1. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
2. |
- Abbondanno, U, et al.
(författare)
-
The data acquisition system of the neutron time-of-flight facility n_TOF at CERN
- 2005
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 538:1-3, s. 692-702
-
Tidskriftsartikel (refereegranskat)abstract
- The n_TOF facility at CERN has been designed for the measurement of neutron capture, fission and (n, xn) cross-sections with high accuracy. This requires a flexible and-due to the high instantaneous neutron flux-almost dead time free data acquisition system. A scalable and versatile data solution has been designed based on 8-bit flash-ADCs with sampling rates up to 2 GHz and 8 Mbyte memory buffer. The software is written in C and C++ and is running on PCs equipped with RedHat Linux.
|
|
3. |
- Di Mauro, A., et al.
(författare)
-
A New GEM-like Imaging Detector with Electrodes Coated with Resistive Layers
- 2006
-
Ingår i: 2006 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD, VOL 1-6. - : IEEE. - 9781424405619 ; , s. 3852-3859
-
Konferensbidrag (refereegranskat)abstract
- We have developed and tested several prototypes of GEM-like detectors with electrodes coated with resistive layers. These detectors can operate stably at gains close to 10(5) and if discharges appear at higher gains the protective layers restrict their energies so that they do not damage either the detector or the readout electronics. We discovered that the cathodes of these detectors could be coated by CsI layers and in such a way the detectors gain high efficiency for the UV photons. We also demonstrated that such detectors can operate stably in the cascade mode and high overall gains (similar to 10(6)) are reachable. This opens applications in several areas, for example in RICH or in noble liquid TPCs. The simplified prototype of the RICH detector was built and successfully tested in the laboratory. The first results of operation of the new detectors at cryogenic temperatures are given.
|
|
4. |
- Di Mauro, A., et al.
(författare)
-
Development of innovative micro-pattern gaseous detectors with resistive electrodes and first results of their applications
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 581:1-2, s. 225-231
-
Tidskriftsartikel (refereegranskat)abstract
- The paper summarizes our latest progress in the development of newly introduced micro-pattern gaseous detectors with resistive electrodes. These resistive electrodes protect the detector and the front-end electronics in case of occasional discharges and thus make the detectors very robust and reliable in operation. As an example, we describe in greater detail a recently developed GEM-like detector, fully spark-protected with electrodes made of resistive kapton. We discovered that all resistive layers used in these studies (including kapton) that are coated with photosensitive layers, such as CsI, can be used as efficient photocathodes for detectors operating in a pulse counting mode. There is a description of the first applications of such detectors combined with CsI or SbCs photocathodes for the detection of UV photons at room and cryogenic temperatures.
|
|
5. |
- Iacobaeus, C., et al.
(författare)
-
A high position resolution X-ray detector : An Edge on illuminated capillary plate combined with a gas amplification structure
- 2006
-
Ingår i: IEEE Transactions on Nuclear Science. - : Institute of Electrical and Electronics Engineers (IEEE). - 0018-9499 .- 1558-1578. ; 53:2, s. 554-561
-
Tidskriftsartikel (refereegranskat)abstract
- We have developed and successfully tested a prototype of a new high position resolution hybrid X-ray detector. It contains a thin-wall lead glass capillary plate converter of X-rays combined with a microgap parallel-plate avalanche chamber operating in various gas mixtures at 1 atm. The operation of these converters was studied in a wide range of X-ray energies (from 6 to 60 keV) at incident angles varying from 0-90 degrees. The detection efficiency, depending on the geometry, photon's energy, incident angle and the mode of operation was between 5-30% in single step mode and up to 50% in a multi-layered combination. Depending on the capillary's geometry, the position resolution achieved was between 50-250 mu m in digital form and was practically independent of the photon's energy or gas mixture. The usual lead glass capillary plates operated without noticeable charging up effects at counting rates of 50 Hz/mm(2) and hydrogen treated capillaries-up to 10(5) Hz/mm(2). The developed detector has several important potential advantages over the exciting X-ray detectors and may open new possibilities for medical imaging, for example in mammography, portal imaging, radiography (including security devices), as well as many other applications.
|
|
6. |
|
|
7. |
- Iacobaeus, C., et al.
(författare)
-
An X-ray scanner prototype based on a novel hybrid gaseous detector
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 573:02-jan, s. 61-64
-
Tidskriftsartikel (refereegranskat)abstract
- We have developed a prototype of a new type of hybrid X-ray detector. It contains a thin wall (few mu m) edge-illuminated lead glass capillary plate (acting as a converter of X-rays photons to primary electrons) combined with a microgap parallel-plate avalanche chamber operating in various gas mixtures at 1 atm. The operation of these converters was studied in a wide range of X-ray energies (from 6 to 60 keV) at incident angles varying from 0 degrees to 90 degrees. The detection efficiency, depending on the geometry, photon's energy, incident angle and the mode of operation, was between a few and similar to 40%. The position resolution achieved was similar to 50 mu m in digital form and was practically independent of the photon's energy or gas mixture. The developed detector may open new possibilities for medical imaging, for example in mammography, portal imaging, radiography (including security devices), crystallography and many other applications.
|
|
8. |
- Periale, L., et al.
(författare)
-
A study of the operation of especially designed photosensitive gaseous detectors at cryogenic temperatures
- 2006
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 567:1, s. 381-385
-
Tidskriftsartikel (refereegranskat)abstract
- In some experiments and applications there is need for large-area photosensitive detectors to operate at cryogenic temperatures. Nowadays, vacuum PMs are usually used for this purpose. We have developed special designs of planar photosensitive gaseous detectors able to operate at cryogenic temperatures. Such detectors are much cheaper than PMs and are almost insensitive to magnetic fields. Results of systematic measurements of their quantum efficiencies, the maximum achievable gains and long-term stabilities will be presented. The successful operation of these detectors open realistic possibilities in replacing PMs by photosensitive gaseous detectors in some applications dealing with cryogenic liquids; for example in experiments using noble liquid TPCs or noble liquid scintillating calorimeters.
|
|
9. |
- Periale, L., et al.
(författare)
-
Photosensitive gaseous detectors for cryogenic temperature applications
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 573:1-2, s. 302-305
-
Tidskriftsartikel (refereegranskat)abstract
- There are several proposals and projects today for building LXe time projection chambers (TPCs) for dark matter search. Important elements of these TPCs are the photomultipliers operating either inside LXe or in vapours above the liquid. We have recently demonstrated that photosensitive gaseous detectors (wire type and hole type) can operate perfectly well, until temperatures of LN2. In this paper, results of systematic studies of operation of the photosensitive version of these detectors (combined with reflective or semi-transparent CsI photocathodes) in the temperature interval of 300-150K are presented. In particular, it was demonstrated that both sealed and flushed by a gas detectors could operate at a quite stable fashion in a year/time scale. Obtained results strongly indicate that they can be cheap and simple alternatives to photomultipliers or avalanche solid-state detectors in LXe TPC applications.
|
|
10. |
- Periale, L., et al.
(författare)
-
The successful operation of hole-type gaseous detectors at cryogenic temperatures
- 2005
-
Ingår i: IEEE Transactions on Nuclear Science. - : Institute of Electrical and Electronics Engineers (IEEE). - 0018-9499 .- 1558-1578. ; 52:4, s. 927-931
-
Tidskriftsartikel (refereegranskat)abstract
- We have demonstrated that hole-type gaseous detectors, gas electron multipliers and capillary plates (CPs) can operate at temperatures down to 77 K. For example, a single CP can operate at gains above 10(3) in the entire temperature interval between 77 and 300 K. The same CP combined with CsI photocathodes operates perfectly well at gains of 100-1000, depending on the gas mixture. The obtained results open new fields of applications for CPs as detectors of ultraviolet light and charged particles at cryogenic temperatures: liquid noble gas time-projection chambers, detectors for weakly interacting massive particles or liquid Xe scintillating calorimeters, and cryogenic positron-emission tomography.
|
|