1. |
- Abdollahi, Mehdi, 1985, et al.
(author)
-
Carboxymethyl cellulose-agar biocomposite film activated with summer savory essential oil as an antimicrobial agent
- 2019
-
In: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 126, s. 561-568
-
Journal article (peer-reviewed)abstract
- Carboxymethyl cellulose (CMC)-agar biocomposite film was developed by a solvent casting method and the effects of summer savory essential oil (SSEO) at 0.5, 1.0 and 1.5% v/v on antimicrobial, microstructural, mechanical and optical properties as well as water sensitivity of the films were studied. Results showed that incorporation of SSEO into the biocomposite film developed active films with good antimicrobial agent growth inhibition activity against Gram-positive bacteria (S. aureus, B. cereus and L. monocytogenes) and less powerfully against Gram-negative bacteria (E. coli). Addition of the SSEO at 1.0 and 1.5% increased microstructural heterogeneity of the films and hence significantly (p < 0.05) increased water vapor permeability of the films while reducing their tensile strength. In contrast, mechanical flexibility and surface hydrophobicity of the films was significantly (p < 0.05) improved as a function of SSEO addition. The active films showed substantially lower swelling ratio compared to the CMC-agar film when 1.5% SSEO was added, but the transparency of the films was reduced. Finally, the results showed that SSEO can act as an antimicrobial agent in combination with CMC-agar film. However, it modifies properties of the film depending on the applied concentration.
|
|
2. |
- Lozano, Rafael, et al.
(author)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Journal article (peer-reviewed)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
3. |
- Abdollahi, Mehdi, 1985, et al.
(author)
-
Dynamic rheological, microstructural and physicochemical properties of blend fish protein recovered from kilka (Clupeonella cultriventris) and silver carp (Hypophthalmichthys molitrix) by the pH-shift process or washing-based technology
- 2017
-
In: Food Chemistry. - : Elsevier BV. - 0308-8146 .- 1873-7072. ; 229, s. 695-709
-
Journal article (peer-reviewed)abstract
- This study aimed to evaluate how blending pH-shift produced protein isolates from gutted kilka (Clupeonella cultriventris) and silver carp (Hypophthalmichthys molitrix) affected dynamic rheological and chemical properties of the proteins as well as microstructural and physico-mechanical properties of produced gels. Studied variables were protein solubilization pH (acid vs. alkaline) and blending step (before or after protein precipitation). Comparisons were made with conventionally washed minces from kilka and silver carp fillets; either alone or after blending. Rheological studies revealed that blending alkali-produced protein isolates before precipitation resulted in rapid increase of G′ reflecting the formation of intermolecular protein-protein interactions with higher rate. Furthermore, blending of alkali-produced protein isolates and washed minces, respectively, of kilka and silver carp improved physico-mechanical properties of the resultant gels compared to pure kilka proteins. However, the pH-shift method showed higher efficacy in development of blend surimi at the same blending ratio compared to the conventional washing.
|
|
4. |
- Abdollahi, Mehdi, 1985, et al.
(author)
-
Effect of microbial transglutaminase and setting condition on gel properties of blend fish protein isolate recovered by alkaline solubilisation/isoelectric precipitation
- 2019
-
In: International Journal of Food Science and Technology. - : Wiley. - 1365-2621 .- 0950-5423. ; 54:3, s. 762-770
-
Journal article (peer-reviewed)abstract
- The effect of microbial transglutaminase (M‐TGase) (0–0.6 units g−1 sample) and setting condition (25 °C/180 min, 30 °C/120 min, 35 °C/60 min and 40 °C/30 min) on gel properties of blend protein isolate of gutted kilka and silver carp was studied. The protein isolate provided a good substrate for M‐TGase activity so that a low amount of M‐TGase (0.2 unit g−1 sample) substantially improved textural properties and water holding capacity (WHC) of the gels. Breaking force of the gels was positively affected by M‐TGase up to 0.6 unit g−1 sample, but it negatively affected their WHC. Prior setting at 25–35 °C increased the breaking force of proteins compared to directly heated gel, resulting in maximum breaking force at 35 °C/60 min. However, the setting at 40 °C/30 min caused proteolysis, which was reflected in higher amounts of TCA‐soluble peptides and gel weakening. Denser microstructure and higher myosin heavy chain polymerisation observed in the gels which experienced the setting was well correlated with improvement in textural properties.
|
|
5. |
|
|
6. |
- Afsharmazayejani, R., et al.
(author)
-
HoneyWiN : Novel honeycomb-based wireless NoC architecture in many-core era
- 2018
-
In: Lecture Notes in Computer Science. - Cham : Springer Verlag. - 0302-9743 .- 1611-3349. ; 10824 LNCS, s. 304-316
-
Journal article (peer-reviewed)abstract
- Although NoC-based systems with many cores are commercially available, their multi-hop nature has become a bottleneck on scaling performance and energy consumption parameters. Alternatively, hybrid wireless NoC provides a postern by exploiting single-hop express links for long-distance communications. Also, there is a common wisdom that grid-like mesh is the most stable topology in conventional designs. That is why almost all of the emerging architectures had been relying on this topology as well. In this paper, first we challenge the efficiency of the grid-like mesh in emerging systems. Then, we propose HoneyWiN, a hybrid reconfigurable wireless NoC architecture that relies on the honeycomb topology. The simulation results show that on average HoneyWiN saves 17% of energy consumption while increases the network throughput by 10% compared to its wireless mesh counterpart.
|
|
7. |
- Albofetileh, Mehdi, et al.
(author)
-
Efficacy of activated alginate-based nanocomposite films to control Listeria monocytogenes and spoilage flora in rainbow trout slice
- 2016
-
In: Journal of Food Science and Technology. - : Springer Science and Business Media LLC. - 0022-1155 .- 0975-8402. ; 53:1, s. 521-530
-
Journal article (peer-reviewed)abstract
- Essential oils of clove, coriander, caraway, marjoram, cinnamon, and cumin were tested for their antilisterial activity by application of agar diffusion assay (experiment 1). Marjoram essential oil (MEO) showed the highest inhibitory effect, followed by clove and cinnamon. Subsequently, these essential oils were incorporated to alginate/clay nanocomposite films and antilisterial effectiveness of the films was studied in a model solid food system during 12 days at 10 °C (experiment 2). The results revealed that the films with MEO were more effective against Listeria monocytogenes in the model step. Finally, alginate-clay film incorporating 1 % MEO was applied to inoculated trout slices during refrigerated storage (4 °C) for 15 days (experiment 3). The control and the wrapped fish samples were analyzed periodically for microbiological (L. monocytogenes, total viable count, psychrotrophic count) and chemical (TVB-N) properties. The results demonstrated that alginate-clay films enriched with 1 % MEO significantly delayed the growth of L. monocytogenes during the 15-day storage with final counts reaching 6.23 log CFU/g while the counts in control samples were significantly higher reaching 7.38 log CFU/g (p < 0.05). Furthermore, active films efficiently reduced total viable count and psychrotrophic count as well as TVB-N in the fish slice during refrigerated storage.
|
|
8. |
- Albofetileh, Mehdi, et al.
(author)
-
Morphological, physico‐mechanical, and antimicrobial properties of sodium alginate‐montmorillonite nanocomposite films incorporated with marjoram essential oil
- 2018
-
In: Journal of Food Processing and Preservation. - : Hindawi Limited. - 0145-8892 .- 1745-4549. ; 42:5
-
Journal article (peer-reviewed)abstract
- Combined effect of montmorillonite nanoclay (MMT) (3%w/w) and Origanum majorana essential oil (MO) (0.5, 1.0, and 1.5%v/v) on microstructural (SEM, TEM, and XRD), water sensitivity, barrier, mechanical, thermal, and antibacterial properties of sodium alginate (SA) was studied. Results showed that, addition of both MMT and MO reduced water solubility of SA film up to 47% while MO increased water vapor permeability of SA/MMT films. MO improved surface hydrophobicity of SA/MMT film but tensile strength tend to decrease when both MMT and MO (≥ 1%v/v) were added into film formulation. The nanocomposite film inhibited the growth of Escherichia coli, Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus at 1.5% MO concentration confirming the functionality of the films. Finally, combined application of MMT and MO could provide a tool for developing an active SA film with minimized side effects caused by the hydrophobic nature of the essential oil.
|
|
9. |
- Bahram, Somayeh, et al.
(author)
-
Effect of whey Protein Concentrate Coating Cinamon Oil on Quality and Shelf Life of Refrigerated Beluga Sturegeon (Huso huso)
- 2016
-
In: Journal of Food Processing and Preservation. - : Wiley. - 0145-8892 .- 1745-4549. ; 39:6, s. 743-749
-
Journal article (peer-reviewed)abstract
- This study evaluated the effect of whey protein concentrate (WPC) coating incorporated with 1.5% cinnamon essential oil (CEO) on the quality of beluga sturgeon (Huso huso) fillet during refrigerated storage (4 ± 1C). Microbial, chemical, and sensorial properties of the fillets were measured for 20 days. Whey protein edible coating containing 1.5% CEO could extend preserving ability of beluga sturgeon by about 8 days by retarding lipid oxidation and microbial deterioration as reflected by Peroxide Value, Thiobarbituric acid and total viable count. Samples coated with WPC containing CEO also had the lowest pH and Total Volatile Basic Nitrogen. Moreover, the coating did not negatively affect sensory attributes of the fillets.
|
|
10. |
|
|