1. |
- Babusci, D., et al.
(author)
-
Measurement of the branching fraction for the decay K-S -> pi mu nu with the KLOE detector
- 2020
-
In: Physics Letters B. - : ELSEVIER. - 0370-2693 .- 1873-2445. ; 804
-
Journal article (peer-reviewed)abstract
- Based on a sample of 300 million K-S mesons produced in phi -> KLKS decays recorded by the KLOE experiment at the DA Phi NE e(+)e(-) collider we have measured the branching fraction for the decay K-S -> pi mu nu. The K-S mesons are identified by the interaction of K-L mesons in the detector. The K-S -> pi mu nu decays are selected by a boosted decision tree built with kinematic variables and by a time-of-flight measurement. Signal efficiencies are evaluated with data control samples of K-L -> pi mu nu decays. A fit to the reconstructed muon mass distribution finds 7223 +/- 180 signal events. Normalising to the K-S -> pi(+)pi(-) decay events the result for the branching fraction is B(K-S -> pi mu nu) = (4.56 +/- 0.11(stat) +/- 0.17(syst)) x 10(-4). It is the first measurement of this decay mode and the result allows an independent determination of vertical bar V-us vertical bar and a test of the lepton-flavour universality. (c) 2020 The Author. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
|
|
2. |
- Alef, S., et al.
(author)
-
The BGOOD experimental setup at ELSA
- 2020
-
In: European Physical Journal A. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 56:4
-
Journal article (peer-reviewed)abstract
- The BGOOD experiment at the ELSA facility in Bonn has been commissioned within the framework of an international collaboration. The experiment pursues a systematic investigation of non-strange and strange meson photoproduction, in particular t-channel processes at low momentum transfer. The setup uniquely combines a central almost 4 π acceptance BGO crystal calorimeter with a large aperture forward magnetic spectrometer providing excellent detection of both neutral and charged particles, complementary to other setups such as Crystal Barrel, Crystal Ball, LEPS and CLAS.
|
|
3. |
- Mauritzson, N., et al.
(author)
-
Light-yield response of liquid scintillators using 2–6 MeV tagged neutrons
- 2024
-
In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - 0168-9002. ; 1062
-
Journal article (peer-reviewed)abstract
- Knowledge of the neutron light-yield response is crucial to the understanding of scintillator-based neutron detectors. In this work, neutrons from 2–6 MeV have been used to study the scintillation light-yield response of the liquid scintillators NE 213A, EJ 305, EJ 331 and EJ 321P using event-by-event waveform digitization. Energy calibration was performed using a GEANT4 model to locate the edge positions of the Compton distributions produced by gamma-ray sources. The simulated light yield for neutrons from a PuBe source was compared to measured recoil proton distributions, where neutron energy was selected by time-of-flight. This resulted in an energy-dependent Birks parameterization to characterize the non-linear response to the lower energy neutrons. The NE 213A and EJ 305 results agree very well with existing data and are reproduced nicely by the simulation. New results for EJ 331 and EJ 321P, where the simulation also reproduces the data well, are presented.
|
|
4. |
- Mauritzson, N., et al.
(author)
-
Technique for the measurement of intrinsic pulse-shape discrimination for organic scintillators using tagged neutrons
- 2022
-
In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002. ; 1039
-
Journal article (peer-reviewed)abstract
- Fast-neutron/gamma-ray pulse-shape discrimination has been performed for the organic liquid scintillators NE 213A and EJ 305 using a time-of-flight based neutron-tagging technique and waveform digitization on an event-by-event basis. Gamma-ray sources and a Geant4-based simulation were used to calibrate the scintillation-light yield. The difference in pulse shape for the neutron and gamma-ray events was analyzed by integrating selected portions of the digitized waveform to produce a figure-of-merit for neutron/gamma-ray separation. This figure-of-merit has been mapped as a function of detector threshold and also of neutron energy determined from time-of-flight. It shows clearly that the well-established pulse-shape discrimination capabilities of NE 213A are superior to those of EJ 305. The extra information provided by the neutron-tagging technique has resulted in a far more detailed assessment of the pulse-shape-discrimination capabilities of these organic scintillators.
|
|
5. |
- Mauritzson, N., et al.
(author)
-
Light-yield response of liquid scintillators using 2-6 MeV tagged neutrons
- 2024
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 1062
-
Journal article (peer-reviewed)abstract
- Knowledge of the neutron light -yield response is crucial to the understanding of scintillator-based neutron detectors. In this work, neutrons from 2-6 MeV have been used to study the scintillation light -yield response of the liquid scintillators NE 213A, EJ 305, EJ 331 and EJ 321P using event -by -event waveform digitization. Energy calibration was performed using a GEANT4 model to locate the edge positions of the Compton distributions produced by gamma -ray sources. The simulated light yield for neutrons from a PuBe source was compared to measured recoil proton distributions, where neutron energy was selected by time -of -flight. This resulted in an energy -dependent Birks parameterization to characterize the non-linear response to the lower energy neutrons. The NE 213A and EJ 305 results agree very well with existing data and are reproduced nicely by the simulation. New results for EJ 331 and EJ 321P, where the simulation also reproduces the data well, are presented.
|
|
6. |
- Messi, F., et al.
(author)
-
The neutron-tagging facility at Lund University
- 2020
-
In: Modern Neutron Detection : Proceedings of a Technical Meeting - Proceedings of a Technical Meeting. - 1011-4289. - 9789201265203 - 9789201266200 ; :1935, s. 287-297
-
Conference paper (other academic/artistic)abstract
- Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation process is in general long and expensive. The study of detector prototypes using neutron-emitting radioactive sources is a cost-effective solution, especially for preliminary investigations. That said, neutron-emitting sources have the general disadvantage of broad, structured, emitted-neutron energy ranges. Further, the emitted neutrons often compete with unwanted backgrounds of gamma-rays, alpha-particles, and fission-fragments. By blending experimental infrastructure such as shielding to provide particle beams with neutron-detection techniques such as tagging, disadvantages may be converted into advantages. In particular, a technique known as tagging involves exploiting the mixed-field generally associated with a neutron-emitting source to determine neutron time-of-flight and thus energy on an event-by-event basis. This allows for the definition of low-cost, precision neutron beams. The Source-Testing Facility, located at Lund University in Sweden and operated by the SONNIG Group of the Division of Nuclear Physics, was developed for just such low-cost studies. Precision tagged-neutron beams derived from radioactive sources are available around-the-clock for advanced detector diagnostic studies. Neutron measurements performed at the Source Testing Facility are thus cost-effective and have a very low barrier for entry. In this paper, we present an overview of the project.
|
|
7. |
- Babusci, D., et al.
(author)
-
Precision tests of quantum mechanics and CPT symmetry with entangled neutral kaons at KLOE
- 2022
-
In: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479.
-
Journal article (peer-reviewed)abstract
- The quantum interference between the decays of entangled neutral kaons is studied in the process phi -> KSKL -> pi(+)pi(-)pi(+)pi(-), which exhibits the characteristic Einstein-Podolsky-Rosen correlations that prevent both kaons to decay into pi(+)pi(-) at the same time. This constitutes a very powerful tool for testing at the utmost precision the quantum coherence of the entangled kaon pair state, and to search for tiny decoherence and CPT violation effects, which may be justified in a quantum gravity framework. The analysed data sample was collected with the KLOE detector at DA Phi NE, the Frascati phi-factory, and corresponds to an integrated luminosity of about 1.7 fb(-1), i.e. to about 1.7 x 10(9) phi -> KSKL decays produced. From the fit of the observed Delta t distribution, being Delta t the difference of the kaon decay times, the decoherence and CPT violation parameters of various phenomenological models are measured with a largely improved accuracy with respect to previous analyses. The results are consistent with no deviation from quantum mechanics and CPT symmetry, while for some parameters the precision reaches the interesting level at which - in the most optimistic scenarios - quantum gravity effects might show up. They provide the most stringent limits up to date on the considered models.
|
|
8. |
- Balossino, I., et al.
(author)
-
U-Rania : A neutron detector based on μ-rwell technology
- 2020
-
In: Journal of Instrumentation. - 1748-0221. ; 15:9
-
Journal article (peer-reviewed)abstract
- In the framework of the ATTRACT-uRANIA project, funded by the European Community, we are developing an innovative neutron imaging detector based on micro-Resistive WELL (μ-RWELL) technology. The μ-RWELL, based on the resistive detector concept, ensuring an efficient spark quenching mechanism, is a highly reliable device. It is composed by two main elements: A readout-PCB and a cathode. The amplification stage for this device is embedded in the readout board through a resistive layer realized by means of an industrial process with DLC (Diamond-Like Carbon). A thin layer of \boro on the copper surface of the catode allows the thermal neutrons detection through the release of \litio and α particles in the active volume. This technology has been developed to be an efficient and convenient alternative to the 3He shortage. The goal of the project is to prove the feasibility of such a novel neutron detector by developing and testing small planar prototypes with readout boards suitably segmented with strip or pad readout, equipped with existing electronics or readout in current mode. Preliminary results from the test with different prototypes, showing a good agreement with the simulation, will be presented together with construction details of the prototypes and the future steps of the project.
|
|
9. |
- Babusci, D., et al.
(author)
-
Upper limit on the eta -> pi(+)pi(-) branching fraction with the KLOE experiment
- 2020
-
In: Journal of High Energy Physics (JHEP). - : SPRINGER. - 1126-6708 .- 1029-8479. ; :10
-
Journal article (peer-reviewed)abstract
- Based on an integrated luminosity of 1.61 fb(-1)e(+)e(-) collision data collected with the KLOE detector at DA Phi NE, the Frascati phi -factory, a search for the P- and CP-violating decay eta -> pi (+)pi (-) has been performed. Radiative phi -> eta gamma decay is exploited to access the eta mesons. No signal is observed in the pi (+)pi (-) invariant mass spectrum, and the upper limit on the branching fraction at 90% confidence level is determined to be B(eta -> pi (+)pi (-)) < 4.9 x 10(-6), which is approximately three times smaller than the previous KLOE result. From the combination of these two measurements we get B( -> pi (+)pi (-)) < 4.4 x 10(-6) at 90% confidence level.
|
|
10. |
- Mauri, G., et al.
(author)
-
The Multi-Blade Boron-10-based neutron detector performance using a focusing reflectometer
- 2020
-
In: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 15:3
-
Journal article (peer-reviewed)abstract
- The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). AMOR exploits the Selene guide concept and can be considered a scaled-down demonstrator of Estia. The results of these tests are discussed. It will be shown how the characteristics of the Multi-Blade detector are features that allow the focusing reflectometry operation mode. Additionally the performance of the Multi-Blade, in terms of rate capability, exceeds current state-of-the-art technology. The improvements with respect to the previous prototypes are also highlighted; from background considerations to the linear and angular uniformity response of the detector.
|
|