1. |
|
|
2. |
- Östmark, Emma, et al.
(author)
-
Dendritic Structures Based on Bis(hydroxymethyl)propionic Acid as Platforms for Surface Reactions
- 2005
-
In: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 21:10, s. 4512-4519
-
Journal article (peer-reviewed)abstract
- In this paper we present results related to the self-assembly of different generations of disulfide-cored 2,2-bis(hydroxymethyl)propionic acid-based dendritic structures onto gold surfaces. These molecular architectures, ranging from generation 1 to generation 3, contain removable acetonide protecting groups at their periphery that are accessible for hydrolysis with subsequent formation of OH-terminated surface-attached dendrons. The deprotection has been investigated in detail as a versatile approach to accomplish reactive surface platforms. A special focus has been devoted to the comparison of the properties of the layers formed by hydrolysis of the acetonide moieties directly on the surface and in solution, prior to the layer formation.
|
|
3. |
|
|
4. |
|
|
5. |
|
|
6. |
- Aulin, Christian, 1980-, et al.
(author)
-
Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces
- 2008
-
In: Journal of Colloid and Interface Science. - : Elsevier BV. - 0021-9797 .- 1095-7103. ; 317:2, s. 556-567
-
Journal article (peer-reviewed)abstract
- The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (Ξe > 90 °) by castor oil.
|
|
7. |
- Bellier, Q., et al.
(author)
-
Design of near-infrared dyes for nonlinear optics : Towards optical limiting applications at telecommunication wavelengths
- 2009
-
In: Optical Materials in Defence Systems Technology VI. - : SPIE - International Society for Optical Engineering. - 9780819477934 ; , s. 74870G-
-
Conference paper (peer-reviewed)abstract
- The rapid development of frequency-tunable pulsed lasers up to telecommunication wavelengths (1400-1600 nm) led to the design of new materials for nonlinear absorption in this spectral range. In this context, two families of near infra-red (NIR) chromophores, namely heptamethine cyanine and aza-borondipyrromethene (aza-bodipy) dyes were studied. In both cases, they show significant two-photon absorption (TPA) cross-sections in the 1400-1600 nm spectral range and display good optical power limiting (OPL) properties. OPL curves were interpreted on the basis of TPA followed by excited state absorption (ESA) phenomena. Finally these systems have several relevant properties like nonlinear absorption properties, gram scale synthesis and high solubility. In addition, they could be functionalized on several sites which open the way to numerous practical applications in biology, solid-state optical limiting and signal processing.
|
|
8. |
- Bergenudd, Helena, et al.
(author)
-
Heterogeneous iron(II)-chloride mediated radical polymerization of styrene
- 2009
-
In: Journal of Molecular Catalysis A. - : Elsevier BV. - 1381-1169 .- 1873-314X. ; 306:1-2, s. 69-76
-
Journal article (peer-reviewed)abstract
- In an attempt to perform atom transfer radical polymerization (ATRP) with a more environmentally friendly mediator, polymerization of styrene in the presence of iron(II)-chloride and EDTA was explored from a mechanistic point of view. The presence of EDTA, which normally can form a complex with FeCl2, had no influence on the polymerization results as both the mediator and EDTA were insoluble in the polymerization medium. A mechanism is suggested for the heterogeneous polymerization of styrene mediated by iron (II)-chloride in p-xylene at 50 °C. Varying the mediator amount more than 10-fold revealed that the rate limiting step at low mediator amounts was the adsorption of the initiator or dormant polymer to the mediator surface, whereas at higher mediator amounts, the rate limiting step was instead the activation step in the ATRP equilibrium. The mechanism changed to free radical polymerization in solution at a certain conversion, resulting in lower apparent rate constant and an increased amount of transfer and termination reactions. Chain extension with MMA showed that a significant proportion of the polymer chain ends were active also at high conversions.
|
|
9. |
|
|
10. |
- Bergenudd, Helena, et al.
(author)
-
Solvent Effects on ATRP of Oligo(ethylene glycol) Methacrylate. Exploring the Limits of Control
- 2009
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 42:9, s. 3302-3308
-
Journal article (peer-reviewed)abstract
- Five copper complexes in combination with six monomer-solvent mixtures have been used to investigate the solvent effects oil ATRP of oligo(ethylene glycol) methacrylate (OEGMA). The redox properties of the copper complexes in OEGMA-solvent mixtures and the apparent rate constants (k(p)(app)) for ATRP of OEGMA were correlated to the degree of control over the polymerizations. Based on this correlation, a general discussion of the limits of control in ATRIP is carried out. One of the key parameters for control in ATRP is the propagation rate constant, making the choice of monomer essential for the design of ail ATRP system. Also, the solvent effects oil the ATRP equilibrium constant (K-ATRP) affect the limit of control (i.e., the apparent rate constant above which control is lost). The choice of copper complex is also more important than the choice of solvent for the design of a well-controlled ATRP system.
|
|