1. |
- Aamodt, K., et al.
(author)
-
The ALICE experiment at the CERN LHC
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Research review (peer-reviewed)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
2. |
|
|
3. |
- Ablikim, M., et al.
(author)
-
Measurements of (XcJ)-> K+K-K+K- decays
- 2006
-
In: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 642:3, s. 197-202
-
Journal article (peer-reviewed)abstract
- Using 14M psi(2S) events taken with the BESII detector, chi(cJ) -> 2(K+K-) decays are studied. For the four-kaon final state, the branching fractions are B(chi(c0,1,2) ->.2(K+K-)) = (3.48 +/- 0.23 +/- 0.47) x 10(-3), (0.70 +/- 0.13 +/- 0.10) x 10(-3), and (2.17 +/- 0.20 +/- 0.31) x 10(-3). For the phi K+K- final state, the branching fractions, which are measured for the first time, are B(chi(c0,1,2) -> phi K+K-) = (1.03 +/- 0.22 +/- 0.15) x 10(-3), (0.46 +/- 0.16 +/- 0.06) x 10(-3), and (1.67 +/- 0.26 +/- 0.24) x 10(-4). For the phi phi final state, B(chi(c0,2) -> phi phi) = (0.94 +/- 0.21 +/- 0.13) x 10(-3) and (1.70 +/- 0.30 +/- 0.25) x 10(-3).
|
|
4. |
|
|
5. |
- Arulkumaran, S., et al.
(author)
-
Enhancement of both direct-current and microwave characteristics of AlGaN/GaN high-electron-mobility transistors by furnace annealing
- 2006
-
In: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 88:2
-
Journal article (peer-reviewed)abstract
- The enhancement of both direct-current (dc) and microwave characteristics of AlGaN/GaN high-electron-mobility transistors (HEMTs) were demonstrated by conventional furnace annealing at 400 degrees C for 5 min. Due to the improvement in Ni/Au Schottky contact properties by furnace annealing, about 17%, 34%, 23%, and 25% of enhancements in maximum drain current density, maximum extrinsic transconductance (g(m max)), cutoff frequency and maximum oscillation frequency were observed, respectively. A positive threshold voltage shift and the increase in g(m max) can also be correlated to the improved Schottky parameters such as ideality factor and barrier height. The annealed devices exhibited low reverse gate-leakage-current by more than three orders of magnitude and low drain-leakage-current by two orders of magnitude. Correspondingly, the devices exhibited 55% of higher breakdown voltage after annealing. The furnace annealing is an effective and viable means to enhance both dc and microwave characteristics of AlGaN/GaN HEMTs.
|
|
6. |
|
|