1. |
- Murari, A., et al.
(author)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
In: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Journal article (peer-reviewed)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
2. |
|
|
3. |
|
|
4. |
- Ericsson, A., et al.
(author)
-
Crystallization of a Zr-based metallic glass produced by laser powder bed fusion and suction casting
- 2021
-
In: Journal of Non-Crystalline Solids. - : Elsevier. - 0022-3093 .- 1873-4812. ; 571
-
Journal article (peer-reviewed)abstract
- The crystallization behaviour during low temperature annealing of samples of the Zr59.3Cu28.8Al10.4Nb1.5 (at%) bulk metallic glass produced by suction casting and the laser powder bed fusion (LPBF) process were studied with small angle neutron scattering (SANS), X-ray diffraction and scanning electron microscopy. The in-situ SANS measurements during isothermal annealing reveals that the phase separation in the LPBF processed material proceeds at a smaller characteristic length-scale than the cast material. Quantitative analysis of the SANS data shows that, while the crystallization process in both materials proceed through rapid nucleation followed by diffusion limited growth, the LPBF processed material crystallizes with a smaller cluster size and at a higher rate. The smaller cluster size is attributed to the elevated oxygen content in the LPBF processed material which reduces the nucleation barrier and thus the thermal stability.
|
|
5. |
- Ericsson, A., et al.
(author)
-
Transient nucleation in selective laser melting of Zr-based bulk metallic glass
- 2020
-
In: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 195
-
Journal article (peer-reviewed)abstract
- The crystallization rate during selective laser melting (SLM) of bulk metallic glasses (BMG) is a critical factor in maintaining the material's amorphous structure. To increase the understanding of the interplay between the SLM process and the crystallization behavior of BMGs, a numerical model based on the classical nucleation theory has been developed that accounts for the rapid temperature changes associated with SLM. The model is applied to SLM of a Zr-based BMG and it is shown that the transient effects, accounted for by the model, reduce the nucleation rate by up to 15 orders of magnitude below the steady-state nucleation rate on cooling, resulting in less nuclei during the build process. The capability of the proposed modelling approach is demonstrated by comparing the resulting crystalline volume fraction to experimental findings. The agreement between model predictions and the experimental results clearly suggests that transient nucleation effects must be accounted for when considering the crystallization rate during SLM processing of BMGs.
|
|
6. |
- Lindwall, Johan, et al.
(author)
-
Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting
- 2022
-
In: Journal of Materials Research and Technology. - : Elsevier. - 2238-7854 .- 2214-0697. ; 16, s. 1165-1178
-
Journal article (peer-reviewed)abstract
- Additive manufacturing by laser-based powder bed fusion is a promising technique for bulk metallic glass production. But, reheating by deposition of subsequent layers may cause local crystallisation of the alloy. To investigate the crystalline phase evolution during laser scanning of a Zr-based metallic glass-forming alloy, a simulation strategy based on the finite element method and the classical nucleation theory has been developed and compared with experimental results from multiple laser remelting of a single-track. Multiple laser remelting of a single-track demonstrates the crystallisation behaviour by the influence of thermal history in the reheated material. Scanning electron microscopy and transmission electron microscopy reveals the crystalline phase evolution in the heat affected zone after each laser scan. A trend can be observed where repeated remelting results in an increased crystalline volume fraction with larger crystals in the heat affected zone, both in simulation and experiment. A gradient of cluster number density and mean radius can also be predicted by the model, with good correlation to the experiments. Prediction of crystallisation, as presented in this work, can be a useful tool to aid the development of process parameters during additive manufacturing for bulk metallic glass formation.
|
|
7. |
- Pasquini, Luca, et al.
(author)
-
Magnesium- and intermetallic alloys-based hydrides for energy storage : modelling, synthesis and properties
- 2022
-
In: Progress in Energy. - : Institute of Physics Publishing (IOPP). - 2516-1083. ; 4:3
-
Research review (peer-reviewed)abstract
- Hydrides based on magnesium and intermetallic compounds provide a viable solution to the challenge of energy storage from renewable sources, thanks to their ability to absorb and desorb hydrogen in a reversible way with a proper tuning of pressure and temperature conditions. Therefore, they are expected to play an important role in the clean energy transition and in the deployment of hydrogen as an efficient energy vector. This review, by experts of Task 40 'Energy Storage and Conversion based on Hydrogen' of the Hydrogen Technology Collaboration Programme of the International Energy Agency, reports on the latest activities of the working group 'Magnesium- and Intermetallic alloys-based Hydrides for Energy Storage'. The following topics are covered by the review: multiscale modelling of hydrides and hydrogen sorption mechanisms; synthesis and processing techniques; catalysts for hydrogen sorption in Mg; Mg-based nanostructures and new compounds; hydrides based on intermetallic TiFe alloys, high entropy alloys, Laves phases, and Pd-containing alloys. Finally, an outlook is presented on current worldwide investments and future research directions for hydrogen-based energy storage.
|
|
8. |
- Tidefelt, Mattias, et al.
(author)
-
In Situ Mapping of Phase Evolutions in Rapidly Heated Zr-Based Bulk Metallic Glass with Oxygen Impurities
- 2024
-
In: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 11:16
-
Journal article (peer-reviewed)abstract
- Metallic glasses exhibit unique mechanical properties. For metallic glass composites (MGC), composed of dispersed nanocrystalline phases in an amorphous matrix, these properties can be enhanced or deteriorated depending on the volume fraction and size distribution of the crystalline phases. Understanding the evolution of crystalline phases during devitrification of bulk metallic glasses upon heating is key to realizing the production of these composites. Here, results are presented from a combination of in situ small- and wide-angle X-ray scattering (SAXS and WAXS) measurements during heating of Zr-based metallic glass samples at rates ranging from 102 to 104 Ks-1 with a time resolution of 4ms. By combining a detailed analysis of scattering experiments with numerical simulations, for the first time, it is shown how the amount of oxygen impurities in the samples influences the early stages of devitrification and changes the dominant nucleation mechanism from homogeneous to heterogeneous. During melting, the oxygen rich phase becomes the dominant crystalline phase whereas the main phases dissolve. The approach used in this study is well suited for investigation of rapid phase evolution during devitrification, which is important for the development of MGC. Oxygen impurities impact on phase-transformations during rapid heating of Zr-based metallic glass Zr59.3Cu28.8Al10.4Nb1.5 is thoroughly investigated using a multi-technique approach. During devitrification, the extracted phase evolutions reveal that the phase fraction hierarchy correlates with the oxygen impurity concentration. Numerical simulations with a heterogeneous nucleation mode capture the experimental observations. During melting, the oxygen-rich phase becomes the dominant phase. image
|
|
9. |
|
|
10. |
- Borisov, Vladislav, et al.
(author)
-
Tuning skyrmions in B20 compounds by 4d and 5d doping
- 2022
-
In: Physical Review Materials. - : American Physical Society (APS). - 2475-9953. ; 6:8
-
Journal article (peer-reviewed)abstract
- Skyrmion stabilization in novel magnetic systems with the B20 crystal structure is reported here, primarily based on theoretical results. The focus is on the effect of alloying on the 3d sublattice of the B20 structure by substitution of heavier 4d and 5d elements, with the ambition to tune the spin-orbit coupling and its influence on magnetic interactions. State-of-the-art methods based on density functional theory are used to calculate both isotropic and anisotropic exchange interactions. Significant enhancement of the Dzyaloshinskii-Moriya interaction is reported for 5d-doped FeSi and CoSi, accompanied by a large modification of the spin stiffness and spiralization. Micromagnetic simulations coupled to atomistic spin-dynamics and ab initio magnetic interactions reveal the spin-spiral nature of the magnetic ground state and field-induced skyrmions for all these systems. Especially small skyrmions similar to 50 nm are predicted for Co0.75Os0.25Si, compared to similar to 148 nm for Fe0.75Co0.25Si. Convex-hull analysis suggests that all B20 compounds considered here are structurally stable at elevated temperatures and should be possible to synthesize. This prediction is confirmed experimentally by synthesis and structural analysis of the Ru-doped CoSi systems discussed here, both in powder and in single-crystal forms.
|
|