1. |
- Fornell, Anna, et al.
(author)
-
AdaptoCell : Microfluidics at MAX IV Laboratory
- 2022
-
In: 25th Swedish Conference on Macromolecular Structure and Function.
-
Conference paper (peer-reviewed)abstract
- The AdaptoCell project at MAX IV has developed a microfluidic sample delivery platform for academic and industrial users to enable studies of protein samples in solution and in microcrystals underflow. The platform is compatible with various X-ray techniques and has so far been integrated onto two beamlines at MAX IV: the CoSAXS beamline for small angle X-ray scattering studies and the Balder beamline for X-ray absorption spectroscopy studies. Initial implementation of the platform for serial crystallography sample delivery is ongoing and will be integrated onto the BioMAX and MicroMAX beamlines once commissioned. With this platform, we aim to meet the demand from our user community for studying proteins at physiologically relevant temperatures and give the ability to follow dynamical processes in situ as well as decreasing sample volumes and radiation damage.To determine the optimized flow rates and components for mixing etc. using different microfluidic chips, a dedicated off(beam)line test station with a microscope has been established at the Biolab. The Biolab also provides a number of characterization techniques, such as Dynamic Light Scattering, UV-Vis spectrophotometry, for quality control of the samples; as well as an anaerobic chamber for preparation and characterization of metalloproteins. The microfluidic flows are controlled via syringe pumps or a pressure-driven system. Channel design varies, depending on the needs of the experiment, from straight channel, cross-junction to herringbone micromixers etc. On-chip mixing of buffers with different viscosity, pH, ion strength and protein concentrations has been demonstrated successful and will be presented.
|
|
2. |
- Gericke, Sabrina Maria, et al.
(author)
-
In Situ H2 Reduction of Al2O3-Supported Ni- and Mo-Based Catalysts
- 2022
-
In: Catalysts. - : MDPI. - 2073-4344. ; 12:7
-
Journal article (peer-reviewed)abstract
- Nickel (Ni)-promoted Molybdenum (Mo)-based catalysts are used for hydrotreatment processes in the chemical industry where the catalysts are exposed to high-pressure H2 at elevated temperature. In this environment, the catalyst transforms into the active phase, which involves the reduction of the oxide. Here, we report on the first in situ study on the reduction of alumina supported Ni- and Mo-based catalysts in 1 mbar H2 using ambient-pressure X-ray photoelectron spectroscopy (APXPS). The study confirms that mixing Ni and Mo lowers the reduction temperature of both Ni- and Mo-oxide as compared to the monometallic catalysts and shows that the MoO3 reduction starts at a lower temperature than the reduction of NiO in NiMo/Al2O3 catalysts. Additionally, the reduction of Ni and Mo foil was directly compared to the reduction of the Al2O3-supported catalysts and it was observed that the reduction of the supported catalysts is more gradual than the reduction of the foils, indicating a strong interaction between the Ni/Mo and the alumina support. © 2022 by the authors.
|
|