| 1. |
- Ablikim, M., et al.
(author)
-
Measurements of (XcJ)-> K+K-K+K- decays
- 2006
-
In: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 642:3, s. 197-202
-
Journal article (peer-reviewed)abstract
- Using 14M psi(2S) events taken with the BESII detector, chi(cJ) -> 2(K+K-) decays are studied. For the four-kaon final state, the branching fractions are B(chi(c0,1,2) ->.2(K+K-)) = (3.48 +/- 0.23 +/- 0.47) x 10(-3), (0.70 +/- 0.13 +/- 0.10) x 10(-3), and (2.17 +/- 0.20 +/- 0.31) x 10(-3). For the phi K+K- final state, the branching fractions, which are measured for the first time, are B(chi(c0,1,2) -> phi K+K-) = (1.03 +/- 0.22 +/- 0.15) x 10(-3), (0.46 +/- 0.16 +/- 0.06) x 10(-3), and (1.67 +/- 0.26 +/- 0.24) x 10(-4). For the phi phi final state, B(chi(c0,2) -> phi phi) = (0.94 +/- 0.21 +/- 0.13) x 10(-3) and (1.70 +/- 0.30 +/- 0.25) x 10(-3).
|
|
| 2. |
- Schael, S, et al.
(author)
-
Precision electroweak measurements on the Z resonance
- 2006
-
In: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Research review (peer-reviewed)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Abazov, V. M., et al.
(author)
-
The upgraded DO detector
- 2006
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 565:2, s. 463-537
-
Journal article (peer-reviewed)abstract
- The DO experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider between 1992 and 1996. Since then, the detector has been upgraded to take advantage of improvements to the Tevatron and to enhance its physics capabilities. We describe the new elements of the detector, including the silicon microstrip tracker, central fiber tracker, solenoidal magnet, preshower detectors, forward muon detector, and forward proton detector. The uranium/liquid -argon calorimeters and central muon detector, remaining from Run 1, are discussed briefly. We also present the associated electronics, triggering, and data acquisition systems, along with the design and implementation of software specific to DO.
|
|
| 4. |
- Duan, Ming-Rui, et al.
(author)
-
DNA binding mechanism revealed by high resolution crystal structure of Arabidopsis thaliana WRKY1 protein
- 2007
-
In: Nucleic Acids Research. - : Oxford University Press (OUP). - 1362-4962 .- 0305-1048. ; 35:4, s. 54-1145
-
Journal article (peer-reviewed)abstract
- WRKY proteins, defined by the conserved WRKYGQK sequence, are comprised of a large superfamily of transcription factors identified specifically from the plant kingdom. This superfamily plays important roles in plant disease resistance, abiotic stress, senescence as well as in some developmental processes. In this study, the Arabidopsis WRKY1 was shown to be involved in the salicylic acid signaling pathway and partially dependent on NPR1; a C-terminal domain of WRKY1, AtWRKY1-C, was constructed for structural studies. Previous investigations showed that DNA binding of the WRKY proteins was localized at the WRKY domains and these domains may define novel zinc-binding motifs. The crystal structure of the AtWRKY1-C determined at 1.6 A resolution has revealed that this domain is composed of a globular structure with five beta strands, forming an antiparallel beta-sheet. A novel zinc-binding site is situated at one end of the beta-sheet, between strands beta4 and beta5. Based on this high-resolution crystal structure and site-directed mutagenesis, we have defined and confirmed that the DNA-binding residues of AtWRKY1-C are located at beta2 and beta3 strands. These results provided us with structural information to understand the mechanism of transcriptional control and signal transduction events of the WRKY proteins.
|
|
| 5. |
- Aamodt, K., et al.
(author)
-
The ALICE experiment at the CERN LHC
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Research review (peer-reviewed)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 6. |
- Chen, K., et al.
(author)
-
High permittivity in zr doped NiO ceramics
- 2007
-
In: Journal of Applied Physics. - : American Institute of Physics (AIP). - 0021-8979 .- 1089-7550. ; 102:3, s. 034103-
-
Journal article (peer-reviewed)abstract
- We report on measurements of the dielectric permittivity of NiO-based ceramics doped with Zr (ZNO). Samples were prepared by the traditional solid-state reaction method. The concentration of Zr has an effect on the dielectric properties of ZNO ceramics. High permittivity values (similar to 10(4)) were observed which remain almost constant from 200 K to 350 K at low frequencies. The high-dielectric-constant response of the ZNO ceramics is attributed mainly to a grain boundary (internal) barrier layer capacitance. (c) 2007 American Institute of Physics.
|
|
| 7. |
- Clark, Andrew G., et al.
(author)
-
Evolution of genes and genomes on the Drosophila phylogeny
- 2007
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 450:7167, s. 203-218
-
Journal article (peer-reviewed)abstract
- Comparative analysis of multiple genomes in a phylogenetic framework dramatically improves the precision and sensitivity of evolutionary inference, producing more robust results than single-genome analyses can provide. The genomes of 12 Drosophila species, ten of which are presented here for the first time (sechellia, simulans, yakuba, erecta, ananassae, persimilis, willistoni, mojavensis, virilis and grimshawi), illustrate how rates and patterns of sequence divergence across taxa can illuminate evolutionary processes on a genomic scale. These genome sequences augment the formidable genetic tools that have made Drosophila melanogaster a pre-eminent model for animal genetics, and will further catalyse fundamental research on mechanisms of development, cell biology, genetics, disease, neurobiology, behaviour, physiology and evolution. Despite remarkable similarities among these Drosophila species, we identified many putatively non-neutral changes in protein-coding genes, non-coding RNA genes, and cis-regulatory regions. These may prove to underlie differences in the ecology and behaviour of these diverse species.
|
|
| 8. |
- Li, Xin, et al.
(author)
-
Re-writable multi-domain liquid crystal alignment layers through laser-induced micropatterning
- 2006
-
In: Japanese Journal of Applied Physics. - 0021-4922 .- 1347-4065. ; 45:20-23, s. L591-L594
-
Journal article (peer-reviewed)abstract
- We report a method for the preparation of multi-domain liquid crystal (LC) alignment layers on polyimide surfaces with laser-induced periodic surface structures. Atomic force microscopy confirmed that the laser-induced microstructures could be easily erased and re-constructed by repeated laser exposure. The microstructures demonstrated excellent abilities to align LCs in a multi-domain way. The intricate micropatterning of LCs with high resolution was obtained. The opto-electric properties of the LC cells were also determined. In addition, the method is available to a wide range of polymeric substrates, including flexible ones such as poly(ethylene terephthalate).
|
|
| 9. |
- Li, Z., et al.
(author)
-
SoC architecture with a switch bridge for wireless ECG data acquisition
- 2009
-
In: 2009 1st International Conference on Information Science and Engineering, ICISE 2009. - 9780769538877 ; , s. 3701-3704
-
Conference paper (peer-reviewed)abstract
- NoC architecture with a switch bridge is designed for mixed signal SoC of the ETB (ECG T on body) applied in home healthcare wireless network. The SoC including multi CPU systems can be divided into different parts with data process function. Therefore each part of the system can work independently without influence each other. With the discussion of the performances of ETB, the switch bridge is a suitable NoC (network on chip) technology for reducing the dies size and power consumption. The switch bridge designed in this paper connects two CPU systems and two others digital circuitry components together. To the CPU systems, common digital circuitry is a part of the CPU system with the bridge. The architecture and logic function of the switch bridge is analyzed in detail and simulated. The simulation results demonstrate that the connection bridge can not only supply the connection of two CPU and two common modules, include display module and RAM, but also increased the running speed and system performance.
|
|
| 10. |
- Liu, Ming, et al.
(author)
-
ATCA-based Computation Platform for Data Acquisition and Triggering in Particle Physics Experiments
- 2008
-
In: 2008 INTERNATIONAL CONFERENCE ON FIELD PROGRAMMABLE AND LOGIC APPLICATIONS, VOLS 1 AND 2. ; , s. 287-292
-
Conference paper (peer-reviewed)abstract
- An ATCA-based computation platform for data acquisition and trigger applications in nuclear and particle physics experiments has been developed. Each Compute Node (CN) which appears as a Field Replaceable Unit (FRU) in an ATCA shelf, features 5 Xilinx Virtex-4 FX60 FPGAs and up to 10 GBytes DDR2 memory. Connectivity is provided with 8 optical links and 5 Gigabit Ethernet ports, which are mounted on each board to receive data from detectors and forward results to outer shelves or PC farms with attached mass storage. Fast point-to-point on-board interconnections between FPGAs as well as the full-mesh shelf backplane provide flexibility and high bandwidth to partition algorithms and correlate results among them. The system represents a highly reconfigurable and scalable solution for multiple applications.
|
|
