| 1. |
- Hobirk, J., et al.
(author)
-
Improved confinement in JET hybrid discharges
- 2009
-
In: 36th EPS Conference on Plasma Physics 2009, EPS 2009 - Europhysics Conference Abstracts. - 9781622763368 ; , s. 150-153
-
Conference paper (peer-reviewed)
|
|
| 2. |
|
|
| 3. |
- Beurskens, M. N. A., et al.
(author)
-
Pedestal width and ELM size identity studies in JET and DIII-D; implications for ITER
- 2009
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 0741-3335 .- 1361-6587. ; 51:12, s. 124051-
-
Journal article (peer-reviewed)abstract
- The dependence of the H-mode edge transport barrier width on normalized ion gyroradius (rho* = rho/a) in discharges with type I ELMs was examined in experiments combining data for the JET and DIII-D tokamaks. The plasma configuration as well as the local normalized pressure (beta), collisionality (nu*), Mach number and the ratio of ion and electron temperature at the pedestal top were kept constant, while rho* was varied by a factor of four. The width of the steep gradient region of the electron temperature (T-e) and density (n(e)) pedestals normalized to machine size showed no or only a weak trend with rho*. A rho(1/2) or rho(1) dependence of the pedestal width, given by some theoretical predictions, is not supported by the current experiments. This is encouraging for the pedestal scaling towards ITER as it operates at lower rho* than existing devices. Some differences in pedestal structure and ELM behaviour were, however, found between the devices; in the DIII-D discharges, the n(e) and T-e pedestal were aligned at high rho* but the ne pedestal shifted outwards in radius relative to T-e as rho* decreases, while on JET the profiles remained aligned while rho* was scanned by a factor of two. The energy loss at an ELM normalized to the pedestal energy increased from 10% to 40% as rho* increased by a factor of two in the DIII-D discharges but no such variation was observed in the case of JET. The measured pedestal pressures and widths were found to be consistent with the predictions from modelling based on peeling-ballooning stability theory, and are used to make projections towards ITER
|
|
| 4. |
- Carlos, L. D., et al.
(author)
-
Nanoscopic photoluminescence memory as a fingerprint of complexity in self-assembled alkyl/siloxane hybrids
- 2007
-
In: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 19:3, s. 341-348
-
Journal article (peer-reviewed)abstract
- A thermally activated photoluminescence memory effect, induced by a reversible order-disorder phase transition of the alkyl chains, is reported for highly organized bilayer alkyl/siloxane hybrids (see figure; left at room temperature, right at 120 degrees C). The emission energy is sensitive to the annihilation/formation of the hydrogen-bonded amide-amide array displaying a unique nanoscopic sensitivity (ca. 150 nm).
|
|
| 5. |
- Lamalle, P. U., et al.
(author)
-
Expanding the operating space of ICRF on JET with a view to ITER
- 2006
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 46:2, s. 391-400
-
Journal article (peer-reviewed)abstract
- This paper reports on ITER-relevant ion cyclotron resonance frequency (ICRF) physics investigated on JET in 2003 and early 2004. Minority heating of helium three in hydrogen plasmas-(He-3)H-was systematically explored by varying the 3 He concentration and the toroidal phasing of the antenna arrays. The best heating performance (a maximum electron temperature of 6.2 keV with 5 MW of ICRF power) was obtained with a preferential wave launch in the direction of the plasma current. A clear experimental demonstration was made of the sharp and reproducible transition to the mode conversion heating regime when the 3 He concentration increased above similar to 2%. In the latter regime the best heating performance (a maximum electron temperature of 8 keV with 5 MW of ICRF power) was achieved with dipole array phasing, i.e. a symmetric antenna power spectrum. Minority heating of deuterium in hydrogen plasmas-(D)H-was also investigated but was found inaccessible because this scenario is too sensitive to impurity ions with Z/A = 1/2 such as C6+, small amounts of which directly lead into the mode conversion regime. Minority heating of up to 3% of tritium in deuterium plasmas was systematically investigated during the JET trace tritium experimental campaign (TTE). This required operating JET at its highest possible magnetic field (3.9 to 4 T) and the ICRF system at its lowest frequency (23 MHz). The interest of this scenario for ICRF heating at these low concentrations and its efficiency at boosting the suprathermal neutron yield were confirmed, and the measured neutron and gammay ray spectra permit interesting comparisons with advanced ICRF code simulations. Investigations of finite Larmor radius effects on the RF-induced high-energy tails during second harmonic (omega = 2 omega(c)) heating of a hydrogen minority in D plasmas clearly demonstrated a strong decrease in the RF diffusion coefficient at proton energies similar to 1 MeV in agreement with theoretical expectations. Fast wave heating and current drive experiments in deuterium plasmas showed effective direct electron heating with dipole phasing of the antennas, but only small changes of the central plasma current density were observed with the directive phasings, in particular at low single pass damping. New investigations of the heating efficiency of ICRF antennas confirmed its strong dependence on the parallel wavenumber spectrum. Advances in topics of a more technological nature are also summarized: ELM studies using fast RF measurements, the successful experimental demonstration of a new ELM-tolerant antenna matching scheme and technical enhancements planned on the JET ICRF system for 2006, they being equally strongly driven by the preparation for ITER.
|
|
| 6. |
- Lamalle, P.U, et al.
(author)
-
Expanding the operating space of ICRF on JET with a view to ITER
- 2006
-
In: Nucl. Fusion. ; 46, s. 391-
-
Journal article (peer-reviewed)abstract
- Mercury (Hg) has been used for millennia in many applications, primarily in artisanal mining and as an electrode in the chlor–alkali industry. It is anthropogenically emitted as a pollutant from coal fired power plants and naturally emitted, primarily from volcanoes. Its unique chemical characteristics enable global atmospheric transport and it is deposited after various processes, ultimately ending up in one of its final sinks, such as incorporated into deep sediment or bioaccumulated, primarily in the marine environment. All forms of Hg have been established as toxic, and there have been no noted biological benefits from the metal.Throughout time, there have been notable incidents of Hg intoxication documented, and the negative health effects have been documented to those chronically or acutely exposed. Today, exposure to Hg is largely diet or occupationally dependent, however, many are exposed to Hg from their amalgam fillings. This paper puts a tentative monetary value on Hg polluted food sources in the Arctic, where local, significant pollution sources are limited, and relates this to costs for strategies avoiding Hg pollution and to remediation costs of contaminated sites in Sweden and Japan. The case studies are compiled to help policy makers and the public to evaluate whether the benefits to the global environment from banning Hg and limiting its initial emission outweigh the benefits from its continued use or lack of control of Hg emissions. The cases we studied are relevant for point pollution sources globally and their remediation costs ranged between 2500 and 1.1 million US$ kg−1 Hg isolated from the biosphere. Therefore, regulations discontinuing mercury uses combined with extensive flue gas cleaning for all power plants and waste incinerators is cost effective.
|
|
| 7. |
- Nunes, S. C., et al.
(author)
-
Cationic and anionic environments in LiTFSI-doped di-ureasils with application in solid-state electrochromic devices
- 2008
-
In: Chemical Physics. - : Elsevier BV. - 0301-0104. ; 345:1, s. 32-40
-
Journal article (peer-reviewed)abstract
- Fourier Transform mid-infrared and Raman spectroscopies were used to investigate the cation/polymer, cation/urea bridge, cation/anion and hydrogen bonding interactions in poly(oxyethylene) (POE)/siloxane di-ureasil networks prepared by the sol-gel route and doped with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Materials with compositions 200 >= n >= 5 (where n expresses the molar ratio OCH2CH2/Li+) were studied. The Li+ ions coordinate to the urea carbonyl oxygen atoms over the whole range of salt concentration considered. Bonding to the ether oxygen atoms of the POE chains occurs at n
|
|
| 8. |
- Nunes, S. C., et al.
(author)
-
Spectroscopic and structural studies of di-ureasils doped with lithium perchlorate
- 2007
-
In: Electrochimica Acta. - : Elsevier BV. - 0013-4686. ; 53:4, s. 1466-1475
-
Journal article (peer-reviewed)abstract
- Di-urea cross-linked POE/siloxane hybrid ormolytes (di-ureasils) doped with a wide concentration range of lithium perchlorate trihydrate (LiClO4 center dot 3H(2)O) (200 >= n >= 0.5, where n expresses the salt content in terms of the number of ether oxygen atoms per Li+ ion) have been analysed by Fourier transform infrared and Raman (FT-IR and FT-Raman, respectively) spectroscopies and X-ray diffraction (XRD). The results obtained lead us to conclude that the xerogels with n >= 5 are totally amorphous. At n
|
|
| 9. |
- Silva, M. M., et al.
(author)
-
Sol-gel preparation of a di-ureasil electrolyte doped with lithium perchlorate
- 2006
-
In: Electrochimica Acta. - : Elsevier BV. - 0013-4686. ; 52:4, s. 1542-1548
-
Journal article (peer-reviewed)abstract
- Solid polymer electrolytes (SPEs) synthesized by the sol-gel process and designated as di-ureasils have been prepared through the incorporation of lithium perchlorate, LiClO4, into the d-U(2000) organic-inorganic hybrid network. Electrolytes with lithium salt compositions of n (where n indicates the number of oxyethylene units per Li+ ion) between ∞ and 0.5 were characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode, thermal analysis and Fourier transform Raman (FT-Raman) spectroscopy. The conductivity results obtained suggest that this system offers a quite significant improvement over previously characterized analogues doped with lithium triflate [S.C. Nunes, V. de Zea Bermudez, D. Ostrovskii, M.M. Silva, S. Barros, M.J. Smith, R.A. Sá Ferreira, L.D. Carlos, J. Rocha, E. Morales, J. Electrochem. Soc. 152 (2) (2005), A429]. "Free" perchlorate ions, detected in all the samples examined, are identified as the main charge carriers in the sample that yields the highest room temperature conductivity (n = 20). In the di-ureasils with n ≤ 10 ionic association is favoured and the ionic conductivity drops.
|
|
| 10. |
- Vaz-Moreira, Ivone, et al.
(author)
-
Sphingobium vermicomposti sp. nov., isolated from vermicompost.
- 2009
-
In: International journal of systematic and evolutionary microbiology. - : Microbiology Society. - 1466-5026 .- 1466-5034. ; 59:12, s. 3145-3149
-
Journal article (peer-reviewed)abstract
- Strain VC-230(T) was isolated from homemade vermicompost produced from kitchen waste. The isolate was a Gram-negative-staining, catalase- and oxidase-positive, motile rod-shaped bacterium able to grow at 15-37 degrees C and pH 6-8. On the basis of 16S rRNA gene sequence analysis, strain VC-230(T) was determined to belong to the family Sphingomonadaceae by its clustering with type strains of the genus Sphingobium, with Sphingobium chlorophenolicum ATCC 33790(T) (97.7 %) and Sphingobium herbicidovorans DSM 11019(T) (97.4 %) as its closest neighbours. The polar lipid pattern, the presence of spermidine and ubiquinone 10, the predominance of the cellular fatty acids C(18 : 1)omega7c/9t/12t, C(16 : 1)omega7c and C(16 : 0) and the G+C content of the genomic DNA supported the affiliation of this organism to the genus Sphingobium. The phylogenetic, chemotaxonomic, phenotypic and DNA-DNA hybridization analyses verify that strain VC-230(T) represents a novel species, for which the name Sphingobium vermicomposti sp. nov. is proposed. The type strain is VC-230(T) (=CCUG 55809(T) =DSM 21299(T)).
|
|
