1. |
- De Temmerman, G., et al.
(author)
-
Interactions of diamond surfaces with fusion relevant plasmas
- 2009
-
In: Physica scripta. T. - : Institute of Physics Publishing (IOPP). - 0281-1847 .- 0031-8949 .- 1402-4896. ; T138, s. 014013-
-
Journal article (peer-reviewed)abstract
- The outstanding thermal properties of diamond and its low reactivity towards hydrogen may make it an attractive plasma-facing material for fusion and calls for a proper evaluation of its behaviour under exposure to fusion-relevant plasma conditions. Micro and nanocrystalline diamond layers, deposited on Mo and Si substrates by hot filament chemical vapour deposition (CVD), have been exposed both in tokamaks and in linear plasma devices to measure the erosion rate of diamond and study the modification of the surface properties induced by particle bombardment. Experiments in Pilot-PSI and PISCES-B have shown that the sputtering yield of diamond (both physical and chemical) was a factor of 2 lower than that of graphite. Exposure to detached plasma conditions in the DIII-D tokamak have evidenced a strong resistance of diamond against erosion under those conditions.
|
|
2. |
- Emmoth, Birger, et al.
(author)
-
In-situ measurements of carbon and deuterium deposition using the fast reciprocating probe in TEXTOR
- 2009
-
In: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 390-91, s. 179-182
-
Journal article (peer-reviewed)abstract
- Silicon samples were exposed in the scrape-off layer of the TEXTOR plasma using a fast reciprocating probe, with the aim of studying carbon deposition and deuterium retention during Dynamic Ergodic Divertor (DED) operation. Separate samples were exposed for 300 ms at the flat-top phase of neutral beam heated discharges. The exposure conditions were varied on a shot-to-shot basis by external magnetic perturbations generated by the DED in the m/n = 3/1, DC regime, base configuration. Nuclear Reaction Analysis (NRA) was used to characterise collector sample surfaces after their exposure. Enhanced concentrations of both carbon and deuterium (C 3-10 x 10(16) at./cm(2), D 8-60 x 10(15) at./cm(2)) were found. The D/C ratio was less than unity which indicates that most of the carbon and deuterium were co-deposited. Carbon e-folding lengths of about 2 cm were found on both toroidal sides of the probe independent of DED perturbations.
|
|
3. |
- Gasior, P., et al.
(author)
-
Laser-induced removal of co-deposits from graphitic plasma-facing components : Characterization of irradiated surfaces and dust particles
- 2009
-
In: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 390-91, s. 585-588
-
Journal article (peer-reviewed)abstract
- Laser-induced fuel desorption and ablation of co-deposited layers on limiter plates from the TEXTOR tokamak have been studied. Gas phase composition was monitored in situ, whereas the ex situ studies have been focused on the examination of irradiated surfaces and broad analysis of dust generated by ablation of co-deposits. The size of the dust grains is in the range of few nanometers to hundreds of micrometers. These are fuel-rich dust particles, as determined by nuclear reaction analysis. The presence of deuterium in dust indicates that not all fuel species are transferred to the gas phase during irradiation. This also suggests that photonic removal of fuel and the ablation of co-deposit from plasma-facing components may lead to the redistribution of fuel-containing dust to surrounding areas.
|
|
4. |
- Kreter, A., et al.
(author)
-
Fuel retention in carbon materials under ITER-relevant mixed species plasma conditions
- 2009
-
In: Physica scripta. T. - : Institute of Physics Publishing (IOPP). - 0281-1847 .- 0031-8949 .- 1402-4896. ; T138, s. 014012-
-
Journal article (peer-reviewed)abstract
- Samples of CFC NB41 and fine-grain graphite ATJ have been exposed to PISCES plasmas containing (i) pure deuterium, (ii) deuterium and beryllium, (iii) deuterium, beryllium and helium, and (iv) deuterium, beryllium and argon. Thermal desorption spectrometry (TDS) and nuclear reaction analysis (NRA) have been used to measure the amount and distribution of retained deuterium in the samples. For the case of pure deuterium plasma, parametric studies of deuterium retention in NB41 have been done with variations of the incident deuterium fluence (Phi = 1 x 10(25)-5 x 10(26) m(-2)), ion energy (E-i = 20-120 eV) and sample surface temperature (T-s = 370-820 K). It has been found, that for T-s = 470K the retention scales as Phi(0.35). For T-s = 820K the retention saturates at a level of similar to 10(21) Dm(-2). The retention increases with E-i and drops with higher T-s. At T-s = 720 K, the beryllium seeding results in a building of a protective beryllium carbide layer, which appears to prevent the in-bulk diffusion of deuterium, thus reducing the retention. Admixture of Ar and, in the case of low E-i, He leads to a significant reduction of the retention.
|
|
5. |
- Lundberg, Jon O., et al.
(author)
-
Nitrate and nitrite in biology, nutrition and therapeutics
- 2009
-
In: Nature Chemical Biology. - : Springer Science and Business Media LLC. - 1552-4450 .- 1552-4469. ; 5:12, s. 865-869
-
Journal article (peer-reviewed)abstract
- Inorganic nitrate and nitrite from endogenous or dietary sources are metabolized in vivo to nitric oxide (NO) and other bioactive nitrogen oxides. The nitrate-nitrite-NO pathway is emerging as an important mediator of blood flow regulation, cell signaling, energetics and tissue responses to hypoxia. The latest advances in our understanding of the biochemistry, physiology and therapeutics of nitrate, nitrite and NO were discussed during a recent 2-day meeting at the Nobel Forum, Karolinska Institutet in Stockholm.
|
|
6. |
- Martinez, J P, et al.
(author)
-
Accuracy of QT Measurement in the EASI-derived 12-lead ECG
- 2006
-
In: Conference proceedings (IEEE Engineering in Medicine and Biology Society. Conf.). - 1557-170X. ; 1, s. 3986-3989
-
Conference paper (peer-reviewed)abstract
- The purpose of this study is to assess QT interval measurements from the EASI 12-lead ECG as compared to the standard 12-lead ECG. The QT interval was automatically measured in simultaneously recorded standard and EASI 12- lead ECGs, using a validated wavelet-based delineator. The agreement between the two sets of measurements was quantified both on a lead-by-lead basis and a multilead basis. The results show an acceptable agreement between QT measurements in the two lead systems, with correlation coefficients (CC) 0.91-0.98 depending on the lead. Standard deviations range from 9.2 ms to 26.4 ms depending on the selected lead. In a few patients large inter-system differences were found, mainly due to different T wave morphologies. Using a multilead delineation, QT intervals were considerably more stable than single-lead measurements and resulted in a much better agreement between the two lead systems (CC: 0.98, QT difference: 1.1 ms ± 9.8 ms). Thus, EASI-derived 12- lead ECG may be used for reliable QT monitoring when the multilead delineation approach is adopted.
|
|
7. |
|
|
8. |
- Bergsåker, Henric, et al.
(author)
-
Nuclear reaction analysis with ion microbeam of cross sections of surface layers deposited in tokamak divertor
- 2007
-
In: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 362:2-3, s. 215-221
-
Journal article (peer-reviewed)abstract
- Ion micro beam analysis has been applied to the investigation of plasma deposited layers covering the divertor tiles in the JET tokamak. Since the layers are about 100 μm thick they are too thick to be completely investigated by ordinary ion beam analysis. Cross sections of the layers were prepared by cutting and polishing. Elemental depth profiles were determined from the two dimensional images that could be derived by nuclear reaction analysis and resonant backscattering spectrometry, using ion beams focused to a few μm spot size. A combination of analysis methods are shown, which allow measurements of the concentration profiles of carbon, beryllium, deuterium, oxygen and stainless steel components at levels of a few percent, with an accuracy better than 10%.
|
|
9. |
|
|
10. |
- Darnerud, P O, et al.
(author)
-
Dietary intake estimations of organohalogen contaminants (dioxins, PCB, PBDE and chlorinated pesticides, e.g. DDT) based on Swedish market basket data
- 2006
-
In: Food and Chemical Toxicology. - : Elsevier BV. - 0278-6915 .- 1873-6351. ; 44:9, s. 1597-1606
-
Journal article (peer-reviewed)abstract
- By use of a Swedish Market basket study from 1999, in which foods were sampled from four regions, the dietary intake of persistent organic pollutants (POPs) was assessed. Based on earlier data, six food groups (fish, meat, dairy products, egg, fats/oils, and pastries; comprising 52 food items) were selected for POP analyses. Homogenates from these six groups were subjected to POP analyses and levels presented on dioxins (PCDD/PCDFs), dioxin-like PCBs, PCB-153, summation operatorPCBs, BDE-47, summation operatorPBDEs, DDE, summation operatorDDTs, HCB, summation operatorHCHs, and summation operatorchlordanes, after adjusting non-quantified levels to 1/2 LOQ. For all compounds, the fish homogenate contained the comparatively highest levels, on a fresh weight basis. Intake calculations based on the six food groups showed that summation operatorPCBs and summation operatorDDTs gave per capita intakes of 615 and 523 ng/day, respectively, that the estimated summation operatorPBDE intake was 51 ng/day and that of dioxins and dioxin-like PCBs was 96 pg WHO-TEQ/day. The estimated mean intakes were below (total-TEQ: 1.3 pg/kgbw/day) or well below (summation operatorDDTs: 8.9 ng/kgbw/day) internationally agreed intake limits (total-TEQ: 2 pg/kgbw/day; summation operatorDDTs: 10,000 ng/kgbw/day). A number of uncertainty factors, including analytical limitations due to low POP levels in food, give reason for caution in the use of the presented intake data. However, the intake estimations of dioxins, summation operatorPCBs and summation operatorPBDEs are well in accordance to calculations of POP intakes in Sweden made by alternate methods.
|
|