| 1. |
- Blomberg, Sara, et al.
(author)
-
Combining synchrotron light with laser technology in catalysis research
- 2018
-
In: Journal of Synchrotron Radiation. - 1600-5775 .- 0909-0495. ; 25:5, s. 1389-1394
-
Journal article (peer-reviewed)abstract
- High-energy surface X-ray diffraction (HESXRD) provides surface structural information with high temporal resolution, facilitating the understanding of the surface dynamics and structure of the active phase of catalytic surfaces. The surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface, and the catalytic activity of the sample itself may affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, planar laser-induced fluorescence (PLIF) and HESXRD have been combined during the oxidation of CO over a Pd(100) crystal. PLIF complements the structural studies with an instantaneous two-dimensional image of the CO2 gas phase in the vicinity of the active model catalyst. Here the combined HESXRD and PLIF operandomeasurements of CO oxidation over Pd(100) are presented, allowing for an improved assignment of the correlation between sample structure and the CO2distribution above the sample surface with sub-second time resolution.
|
|
| 2. |
- Busch, Michael, 1983, et al.
(author)
-
Adsorption of NO on Fe3O4(111)
- 2018
-
In: Chemical Physics Letters. - : Elsevier BV. - 0009-2614 .- 1873-4448. ; 693, s. 84-87
-
Journal article (peer-reviewed)abstract
- Adsorption of NO on Fe 3 O 4 (111) is studied by density functional theory (DFT) calculations. NO is preferably adsorbed atop the octahedral site which has a clearly higher adsorption energy than the tetrahedral site. The difference in adsorption energy correlates with differences in adsorption geometries and N–O stretch vibrations. The results are in good agreement with temperature programmed desorption (TPD) and reflection-adsorption IR spectroscopy (RAIRS) measurements and provide an explanation of the observation of only one vibrational mode despite two distinct TPD features.
|
|
| 3. |
- Gustafson, Johan, et al.
(author)
-
The Role of Oxides in Catalytic CO Oxidation over Rhodium and Palladium
- 2018
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 8:5, s. 4438-4445
-
Journal article (peer-reviewed)abstract
- Catalytic CO oxidation is a seemingly simple reaction between CO and O2 molecules, one of the reactions in automotive catalytic converters, and the fruit-fly reaction in model catalysis. Surprisingly, the phase responsible for the catalytic activity is still under debate, despite decades of investigations. We have performed a simple but yet conclusive study of single crystal Rh and Pd model catalysts, resolving this controversy. For Rh, the oxygen-covered metallic surface is more active than the oxide, while for Pd, thin oxidefilms are at least as active as the metallic surface, but a thicker oxide is less active. Apart from resolving a long-standing debate, our results pinpoint important design principles for oxidation catalysts as to prevent catalytic extinction at high oxygen exposures.
|
|
| 4. |
- Hagman, Benjamin, et al.
(author)
-
Steps Control the Dissociation of CO2 on Cu(100)
- 2018
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 140:40, s. 12974-12979
-
Journal article (peer-reviewed)abstract
- CO2 reduction reactions, which provide one route to limit the emission of this greenhouse gas, are commonly performed over Cu-based catalysts. Here, we use ambient pressure X-ray photoelectron spectroscopy together with density functional theory to obtain an atomistic understanding of the dissociative adsorption of CO2 on Cu(100). We find that the process is dominated by the presence of steps, which promote both a lowering of the dissociation barrier and an efficient separation between adsorbed O and CO, reducing the probability for recombination. The identification of steps as sites for efficient CO2 dissociation provides an understanding that can be used in the design of future CO2 reduction catalysts.
|
|
| 5. |
- Mehar, Vikram, et al.
(author)
-
Understanding the Intrinsic Surface Reactivity of Single-Layer and Multilayer PdO(101) on Pd(100)
- 2018
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 8:9, s. 8553-8567
-
Journal article (peer-reviewed)abstract
- We investigated the intrinsic reactivity of CO on single-layer and multilayer PdO(101) grown on Pd(100) using temperature-programmed reaction spectroscopy (TPRS) and reflection absorption infrared spectroscopy (RAIRS) experiments, as well as density functional theory (DFT) calculations. We find that CO binds more strongly on multilayer than single-layer PdO(101) (∼119 kJ/mol vs 43 kJ/mol), and that CO oxidizes negligibly on single-layer PdO(101), whereas nearly 90% of a saturated layer of CO oxidizes on multilayer PdO(101) during TPRS experiments. RAIRS further shows that CO molecules adsorb on both bridge-Pdcusand atop-Pdcussites (coordinatively unsaturated Pd sites) of single-layer PdO(101)/Pd(100), while CO binds exclusively on atop-Pdcussites of multilayer PdO(101). The DFT calculations reproduce the much stronger binding of CO on multilayer PdO(101), as well as the observed binding site preferences, and reveal that the stronger binding is entirely responsible for the higher CO oxidation activity of multilayer PdO(101)/Pd(100). We show that the O atom below the Pdcussite, present only on multilayer PdO(101), modifies the electronic states of the Pdcusatom in a way that enhances the CO-Pdcusbonding. Lastly, we show that a precursor-mediated kinetic model, with energetics determined from the present study, predicts that the intrinsic CO oxidation rates achieved on both single-layer and multilayer PdO(101)/Pd(100) can be expected to exceed the gaseous CO diffusion rate to the surface during steady-state CO oxidation at elevated pressures, even though the intrinsic reaction rates are 4-5 orders of magnitude lower on single-layer PdO(101)/Pd(100) than on multilayer PdO(101)/Pd(100).
|
|
| 6. |
- Posada Borbon, Alvaro, 1990, et al.
(author)
-
Initial oxidation of Cu(100) studied by X-ray photo-electron spectroscopy and density functional theory calculations
- 2018
-
In: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 675, s. 64-69
-
Journal article (peer-reviewed)abstract
- Density functional theory calculations and ambient pressure X-ray photoelectron spectroscopy are used to investigate initial oxidation of Cu(100). Surface stability with respect to oxygen coverage is calculated together with O 1s core level shifts. Oxidation of Cu(100) is found to occur via the formation of a p(2 × 2) overlayer (0.25 ML) followed by a reconstructed r2×r2 R45° -O missing-row (MR) structure (0.50 ML). A c(4 × 6) structure with a 0.3 ML coverage is close in stability for intermediate oxygen chemical potentials. The relative stability is found to be weakly dependent on the applied exchange-correlation functional. The calculated shifts in the O 1s binding energy are in good agreement with the measured evolution of the binding energy. The shift to higher O 1s binding energies with increasing oxygen coverage is found to correlate with the charge on neighboring copper atoms. The O 1s core-level shifts here obtained with CO2 as oxidant, are similar to previous measurements of Cu(100) oxidation with O2.
|
|
| 7. |
- Schiller, Frederik, et al.
(author)
-
Catalytic Oxidation of Carbon Monoxide on a Curved Pd Crystal : Spatial Variation of Active and Poisoning Phases in Stationary Conditions
- 2018
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 140:47, s. 16245-16252
-
Journal article (peer-reviewed)abstract
- Understanding nanoparticle catalysis requires novel approaches in which adjoining crystal orientations can be studied under the same reactive conditions. Here we use a curved palladium crystal and near-ambient pressure X-ray photoemission spectroscopy to characterize chemical species during the catalytic oxidation of CO in a whole set of surfaces vicinal to the (111) direction simultaneously. By stabilizing the reaction at fixed temperatures around the ignition point, we observe a strong variation of the catalytic activity across the curved surface. Such spatial modulation of the reaction stage is straightforwardly mapped through the photoemission signal from active oxygen species and poisoning CO, which are shown to coexist in a transient regime that depends on the vicinal angle. Line-shape analysis and direct comparison with ultrahigh vacuum experiments help identifying and quantifying all such surface species, allowing us to reveal the presence of surface oxides during reaction ignition and cooling-off.
|
|
