1. |
- Ma, Ming-Guo, et al.
(author)
-
Fabrication and characterization of Ag/calcium silicate core-shell nanocomposites
- 2011
-
In: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 65:19-20, s. 3069-3071
-
Journal article (peer-reviewed)abstract
- The Ag/calcium silicate nanocomposite with core-shell nanostructure has been successfully synthesized using Ag solution, Ca(NO(3))(2)center dot 4H(2)O and Na(2)SiO(3)center dot 9H(2)O in ethanol/water mixed solvents at room temperature for 48 h. Ag solution was previously prepared by microwave-assisted method in ethylene glycol (EG) at 150 degrees C for 10 min. The nanocomposites consisted of Ag core and an amorphous calcium silicate shell. The XRD and EDS results confirmed that the product was the Ag/calcium silicate nanocomposite. The TEM micrographs indicated that the Ag/calcium silicate nanocomposite was core-shell nanoparticles. The effects of Ca (NO(3))(2)center dot 4H(2)O and Na(2)SiO(3)center dot 9H(2)O concentration on the shells of Ag/calcium silicate nanocomposite were investigated. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and energy-dispersive X-ray spectra (EDS). This method is simple, fast and may be extended to the synthesis of the other kinds of core-shell nanocomposites.
|
|
2. |
- Ma, Ming-Guo, et al.
(author)
-
Microwave-assisted synthesis of hierarchical Bi2O3 spheres assembled from nanosheets with pore structure
- 2010
-
In: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 64:13, s. 1524-1527
-
Journal article (peer-reviewed)abstract
- Hierarchical Bi2O3 spheres assembled from nanosheets with nanopore structure have been successfully synthesized by thermal decomposition of the precursor at 400 degrees C for 3 h in air, which was prepared using Bi (NO3)(3)center dot 5H(2)O and poly(vinylpyrrolidone) (PVP) by a microwave-assisted heating method in ethylene glycol (EG) at 150 degrees C for 10 min The morphology of Bi2O3 is similar to that of the precursor The products were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), field-emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TG) and differential scanning calorimetric analysis (DSC) XRD pattern showed that the product had a high degree of crystallinity. FE-SEM micrograph indicated that hierarchical Bi2O3 spheres had sizes around 10 μm.
|
|
3. |
- Ma, Ming-Guo, et al.
(author)
-
Synthesis and characterization of the tellurium/calcium silicate nanocomposite
- 2011
-
In: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 65:3, s. 424-426
-
Journal article (peer-reviewed)abstract
- A novel tellurium/calcium silicate nanocomposite with tellurium nanorods homogeneously dispersed in the calcium silicate matrix has been successfully synthesized using corresponding tellurium nanorods, Ca(NO3)(2)center dot 4H(2)O, and Na2SiO3 center dot 9H(2)O in ethanol/water mixed solvents at room temperature for 48 h. The new material consists of a single crystalline Te core and an amorphous calcium silicate shell. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and energy-dispersive X-ray spectroscopy (EDS). The method is simple and does not need any surfactant or template or base. Cytotoxicity experiments indicated that the tellurium/calcium silicate nanocomposites with a low concentration had good biocompatibility. This nanocomposite is a very promising candidate for the application as bioactive materials.
|
|
4. |
- Duan, Chen, et al.
(author)
-
Comparative analysis of gene expression profiles between primary knee osteoarthritis and an osteoarthritis endemic to Northwestern China, Kashin-Beck disease.
- 2010
-
In: Arthritis and Rheumatism. - : John Wiley & Sons. - 0004-3591 .- 1529-0131. ; 62:3, s. 771-780
-
Journal article (peer-reviewed)abstract
- OBJECTIVE: To investigate the differences in gene expression profiles of adult articular cartilage from patients with Kashin-Beck disease (KBD) versus those with primary knee osteoarthritis (OA).METHODS: The messenger RNA expression profiles of articular cartilage from patients with KBD, diagnosed according to the clinical criteria for KBD in China, were compared with those of cartilage from patients with OA, diagnosed according to the Western Ontario and McMaster Universities OA Index. Total RNA was isolated separately from 4 pairs of the KBD and OA cartilage samples, and the expression profiles were evaluated by Agilent 4x44k Whole Human Genome density oligonucleotide microarray analysis. The microarray data for selected transcripts were confirmed by quantitative real-time reverse transcription-polymerase chain reaction (RT-PCR) amplification.RESULTS: For 1.2 x 10(4) transcripts, corresponding to 58.4% of the expressed transcripts, 2-fold changes in differential expression were revealed. Expression levels higher in KBD than in OA samples were observed in a mean + or - SD 6,439 + or - 1,041 (14.6 + or - 2.4%) of the transcripts, and expression levels were lower in KBD than in OA samples in 6,147 + or - 1,222 (14.2 + or - 2.8%) of the transcripts. After application of the selection criteria, 1.85% of the differentially expressed genes (P < 0.001 between groups) were detected. These included 233 genes, of which 195 (0.4%) were expressed at higher levels and 38 (0.08%) were expressed at lower levels in KBD than in OA cartilage. Comparisons of the quantitative RT-PCR data supported the validity of our microarray data.CONCLUSION: Differences between KBD and OA cartilage exhibited a similar pattern among all 4 of the pairs examined, indicating the presence of disease mechanisms, mainly chondrocyte matrix metabolism, cartilage degeneration, and apoptosis induction pathways, which contribute to cartilage destruction in KBD.
|
|
5. |
- Hu, Jing, et al.
(author)
-
Hydrothermal preparation of boehmite-doped AgCl nanocubes and their characterization
- 2011
-
In: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 65:11, s. 1531-1534
-
Journal article (peer-reviewed)abstract
- A simple hydrothermal route to the preparation of the boehmite-doped AgCl nanocubes using AgNO3,AlCl3 center dot 6H(2)O and NaOH at 200 degrees C for 24 h is reported. The products were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), UV-vis, thermogravimetric analysis (TGA), and differential thermal analysis (DTA). FE-SEM and TEM micrographs showed that the obtained boehmite-doped AgCl had nanocube-like morphology. The influence of heating temperature on the phase, microstructure, morphology, and thermal stability of the products were also investigated. UV-visible results indicated that the absorption edge moved to higher wavelength with the increasing heating temperature. These materials would be a promising material for photocatalyst applications.
|
|
6. |
- Jia, Ning, et al.
(author)
-
Hydrothermal fabrication, characterization, and biological activity of cellulose/CaCO3 bionanocomposites
- 2012
-
In: Carbohydrate Polymers. - : Elsevier BV. - 0144-8617 .- 1879-1344. ; 88:1, s. 179-184
-
Journal article (peer-reviewed)abstract
- Bionanocomposites with the combination of natural polymers and inorganic nanoparticles may induce unique properties and exhibit promising functions for different applications. Herein, we report a hydrothermal route to the preparation of cellulose/CaCO3 bionanocomposites using the cellulose solution. Ca(NO3)(2)center dot 4H(2)O and Na2SiO3 center dot 9H(2)O. The cellulose solution was previously prepared by the dissolution of microcrystalline cellulose in NaOH-urea aqueous solution. The urea also acts as the CO32- source for the synthesis of CaCO3. The influences of several reaction parameters, such as the heating time, the heating temperature, and the types of additives on the products were investigated by X-ray powder diffraction, Fourier transform infrared spectrometry, scanning electron microscopy, thermogravimetric analysis, and differential thermal analysis. The experimental results demonstrated that the hydrothermal conditions had an effect on the morphology of the bionanocomposites. Cytotoxicity experiments indicated that the cellulose/CaCO3 bionanocomposites had good biocompatibility, so that the bionanocomposites could be ideal candidate for practical biomedical applications.
|
|
7. |
- Jia, Ning, et al.
(author)
-
Hydrothermal Synthesis and Characterization of Cellulose-Carbonated Hydroxyapatite Nanocomposites in NaOH-Urea Aqueous Solution
- 2010
-
In: Science of Advanced Materials. - : American Scientific Publishers. - 1947-2935 .- 1947-2943. ; 2:2, s. 210-214
-
Journal article (peer-reviewed)abstract
- Cellulose-carbonated hydroxyapatite (CHA) nanocomposites with CHA nanostructures dispersed in the cellulose matrix have been successfully synthesized using microcrystalline cellulose, CaCl2, and NaH2PO4 in NaOH-urea aqueous solution by hydrothermal method. The cellulose solution was previously prepared by the dissolution of microcrystalline cellulose in NaOH-urea aqueous solution. The effects of the hydrothermal heating time, the heating temperature, and cellulose concentration on the products were investigated. The XRD and FTIR results indicated that the obtained products were the cellulose CHA nanocomposites. The SEM micrographs showed the CHA particles were dispersed in the cellulose matrix. The TGA and DTA indicated the cellulose content in the cellulose-CHA nanocomposites decreased with the decreasing raw cellulose. The size of CHA in nanocomposites decreased with the increasing preparation temperature. The products were characterized by X-ray powder diffraction (XRD), thermogravimetric analysis (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FTIR), and scanning electron microscopy (SEM). This type of cellulose/CHA nanocomposites would be expected to be useful as novel biomedical material.
|
|
8. |
- Jia, Ning, et al.
(author)
-
Microwave-assisted synthesis and characterization of cellulose-carbonated hydroxyapatite nanocomposites in NaOH-urea aqueous solution
- 2010
-
In: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 64:20, s. 2223-2225
-
Journal article (peer-reviewed)abstract
- We report the microwave-assisted synthesis of the cellulose-carbonated hydroxyapatite (CHA) nanocomposites with CHA nanostructures dispersed in the cellulose matrix by using the cellulose solution, CaCl2, and NaH2PO4. The cellulose solution was previously prepared by the dissolution of microcrystalline cellulose in NaOH-urea aqueous solution. The influences of the heating time and cellulose concentration on the products were also investigated. The X-ray powder diffraction (XRD) and Fourier transform infrared spectrometry (FT-IR) results indicated that the obtained products were the cellulose-CHA nanocomposites. The scanning electron microscopy (SEM) micrographs showed the CHA nanostructures were dispersed in the cellulose matrix. The thermal stability of the cellulose-CHA nanocomposites in air was investigated using thermogravimetric analysis (TGA) and differential thermal analysis (DTA). This method is simple, fast, low-cost and suitable for large-scale production of cellulose-based nanocomposites.
|
|
9. |
- Jia, Ning, et al.
(author)
-
Synthesis and characterization of cellulose-silica composite fiber in ethanol/water mixed solvents
- 2011
-
In: BioResources. - 1930-2126. ; 6:2, s. 1186-1195
-
Journal article (peer-reviewed)abstract
- Cellulose-silica composite fiber samples have been successfully synthesized using cellulose solution, tetraethoxysilane, and NH3 center dot H2O in ethanol/water mixed solvents at room temperature for 24 h. The cellulose solution was previously prepared by the dissolution of microcrystalline cellulose in a solvent mixture of N,N-dimethylacetamide (DMAc)/lithium chloride (LiCl). The effect of the tetraethoxysilane concentration on the product was investigated. The products were characterized by X-ray powder diffraction (XRD), thermogravimetric analysis (TG), differential scanning calorimetric analysis (DSC), scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FT-IR), energy-dispersive X-ray spectrum (EDS), and cross polarization magic angle spinning (CP/MAS) solid state C-13-NMR. The morphology of the cellulose-silica composite fiber was investigated by SEM, while their composition was established from EDS measurements combined with the results of FT-IR spectral analysis and XRD patterns. The XRD, FT-IR and EDS results indicated that the obtained product was cellulose-silica composite fiber. The SEM micrographs showed that the silica particles were homogeneously dispersed in the cellulose fiber. The CP/MAS solid state C-13-NMR results indicated that the silica concentration had an influence on the crystallinity of the cellulose. This method is simple for preparation of cellulose-based composites.
|
|
10. |
- Li, Jie, et al.
(author)
-
Regional variations of vasomotion to G-protein coupled receptor agonists following heat stress in rats
- 2010
-
In: Journal of Pharmacy and Pharmacology. - 0022-3573. ; 62:3, s. 315-322
-
Journal article (peer-reviewed)abstract
- Objectives This study was designed to compare vascular contractile and relaxing responses to G-protein coupled receptor agonists among the different regions of arteries following heat stress in rats. Methods Heat exposure was performed by increasing the internal temperature of the rats to 42 degrees C for 15 min. After heat stress for 48 h, a rnyograph system was used to monitor the contractile responses in rat renal, femoral and mesenteric arteries to agonists of endothelin type B (ETB) receptor, endothelin type A (ETA) receptor, serotonin receptor and alpha-adrenoceptor, respectively. In addition, calcitonin gene-related peptide (CGRP)-induced vasodilation was studied. Key findings The results showed that heat stress induced decreased contractions mediated by alpha-adrenoceptors and serotonin receptors (at lower concentration), while it increased contraction mediated by endothelin ETB receptors and enhanced relaxation mediated by CGRP receptors in the renal artery. Heat stress increased contractions mediated by endothelin ETB receptors, endothelin ETA receptors and alpha-adrenoceptors in the femoral artery. In the mesenteric artery, heat stress increased contractions mediated by endothelin ETB and serotonin receptors and relaxation mediated by CGRP receptors. Conclusions The vasomotor responses to the G-protein coupled receptor agonists with altered vascular contractions and relaxations were different in rat renal, femoral and mesenteric arteries after heat stress. This might have contributed to the redistribution of blood flow and aids understanding of the preconditioning phenomenon.
|
|