1. |
- Aydin, M., et al.
(author)
-
Synthesis, magnetic and electrical characteristics of poly(2-thiophen-3-yl-malonic acid)/Fe(3)O(4) nanocomposite
- 2012
-
In: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 514, s. 45-53
-
Journal article (peer-reviewed)abstract
- Poly(2-thiophen-3-yl-malonic acid)/Fe(3)O(4) nanocomposite was synthesized by the precipitation of Fe(3)O(4) in the presence of poly(2-thiophen-3-yl-malonic acid) (PT3MA). Characterizations of the nanocomposite were performed by XRD, FT-IR, TEM, TGA, AC/DC conductivity and dielectric measurements. The capping of PT3MA around Fe(3)O(4) nanoparticles was confirmed by FTIR spectroscopy, the interaction being between bridging oxygen of the carboxylate and the nanoparticle surface through bidentate binding. The crystallite particle sizes of 6 +/- 3 nm and 7 +/- 3 nm were obtained from XRD line profile fitting and from TEM image analysis respectively, and they are in good agreement with each other. Magnetization measurements revealed that PT3MA coated magnetite particles do not saturate at higher fields. The material showed superparamagnetic character as revealed by the absence of coercivity and remnant magnetization. Magnetic particle size was calculated as 7.3 +/- 1.0 nm from the mean magnetization term in the Langevin function which is also in conformity with the values determined from TEM micrographs and XRD line profile fitting. The TEM particle size analysis of the nanoparticles revealed the presence of a slightly modified magnetically dead nanoparticle surface. AC and DC conductivity measurements were performed to elucidate the electrical conduction characteristics of the product.
|
|
2. |
|
|
3. |
|
|
4. |
- Aydin, M., et al.
(author)
-
Synthesis and characterization of poly(3-thiophene acetic acid)/Fe3O4 nanocomposite
- 2011
-
In: Polyhedron. - : Elsevier BV. - 0277-5387 .- 1873-3719. ; 30:6, s. 1120-1126
-
Journal article (peer-reviewed)abstract
- Poly(3-thiophene acetic acid)/Fe3O4 nanocomposite is synthesized by the precipitation of Fe3O4 in the presence of poly(3-thiophene acetic acid) (P3TAA). Structural, surface, morphological, thermal properties and conductivity characterization/evaluation of the nanocomposite were performed by XRD, FT-IR, TEM, TGA. and conductivity measurements, respectively. The capping of P3TAA around Fe3O4 nanoparticles was confirmed by FT-IR spectroscopy, the interaction being via bridging oxygens of the carboxylate and the nanoparticle surface through bidentate binding. The crystallite and particle size were obtained as 9 +/- 2 nm and 11 +/- 1 nm from XRD line profile fitting and TEM image analysis, respectively, which reveal nearly single crystalline nature of Fe3O4 nanoparticles. Magnetization measurements reveal that P3TAA coated magnetite particles do not saturate at higher fields. There is no coercivity and remanence revealing superparamagnetic character. Magnetic particle size calculated from the theoretical fitting as 9.1 nm which coincides the values determined from TEM micrographs and XRD line profile fitting. The comparison to the TEM particle size reveals slightly modified magnetically dead nanoparticle surface.
|
|
5. |
- Baykal, A., et al.
(author)
-
Acid Functionalized Multiwall Carbon Nanotube/Magnetite (MWCNT)-COOH/Fe3O4 Hybrid : Synthesis, Characterization and Conductivity Evaluation
- 2013
-
In: Journal of Inorganic and Organometallic Polymers and Materials. - : Springer Science and Business Media LLC. - 1574-1443 .- 1574-1451. ; 23:3, s. 726-735
-
Journal article (peer-reviewed)abstract
- A functionalized multiwall carbon nanotube (MWCNT)-COOH/Fe3O4 hybrid was fabricated by co-precipitation method. Fe3O4 nanoparticles were stably attached to the surface of carboxyl groups (COOH). The presence of Fe3O4 nanoparticles and their surface conjugation to MWCNT have been confirmed by XRD, TEM and FT-IR techniques. Magnetic evaluation revealed a superparamagnetic character of the hybrid and therefore the attached Fe3O4 nanoparticles. The crystallite size (9 +/- A 3 nm), particle size (9 +/- A 2 nm) and magnetic domain size estimated for Fe3O4 are consistent with each other, which reveal the single crystalline character of the nanoparticles. Electrical conductivity and dielectric behavior have also been characterized by utilizing impedance spectroscopy up to 3 MHz for an isotherm line varying from 293 to 393 K by 10 K steps. Electrical characteristics and its complex dielectric approaches might be elucidated with the existence of a conventional tunneling conduction mechanism of temperature-independency. The AC conductivity of MWCNT-COOH/Fe3O4 hybrid could also be a consequence of the estimations of the universal dynamic response.
|
|
6. |
- Birsoz, B., et al.
(author)
-
Synthesis and characterization of polypyrrole-BaFe12O19 nanocomposite
- 2010
-
In: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 493:1-2, s. 481-485
-
Journal article (peer-reviewed)abstract
- Polypyrrole-BaFe12O19 nanocomposite was successfully synthesized by an in situ polymerization of pyyrole in the presence of synthesized BaFe12O19 nanoparticles. Structural, morphological, electrical and magnetic properties of the nanocomposite were performed by XRD, FT-IR, TEM, TGA, VSM and ac conductivity measurements respectively. XRD analysis reveals the inorganic phase as bariumhexaferrite and TGA shows about 22 wt% loading of hexaferrite in the nanocomposite. FT-IR analysis indicates a successful conjugation of hexaferrite particles with polypyrrole. Magnetization measurements show that polypyrrole coating decreases the saturation magnetization of BaFe12O19 significantly. This reduction has been explained by the pinning of the surface spins by the possible adsorption of non-magnetic ions during the polymerization process. Interactions between the hard and impurity phases, determined using the Stoner-Wohlfarth theory, reveal that particles' single domain character and the coating destabilizes the remanence state of the polypyrrole-BaFe12O19 nanocomposite.
|
|
7. |
- Durmus, Z., et al.
(author)
-
Magnetic and dielectric characterization of alginic acid-Fe3O4 nanocomposite
- 2011
-
In: Polyhedron. - : Elsevier BV. - 0277-5387 .- 1873-3719. ; 30:2, s. 322-328
-
Journal article (peer-reviewed)abstract
- We have reported the synthesis of water dispersible alginic acid (AA)-Fe3O4 nanocomposites. The crystallite size was obtained as 9 +/- 2 nm from X-ray line profile fitting. As compared to the particle size of 9.2 nm obtained from TEM analysis, these particles show dominantly single crystalline nature. Dielectric analysis show that the real and imaginary parts of the permittivity of both pure AA and AA-Fe3O4 nano-composite obey the ionic polarization mechanism comprised of ionic conductivity and interfacial or space charge polarization. Magnetization measurements show that the saturation magnetization of AA-capped magnetite is significantly lower than the theoretical bulk value, partly due to the structural distortions on the surface of the particles. Moreover, magnetite does not saturate and exhibits no coercivity above a certain temperature, revealing superparamagnetic behavior of the nanocomposite above a blocking temperature, T-B. of similar to 175 K. The magnetic core size, determined by theoretical fitting to the magnetization data at room temperature, is 9.55 nm.
|
|
8. |
- Durmus, Z., et al.
(author)
-
Synthesis and characterization of poly(3-thiophenyl acetic acid) (P3TAA)-BaFe12O19 nanocomposite
- 2011
-
In: Polyhedron. - : Elsevier BV. - 0277-5387 .- 1873-3719. ; 30:7, s. 1349-1359
-
Journal article (peer-reviewed)abstract
- We have presented a method for the fabrication of poly(3-thiophenyl acetic acid) (P3TAA)-BaFe12O19 nanocomposites by the in situ polymerization of P3TAA in the presence of synthesized BaFe12O19 nanoparticles. The nanoparticles and the nanocomposite were analyzed by XRD, FTIR, TGA, TEM, VSM and conductivity techniques for structural and physicochemical characteristics. Crystallographic analysis revealed the phase as hexaferrite and X-ray line profile fitting yielded a crystallite size of 32 nm. The particles, observed by TEM, exhibit irregular shapes and sizes between 100 and 500 nm, revealing polycrystalline character when compared with the crystallite size from XRD. FTIR and TGA analysis results show that P3TAA is conjugated to the particle surface via a carboxylate group and that the composite has a polymer content of similar to 10%. Magnetic hysteresis curves do not saturate at high fields, which is a characteristic feature of fine particle systems with grain sizes smaller than 1 mu m. Conductivity measurements showed a semiconductor character of the nanocomposite.
|
|
9. |
|
|
10. |
|
|