1. |
- Chen, Hong, et al.
(author)
-
Construct Polyoxometalate Frameworks through Covalent Bonds
- 2015
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 54:17, s. 8699-8704
-
Journal article (peer-reviewed)abstract
- An emerging strategy for exploring the application of polyoxometalates (POMs) is to assemble POM clusters into open-framework materials, especially inorganic organic hybrid three-dimensional (3D) open-framework materials, via the introduction of different organic linkers between the POM clusters. This strategy has yielded a few 3D crystalline POMs of which a typical class is the group of polyoxometalate metal organic frameworks (POMMOFs). However, for reported POMMOFs, only coordination bonds are involved between the linkers and POM clusters, and it has not yet produced any covalently bonded polyoxometalate frameworks. Here, the concept of "covalently bonded POMs (CPOMs)" is developed. By using vanadoborates as an example, we showed that the 3D CPOMs can be obtained by a condensation reaction through the oxolation mechanism of polymer chemistry. In particular, suitable single crystals were harvested and characterized by single-crystal X-ray diffraction. This work forges a link among polymer science, POM chemistry, and open-framework materials by demonstrating that it is possible to use covalent bonds according to polymer chemistry principles to construct crystalline 3D open-framework POM materials.
|
|
2. |
- Daniel, Quentin, et al.
(author)
-
Water Oxidation Initiated by In Situ Dimerization of the Molecular Ru(pdc) Catalyst
- 2018
-
In: ACS Catalysis. - : AMER CHEMICAL SOC. - 2155-5435. ; 8:5, s. 4375-4382
-
Journal article (peer-reviewed)abstract
- The mononuclear ruthenium complex [Ru(pdc)L-3] (H(2)pdc = 2,6-pyridinedicarboxylic acid, L = N-heterocycles such as 4-picoline) has previously shown promising catalytic efficiency toward water oxidation, both in homogeneous solutions and anchored on electrode surfaces. However, the detailed water oxidation mechanism catalyzed by this type of complex has remained unclear. In order to deepen understanding of this type of catalyst, in the present study, [Ru(pdc)(py)(3)] (py = pyridine) has been synthesized, and the detailed catalytic mechanism has been studied by electrochemistry, UV-vis, NMR, MS, and X-ray crystallography. Interestingly, it was found that once having reached the Ru-IV state, this complex promptly formed a stable ruthenium dimer [Ru-III(pdc)(py)(2)-O-Ru-IV(pdc)(py)(2)](+). Further investigations suggested that the present dimer, after one pyridine ligand exchange with water to form [Ru-III(pdc)(py)(2)-O-Ru-IV(pdc)(py)(H2O)](+), was the true active species to catalyze water oxidation in homogeneous solutions.
|
|
3. |
- Fan, Ke, et al.
(author)
-
Immobilization of a Molecular Ruthenium Catalyst on Hematite Nanorod Arrays for Water Oxidation with Stable Photocurrent
- 2015
-
In: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 8:19, s. 3242-3247
-
Journal article (peer-reviewed)abstract
- Photoelectrochemical (PEC) cells for light-driven water splitting are prepared using hematite nanorod arrays on conductive glass as the photoanode. These devices improve the photocurrent of the hematite-based photoanode for water splitting, owing to fewer surface traps and decreased electron recombination resulting from the one-dimensional structure. By employing a molecular ruthenium co-catalyst, which contains a strong 2,6-pyridine-dicarboxylic acid anchoring group at the hematite photoanode, the photocurrent of the PEC cell is enhanced with high stability for over 10000s in a 1M KOH solution. This approach can pave a route for combining one-dimensional nanomaterials and molecular catalysts to split water with high efficiency and stability.
|
|
4. |
- Gabrielsson, Erik, et al.
(author)
-
Dipicolinic acid : a strong anchoring group with tunable redox and spectral behavior for stable dye-sensitized solar cells
- 2015
-
In: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1359-7345 .- 1364-548X. ; 51:18, s. 3858-3861
-
Journal article (peer-reviewed)abstract
- Dipicolinic acidwas investigated as a new anchoring group for DSSCs. A pilot dye (PD2) bearing this new anchoring group was found to adsorb significantly stronger to TiO2 than its cyanoacrylic acid analogue. The electrolyte composition was found to have a strong effect on the photoelectrochemical properties of the adsorbed dye in the device, allowing the dye LUMO energy to be tuned by 0.5 eV. Using a pyridine-free electrolyte, panchromatic absorption of the dye on TiO2 extending to 900 nm has been achieved. Solar cells using PD2 and a Co(bpy)(3) based electrolyte showed unique stability under simulated sunlight and elevated temperatures.
|
|
5. |
- Hao, Yan, et al.
(author)
-
Can aliphatic anchoring groups be utilised with dyes for p-type dye sensitized solar cells?
- 2016
-
In: Dalton Transactions. - : Royal Society of Chemistry. - 1477-9226 .- 1477-9234. ; 45:18, s. 7708-7719
-
Journal article (peer-reviewed)abstract
- A series of novel laterally anchoring tetrahydroquinoline derivatives have been synthesized and investigated for their use in NiO-based p-type dye-sensitized solar cells. The kinetics of charge injection and recombination at the NiO-dye interface for these dyes have been thoroughly investigated using pico-second transient absorption and time-resolved infrared measurements. It was revealed that despite the anchoring unit being electronically decoupled from the dye structure, charge injection occurred on a sub picosecond timescale. However, rapid recombination was also observed due to the close proximity of the electron acceptor on the dyes to the NiO surface, ultimately limiting the performance of the p-DSCs.
|
|
6. |
- Hou, Jungang, et al.
(author)
-
Active Sites Intercalated Ultrathin Carbon Sheath on Nanowire Arrays as Integrated Core-Shell Architecture : Highly Efficient and Durable Electrocatalysts for Overall Water Splitting
- 2017
-
In: Small. - : Wiley-VCH Verlagsgesellschaft. - 1613-6810 .- 1613-6829. ; 13:46
-
Journal article (peer-reviewed)abstract
- The development of active bifunctional electrocatalysts with low cost and earth-abundance toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a great challenge for overall water splitting. Herein, metallic Ni4Mo nanoalloys are firstly implanted on the surface of NiMoOx nanowires array (NiMo/NiMoOx) as metal/metal oxides hybrid. Inspired by the superiority of carbon conductivity, an ultrathin nitrogen-doped carbon sheath intercalated NiMo/NiMoOx (NC/NiMo/NiMoOx) nanowires as integrated core-shell architecture are constructed. The integrated NC/NiMo/NiMoOx array exhibits an overpotential of 29 mV at 10 mA cm(-2) and a low Tafel slope of 46 mV dec(-1) for HER due to the abundant active sites, fast electron transport, low charge-transfer resistance, unique architectural structure and synergistic effect of carbon sheath, nanoalloys, and oxides. Moreover, as OER catalysts, the NC/NiMo/NiMoOx hybrids require an overpotential of 284 mV at 10 mA cm(-2). More importantly, the NC/NiMo/NiMoOx array as a highly active and stable electrocatalyst approaches approximate to 10 mA cm(-2) at a voltage of 1.57 V, opening an avenue to the rational design and fabrication of the promising electrode materials with architecture structures toward the electrochemical energy storage and conversion.
|
|
7. |
- Hou, Jungang, et al.
(author)
-
Atomically Thin Mesoporous In2O3-x/In2S3 Lateral Heterostructures Enabling Robust Broadband-Light Photo-Electrochemical Water Splitting
- 2018
-
In: Advanced Energy Materials. - : Wiley-VCH Verlagsgesellschaft. - 1614-6832 .- 1614-6840. ; 8:9
-
Journal article (peer-reviewed)abstract
- Atomically thin 2D heterostructures have opened new realms in electronic and optoelectronic devices. Herein, 2D lateral heterostructures of mesoporous In2O3-x/In2S3 atomic layers are synthesized through the in situ oxidation of In2S3 atomic layers by an oxygen plasma-induced strategy. Based on experimental observations and theoretical calculations, the prolonged charge carrier lifetime and increased electron density reveal the efficient photoexcited carrier transport and separation in the In2O3-x/In2S3 layers by interfacial bonding at the atomic level. As expected, the synergistic structural and electronic modulations of the In2O3-x/In2S3 layers generate a photocurrent of 1.28 mA cm(-2) at 1.23 V versus a reversible hydrogen electrode, nearly 21 and 79 times higher than those of the In2S3 atomic layers and bulk counterpart, respectively. Due to the large surface area, abundant active sites, broadband-light harvesting ability, and effective charge transport pathways, the In2O3-x/In2S3 layers build efficient pathways for photoexcited charge in the 2D semiconductive channels, expediting charge transport and kinetic processes and enhancing the robust broadband-light photo-electrochemical water splitting performance. This work paves new avenues for the exploration and design of atomically thin 2D lateral heterostructures toward robust photo-electrochemical applications and solar energy utilization.
|
|
8. |
- Hou, Jungang, et al.
(author)
-
Electrical Behavior and Electron Transfer Modulation of Nickel-Copper Nanoalloys Confined in Nickel-Copper Nitrides Nanowires Array Encapsulated in Nitrogen-Doped Carbon Framework as Robust Bifunctional Electrocatalyst for Overall Water Splitting
- 2018
-
In: Advanced Functional Materials. - : Wiley-VCH Verlagsgesellschaft. - 1616-301X .- 1616-3028. ; 28:37
-
Journal article (peer-reviewed)abstract
- Probing robust electrocatalysts for overall water splitting is vital in energy conversion. However, the catalytic efficiency of reported catalysts is still limited by few active sites, low conductivity, and/or discrete electron transport. Herein, bimetallic nickel-copper (NiCu) nanoalloys confined in mesoporous nickel-copper nitride (NiCuN) nanowires array encapsulated in nitrogen-doped carbon (NC) framework (NC-NiCu-NiCuN) is constructed by carbonization-/nitridation-induced in situ growth strategies. The in situ coupling of NiCu nanoalloys, NiCuN, and carbon layers through dual modulation of electrical behavior and electron transfer is not only beneficial to continuous electron transfer throughout the whole system, but also promotes the enhancement of electrical conductivity and the accessibility of active sites. Owing to strong synergetic coupling effect, such NC-NiCu-NiCuN electrocatalyst exhibits the best hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance with a current density of 10 mA cm(-2) at low overpotentials of 93 mV for HER and 232 mV for OER, respectively. As expected, a two-electrode cell using NC-NiCu-NiCuN is constructed to deliver 10 mA cm(-2) water-splitting current at low cell voltage of 1.56 V with remarkable durability over 50 h. This work serves as a promising platform to explore the design and synthesis of robust bifunctional electrocatalyst for overall water splitting.
|
|
9. |
- Hou, Jungang, et al.
(author)
-
Graphene Dots Embedded Phosphide Nanosheet-Assembled Tubular Arrays for Efficient and Stable Overall Water Splitting
- 2017
-
In: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 9:29, s. 24600-24607
-
Journal article (peer-reviewed)abstract
- Bifunctional electrocatalysts are highly desired for overall water splitting. Herein, the design and fabrication of three-dimensional (3D) hierarchical earth-abundant transition bimetallic phosphide arrays constructed by one-dimensional tubular array that was derived from assembling two-dimensional nanosheet framework has been reported by tailoring the Co/Ni ratio and tunable morphologies, and zero-dimensional (0D) graphene dots were embedded on Co-Ni phosphide matrix to construct 0D/2D tubular array as a highly efficient electrode in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). On the basis of advanced merits, such as the high surface-active sites, well-dispersed graphene dots, and enhanced electron transfer capacity as well as the confinement effect of the graphene dots on the nanosheets, the integrated GDs/Co0.8Ni0.2P tubular arrays as anode and cathode exhibit excellent OER and HER performance. By use of GDs/Co0.8Ni0.2 arrays in the two-electrode setup of the device, a remarkable electrocatalytic performance for full water splitting has been achieved with a high current density of 10 mA cm-2 at 1.54 V and outstanding long-term operation stability in an alkaline environment, indicating a promising system based on nonprecious-metal electrocatalysts toward potential practical devices of overall water splitting.
|
|
10. |
- Hou, Jungang, et al.
(author)
-
Inorganic Colloidal Perovskite Quantum Dots for Robust Solar CO2 Reduction
- 2017
-
In: Chemistry - A European Journal. - : Wiley-VCH Verlagsgesellschaft. - 0947-6539 .- 1521-3765. ; 23:40, s. 9481-9485
-
Journal article (peer-reviewed)abstract
- Inorganic perovskite quantum dots as optoelectronic materials have attracted enormous attention in light-harvesting and emitting devices. However, photocatalytic conversion based on inorganic perovskite halides has not been reported. Here, we have synthesized colloidal quantum dots (QDs, 3-12 nm) of cesium lead halide perovskites (CsPbBr3) as a new type of photocatalytic material. The band gap energies and photoluminescence (PL) spectra are tunable over the visible spectral region according to quantum size effects on an atomic scale. The increased carrier lifetime revealed by time-resolved PL spectra, indicates the efficient electron-hole separation and transfer. As expected, the CsPbBr3 QDs with high selectivity of greater than 99% achieve an efficient yield of 20.9 mmolg(-1) towards solar CO2 reduction. This work has opened a new avenue for inorganic colloidal perovskite materials as efficient photocatalysts to convert CO2 into valuable fuels.
|
|