in situ NH3 pre-treatment before LPCVD of SiN passivation is critical and can effectively improves the large-signal microwave performance of GaN HEMTs.
|
|
| 2. |
- Gogova, Daniela, et al.
(author)
-
Epitaxial growth of β -Ga 2 O 3 by hot-wall MOCVD
- 2022
-
In: AIP Advances. - : AIP Publishing. - 2158-3226. ; 12:5, s. 055022-055022
-
Journal article (peer-reviewed)abstract
- The hot-wall metalorganic chemical vapor deposition (MOCVD) concept, previously shown to enable superior material quality and highperformance devices based on wide bandgap semiconductors, such as Ga(Al)N and SiC, has been applied to the epitaxial growth ofβ-Ga2O3. Epitaxial β-Ga2O3 layers at high growth rates (above 1 μm/h), at low reagent flows, and at reduced growth temperatures(740 ○C) are demonstrated. A high crystalline quality epitaxial material on a c-plane sapphire substrate is attained as corroborated by a combination of x-ray diffraction, high-resolution scanning transmission electron microscopy, and spectroscopic ellipsometry measurements. Thehot-wall MOCVD process is transferred to homoepitaxy, and single-crystalline homoepitaxial β-Ga2O3 layers are demonstrated with a 201 ¯rocking curve width of 118 arc sec, which is comparable to those of the edge-defined film-fed grown (201) ¯ β-Ga2O3 substrates, indicative ofsimilar dislocation densities for epilayers and substrates. Hence, hot-wall MOCVD is proposed as a prospective growth method to be furtherexplored for the fabrication of β-Ga2O3
|
|
| 3. |
- Gogova, Daniela, 1967-, et al.
(author)
-
Epitaxial growth of β-Ga2O3 by hot-wall MOCVD
- 2022
-
In: AIP Advances. - : AIP Publishing. - 2158-3226. ; 12:5
-
Journal article (peer-reviewed)abstract
- The hot-wall metalorganic chemical vapor deposition (MOCVD) concept, previously shown to enable superior material quality and high performance devices based on wide bandgap semiconductors, such as Ga(Al)N and SiC, has been applied to the epitaxial growth of beta-Ga2O3. Epitaxial beta-Ga2O3 layers at high growth rates (above 1 mu m/h), at low reagent flows, and at reduced growth temperatures (740 degrees C) are demonstrated. A high crystalline quality epitaxial material on a c-plane sapphire substrate is attained as corroborated by a combination of x-ray diffraction, high-resolution scanning transmission electron microscopy, and spectroscopic ellipsometry measurements. The hot-wall MOCVD process is transferred to homoepitaxy, and single-crystalline homoepitaxial beta-Ga2O3 layers are demonstrated with a 201 rocking curve width of 118 arc sec, which is comparable to those of the edge-defined film-fed grown (201) beta-Ga2O3 substrates, indicative of similar dislocation densities for epilayers and substrates. Hence, hot-wall MOCVD is proposed as a prospective growth method to be further explored for the fabrication of beta-Ga2O3.
|
|
