1. |
- Klionsky, Daniel J., et al.
(author)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
In: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Research review (peer-reviewed)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
2. |
- Li, Li, et al.
(author)
-
A study on motor-scooter accidents in China and Germany
- 2013
-
In: Proceedings - 2013 5th Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2013. - 9780769549323 ; , s. 110-113
-
Conference paper (peer-reviewed)abstract
- The vehicle traffic accidents have been widely studied not only in the motorized countries but also in the motorizing countries, while in-depth study on motor-scooter accidents has not been adequately investigated. In this research the motor-scooter accident data from IVAC in Changsha of China were collected from in depth accident investigation, at the same time the accidents samples from GIDAS in Hannover Medical University from 2004 to 2010 were also picked out to study the injury mechanism on motor-scooter riders. By utilizing the statistical analysis and accident reconstruction method, the injury location and injury severity of the scooter riders are investigated, furthermore the collision type, collision speed on scooter to car accidents, impact areas on helmets for scooter riders, injury risk as a function of car collision speed are investigated. The research results can provide foundation and reference for the establishment on injury protection measures for scooter riders.
|
|
3. |
- Amer, Wael A., et al.
(author)
-
Liquid-crystalline azobenzene-containing ferrocene-based polymers : study on synthesis and properties of main-chain ferrocene-based polyesters with azobenzene in the side chain
- 2013
-
In: Polymers for Advanced Technologies. - : Wiley. - 1042-7147 .- 1099-1581. ; 24:2, s. 181-190
-
Journal article (peer-reviewed)abstract
- Ferrocene-based polymers are characterized by their electrochemical activity, good redox properties, thermal, photochemical stability, and liquid crystallinity, and thus they have various applications in different fields. A comprehensive investigation on the synthesis and properties of three novel main-chain ferrocene-based polyesters with azobenzene in the side chain (MFPAS) was carried out. The main-chain ferrocene-based polyester, poly(N-phenyldiethanolamine 1,1'-ferrocene dicarboxylate (PPFD), was synthesized via the solution polycondensation reaction of 1,1'-ferrocenedicarbonyl chloride with phenyldiethanolamine (PDE). The novel MFPAS were synthesized via the post-polymerization azo-coupling reaction of PPFD with three different 4-substituted anilines including 4-nitroaniline, 4-aminobenzoic acid, and 4-aminobenzonitrile to produce 4-nitrophenylazo-functionalized-PPFD (PPFD-NT), 4-carboxyphenylazo-functionalized-PPFD (PPFD-CA), and 4-cyanophenylazo-functionalized-PPFD (PPFD-CN), respectively. All the synthesized polymers were characterized by 1H NMR spectroscopy, Fourier transform infrared spectroscopy, and UVvisible spectroscopy. In addition, powder X-ray diffraction patterns were measured for the synthesized polymers. The photoisomerization of the MFPAS was studied. The thermal properties of the MFPAS were studied using thermogravimetric analysis and differential scanning calorimetry. PPFD-CA and PPFD-CN were found to be more thermally stable than PPFD-NT. Finally, the liquid-crystalline properties of PPFD and the MFPAS were examined using polarized optical microscope. It was found that all the polymers possessed nematic phases and exhibited textures with schlieren disclinations.
|
|
4. |
- Ding, Huaiyi, et al.
(author)
-
Maximizing Integrated Optical and Electrical Properties of a Single ZnO Nanowire through Native Interfacial Doping
- 2014
-
In: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 26:19, s. 3035-3041
-
Journal article (peer-reviewed)abstract
- A native interfacial doping layer introduced in core-shell type ZnO nanowires by a simple vapor phase re-growth procedure endows the produced nanowires with both excellent electrical and optical performances compared to conventional homogeneous ZnO nanowires. The unique Zn-rich interfacial structure in the core-shell nanowires plays a crucial role in the outstanding performances.
|
|
5. |
- Luo, Jun, et al.
(author)
-
Effects of carbon pre-silicidation implant into Si substrate on NiSi
- 2014
-
In: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 120, s. 178-181
-
Journal article (peer-reviewed)abstract
- In this work, the effects of carbon pre-silicidation implant into Si(1 0 0) substrate on NiSi were investigated. NiSi films with carbon pre-silicidation implant to different doses were characterized by means of sheet resistance measurements, X-ray diffraction, scanning electron microscopy (SEM), planar view transmission electron microscopy (TEM) and second ion mass spectroscopy (SIMS). The presence of C is found to indeed significantly improve the thermal stability of NiSi as well as tends to change the preferred orientations of polycrystalline NiSi. The homogeneously distributed C at NiSi grain boundaries and C peak at NiSi/Si interface is ascribed to the improved thermal stability of NiSi. More importantly, the dose of carbon pre-silicidation implant also plays a key role in the formation of NiSi, which is suggested not to exceed a critical value about 5 x 10(15) cm(-2) in practical application in accordance with the results achieved in this work. (C) 2013 Elsevier B.V. All rights reserved.
|
|
6. |
|
|
7. |
- Luo, Jun, et al.
(author)
-
Thermal Stability and Dopant Segregation for Schottky Diodes With Ultrathin Epitaxial NiSi(2-y)
- 2011
-
In: IEEE Electron Device Letters. - : Institute of Electrical and Electronics Engineers (IEEE). - 0741-3106 .- 1558-0563. ; 32:8, s. 1029-1031
-
Journal article (peer-reviewed)abstract
- The Schottky barrier height (SBH) of an ultrathin epitaxial NiSi(2-y) film grown on Si(100) is modified significantly by means of dopant segregation (DS). The DS process begins with the NiSi(2-y) formation and is followed by dopant implantation and drive-in annealing. The rapid lattice restoration and superior morphological stability upon heat treatment up to 800 degrees C allow the epitaxial NiSi(2-y) film to take full advantage of the DS process. For drive-in annealing below 750 degrees C, the effective SBH is altered to similar to 0.9-1 eV for both electrons and holes by B-DS and As-DS, respectively, without deteriorating the integrity of the NiSi(2-y) film.
|
|
8. |
|
|
9. |
- Luo, Jun, et al.
(author)
-
Variation of Schottky barrier height induced by dopant segregation monitored by contact resistivity measurements
- 2014
-
In: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 120, s. 174-177
-
Journal article (peer-reviewed)abstract
- Change of contact resistivity (rho(c)) is monitored for evaluation of Schottky barrier height (SBH) variation induced by dopant segregation (DS). This method is particularly advantageous for metal-semiconductor contacts of small SBH, as it neither requires low-temperature measurement needed in current-voltage characterization of Schottky diodes nor is affected by reverse leakage current often troubling capacitance-voltage characterization. With PtSi contact to both n- and p-type diffusion regions, and the use of opposite or alike dopants implant into pre-formed PtSi films followed by drive-in anneal at different temperatures to induce DS at PtSi/Si interface, the formation of interfacial dipole is confirmed as the responsible cause for modification of effective SBHs thus the increase or decrease of rho(c). A tentative explanation for the change of contact resistivity based on interfacial dipole theory is provided in this work. Influences and interplay of interfacial dipole and space charge on effective SBH are also discussed. (C) 2013 Elsevier B.V. All rights reserved.
|
|
10. |
- Minami, S. Sakura, et al.
(author)
-
Progranulin protects against amyloid beta deposition and toxicity in Alzheimer's disease mouse models
- 2014
-
In: Nature Medicine. - : Springer Science and Business Media LLC. - 1078-8956 .- 1546-170X. ; 20:10, s. 1157-1164
-
Journal article (peer-reviewed)abstract
- Haploinsufficiency of the progranulin (PGRN) gene (GRN) causes familial frontotemporal lobar degeneration (FTLD) and modulates an innate immune response in humans and in mouse models. GRN polymorphism may be linked to late-onset Alzheimer's disease (AD). However, the role of PGRN in AD pathogenesis is unknown. Here we show that PGRN inhibits amyloid beta (A beta) deposition. Selectively reducing microglial expression of PGRN in AD mouse models impaired phagocytosis, increased plaque load threefold and exacerbated cognitive deficits. Lentivirus-mediated PGRN overexpression lowered plaque load in AD mice with aggressive amyloid plaque pathology. A beta plaque load correlated negatively with levels of hippocampal PGRN, showing the dose-dependent inhibitory effects of PGRN on plaque deposition. PGRN also protected against A beta toxicity. Lentivirus-mediated PGRN overexpression prevented spatial memory deficits and hippocampal neuronal loss in AD mice. The protective effects of PGRN against A beta deposition and toxicity have important therapeutic implications. We propose enhancing PGRN as a potential treatment for PGRN-deficient FTLD and AD.
|
|